This allows changes to be commited from cfg80211 functions.
Signed-off-by: David Kilroy <kilroyd@xxxxxxxxxxxxxx>
---
drivers/net/wireless/orinoco/hw.c | 227 ++++++++++++++++++++++++++
drivers/net/wireless/orinoco/hw.h | 1 +
drivers/net/wireless/orinoco/main.c | 297 ++++++++---------------------------
drivers/net/wireless/orinoco/main.h | 3 +-
drivers/net/wireless/orinoco/wext.c | 35 +----
5 files changed, 294 insertions(+), 269 deletions(-)
diff --git a/drivers/net/wireless/orinoco/hw.c b/drivers/net/wireless/orinoco/hw.c
index eaa89d3..56627d9 100644
--- a/drivers/net/wireless/orinoco/hw.c
+++ b/drivers/net/wireless/orinoco/hw.c
@@ -406,6 +406,233 @@ void orinoco_get_ratemode_cfg(int ratemode, int *bitrate, int *automatic)
*automatic = bitrate_table[ratemode].automatic;
}
+int orinoco_hw_program_rids(struct orinoco_private *priv)
+{
+ struct net_device *dev = priv->ndev;
+ hermes_t *hw = &priv->hw;
+ int err;
+ struct hermes_idstring idbuf;
+
+ /* Set the MAC address */
+ err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR,
+ HERMES_BYTES_TO_RECLEN(ETH_ALEN), dev->dev_addr);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting MAC address\n",
+ dev->name, err);
+ return err;
+ }
+
+ /* Set up the link mode */
+ err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFPORTTYPE,
+ priv->port_type);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting port type\n",
+ dev->name, err);
+ return err;
+ }
+ /* Set the channel/frequency */
+ if (priv->channel != 0 && priv->iw_mode != IW_MODE_INFRA) {
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFOWNCHANNEL,
+ priv->channel);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting channel %d\n",
+ dev->name, err, priv->channel);
+ return err;
+ }
+ }
+
+ if (priv->has_ibss) {
+ u16 createibss;
+
+ if ((strlen(priv->desired_essid) == 0) && (priv->createibss)) {
+ printk(KERN_WARNING "%s: This firmware requires an "
+ "ESSID in IBSS-Ad-Hoc mode.\n", dev->name);
+ /* With wvlan_cs, in this case, we would crash.
+ * hopefully, this driver will behave better...
+ * Jean II */
+ createibss = 0;
+ } else {
+ createibss = priv->createibss;
+ }
+
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFCREATEIBSS,
+ createibss);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting CREATEIBSS\n",
+ dev->name, err);
+ return err;
+ }
+ }
+
+ /* Set the desired BSSID */
+ err = __orinoco_hw_set_wap(priv);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting AP address\n",
+ dev->name, err);
+ return err;
+ }
+
+ /* Set the desired ESSID */
+ idbuf.len = cpu_to_le16(strlen(priv->desired_essid));
+ memcpy(&idbuf.val, priv->desired_essid, sizeof(idbuf.val));
+ /* WinXP wants partner to configure OWNSSID even in IBSS mode. (jimc) */
+ err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNSSID,
+ HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid)+2),
+ &idbuf);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting OWNSSID\n",
+ dev->name, err);
+ return err;
+ }
+ err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFDESIREDSSID,
+ HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid)+2),
+ &idbuf);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting DESIREDSSID\n",
+ dev->name, err);
+ return err;
+ }
+
+ /* Set the station name */
+ idbuf.len = cpu_to_le16(strlen(priv->nick));
+ memcpy(&idbuf.val, priv->nick, sizeof(idbuf.val));
+ err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNNAME,
+ HERMES_BYTES_TO_RECLEN(strlen(priv->nick)+2),
+ &idbuf);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting nickname\n",
+ dev->name, err);
+ return err;
+ }
+
+ /* Set AP density */
+ if (priv->has_sensitivity) {
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFSYSTEMSCALE,
+ priv->ap_density);
+ if (err) {
+ printk(KERN_WARNING "%s: Error %d setting SYSTEMSCALE. "
+ "Disabling sensitivity control\n",
+ dev->name, err);
+
+ priv->has_sensitivity = 0;
+ }
+ }
+
+ /* Set RTS threshold */
+ err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFRTSTHRESHOLD,
+ priv->rts_thresh);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting RTS threshold\n",
+ dev->name, err);
+ return err;
+ }
+
+ /* Set fragmentation threshold or MWO robustness */
+ if (priv->has_mwo)
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFMWOROBUST_AGERE,
+ priv->mwo_robust);
+ else
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFFRAGMENTATIONTHRESHOLD,
+ priv->frag_thresh);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting fragmentation\n",
+ dev->name, err);
+ return err;
+ }
+
+ /* Set bitrate */
+ err = __orinoco_hw_set_bitrate(priv);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting bitrate\n",
+ dev->name, err);
+ return err;
+ }
+
+ /* Set power management */
+ if (priv->has_pm) {
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFPMENABLED,
+ priv->pm_on);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting up PM\n",
+ dev->name, err);
+ return err;
+ }
+
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFMULTICASTRECEIVE,
+ priv->pm_mcast);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting up PM\n",
+ dev->name, err);
+ return err;
+ }
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFMAXSLEEPDURATION,
+ priv->pm_period);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting up PM\n",
+ dev->name, err);
+ return err;
+ }
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFPMHOLDOVERDURATION,
+ priv->pm_timeout);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting up PM\n",
+ dev->name, err);
+ return err;
+ }
+ }
+
+ /* Set preamble - only for Symbol so far... */
+ if (priv->has_preamble) {
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFPREAMBLE_SYMBOL,
+ priv->preamble);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting preamble\n",
+ dev->name, err);
+ return err;
+ }
+ }
+
+ /* Set up encryption */
+ if (priv->has_wep || priv->has_wpa) {
+ err = __orinoco_hw_setup_enc(priv);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d activating encryption\n",
+ dev->name, err);
+ return err;
+ }
+ }
+
+ if (priv->iw_mode == IW_MODE_MONITOR) {
+ /* Enable monitor mode */
+ dev->type = ARPHRD_IEEE80211;
+ err = hermes_docmd_wait(hw, HERMES_CMD_TEST |
+ HERMES_TEST_MONITOR, 0, NULL);
+ } else {
+ /* Disable monitor mode */
+ dev->type = ARPHRD_ETHER;
+ err = hermes_docmd_wait(hw, HERMES_CMD_TEST |
+ HERMES_TEST_STOP, 0, NULL);
+ }
+ if (err)
+ return err;
+
+ /* Reset promiscuity / multicast*/
+ priv->promiscuous = 0;
+ priv->mc_count = 0;
+
+ return 0;
+}
+
/* Get tsc from the firmware */
int orinoco_hw_get_tkip_iv(struct orinoco_private *priv, int key, u8 *tsc)
{
diff --git a/drivers/net/wireless/orinoco/hw.h b/drivers/net/wireless/orinoco/hw.h
index 84c108c..210c2b1 100644
--- a/drivers/net/wireless/orinoco/hw.h
+++ b/drivers/net/wireless/orinoco/hw.h
@@ -29,6 +29,7 @@ int orinoco_hw_allocate_fid(struct orinoco_private *priv);
int orinoco_get_bitratemode(int bitrate, int automatic);
void orinoco_get_ratemode_cfg(int ratemode, int *bitrate, int *automatic);
+int orinoco_hw_program_rids(struct orinoco_private *priv);
int orinoco_hw_get_tkip_iv(struct orinoco_private *priv, int key, u8 *tsc);
int __orinoco_hw_set_bitrate(struct orinoco_private *priv);
int orinoco_hw_get_act_bitrate(struct orinoco_private *priv, int *bitrate);
diff --git a/drivers/net/wireless/orinoco/main.c b/drivers/net/wireless/orinoco/main.c
index 7667747..a7ec56c 100644
--- a/drivers/net/wireless/orinoco/main.c
+++ b/drivers/net/wireless/orinoco/main.c
@@ -210,9 +210,10 @@ struct orinoco_rx_data {
/* Function prototypes */
/********************************************************************/
-static void __orinoco_set_multicast_list(struct net_device *dev);
+static int __orinoco_set_multicast_list(struct net_device *dev);
static int __orinoco_up(struct orinoco_private *priv);
static int __orinoco_down(struct orinoco_private *priv);
+static int __orinoco_commit(struct orinoco_private *priv);
/********************************************************************/
/* Internal helper functions */
@@ -1524,7 +1525,7 @@ static int __orinoco_up(struct orinoco_private *priv)
netif_carrier_off(dev); /* just to make sure */
- err = __orinoco_program_rids(dev);
+ err = __orinoco_commit(priv);
if (err) {
printk(KERN_ERR "%s: Error %d configuring card\n",
dev->name, err);
@@ -1593,237 +1594,7 @@ static int orinoco_reinit_firmware(struct orinoco_private *priv)
return err;
}
-int __orinoco_program_rids(struct net_device *dev)
-{
- struct orinoco_private *priv = ndev_priv(dev);
- hermes_t *hw = &priv->hw;
- int err;
- struct hermes_idstring idbuf;
-
- /* Set the MAC address */
- err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR,
- HERMES_BYTES_TO_RECLEN(ETH_ALEN), dev->dev_addr);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting MAC address\n",
- dev->name, err);
- return err;
- }
-
- /* Set up the link mode */
- err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFPORTTYPE,
- priv->port_type);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting port type\n",
- dev->name, err);
- return err;
- }
- /* Set the channel/frequency */
- if (priv->channel != 0 && priv->iw_mode != IW_MODE_INFRA) {
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFOWNCHANNEL,
- priv->channel);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting channel %d\n",
- dev->name, err, priv->channel);
- return err;
- }
- }
-
- if (priv->has_ibss) {
- u16 createibss;
-
- if ((strlen(priv->desired_essid) == 0) && (priv->createibss)) {
- printk(KERN_WARNING "%s: This firmware requires an "
- "ESSID in IBSS-Ad-Hoc mode.\n", dev->name);
- /* With wvlan_cs, in this case, we would crash.
- * hopefully, this driver will behave better...
- * Jean II */
- createibss = 0;
- } else {
- createibss = priv->createibss;
- }
-
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFCREATEIBSS,
- createibss);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting CREATEIBSS\n",
- dev->name, err);
- return err;
- }
- }
-
- /* Set the desired BSSID */
- err = __orinoco_hw_set_wap(priv);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting AP address\n",
- dev->name, err);
- return err;
- }
- /* Set the desired ESSID */
- idbuf.len = cpu_to_le16(strlen(priv->desired_essid));
- memcpy(&idbuf.val, priv->desired_essid, sizeof(idbuf.val));
- /* WinXP wants partner to configure OWNSSID even in IBSS mode. (jimc) */
- err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNSSID,
- HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid)+2),
- &idbuf);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting OWNSSID\n",
- dev->name, err);
- return err;
- }
- err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFDESIREDSSID,
- HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid)+2),
- &idbuf);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting DESIREDSSID\n",
- dev->name, err);
- return err;
- }
-
- /* Set the station name */
- idbuf.len = cpu_to_le16(strlen(priv->nick));
- memcpy(&idbuf.val, priv->nick, sizeof(idbuf.val));
- err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNNAME,
- HERMES_BYTES_TO_RECLEN(strlen(priv->nick)+2),
- &idbuf);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting nickname\n",
- dev->name, err);
- return err;
- }
-
- /* Set AP density */
- if (priv->has_sensitivity) {
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFSYSTEMSCALE,
- priv->ap_density);
- if (err) {
- printk(KERN_WARNING "%s: Error %d setting SYSTEMSCALE. "
- "Disabling sensitivity control\n",
- dev->name, err);
-
- priv->has_sensitivity = 0;
- }
- }
-
- /* Set RTS threshold */
- err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFRTSTHRESHOLD,
- priv->rts_thresh);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting RTS threshold\n",
- dev->name, err);
- return err;
- }
-
- /* Set fragmentation threshold or MWO robustness */
- if (priv->has_mwo)
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFMWOROBUST_AGERE,
- priv->mwo_robust);
- else
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFFRAGMENTATIONTHRESHOLD,
- priv->frag_thresh);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting fragmentation\n",
- dev->name, err);
- return err;
- }
-
- /* Set bitrate */
- err = __orinoco_hw_set_bitrate(priv);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting bitrate\n",
- dev->name, err);
- return err;
- }
-
- /* Set power management */
- if (priv->has_pm) {
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFPMENABLED,
- priv->pm_on);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting up PM\n",
- dev->name, err);
- return err;
- }
-
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFMULTICASTRECEIVE,
- priv->pm_mcast);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting up PM\n",
- dev->name, err);
- return err;
- }
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFMAXSLEEPDURATION,
- priv->pm_period);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting up PM\n",
- dev->name, err);
- return err;
- }
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFPMHOLDOVERDURATION,
- priv->pm_timeout);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting up PM\n",
- dev->name, err);
- return err;
- }
- }
-
- /* Set preamble - only for Symbol so far... */
- if (priv->has_preamble) {
- err = hermes_write_wordrec(hw, USER_BAP,
- HERMES_RID_CNFPREAMBLE_SYMBOL,
- priv->preamble);
- if (err) {
- printk(KERN_ERR "%s: Error %d setting preamble\n",
- dev->name, err);
- return err;
- }
- }
-
- /* Set up encryption */
- if (priv->has_wep || priv->has_wpa) {
- err = __orinoco_hw_setup_enc(priv);
- if (err) {
- printk(KERN_ERR "%s: Error %d activating encryption\n",
- dev->name, err);
- return err;
- }
- }
-
- if (priv->iw_mode == IW_MODE_MONITOR) {
- /* Enable monitor mode */
- dev->type = ARPHRD_IEEE80211;
- err = hermes_docmd_wait(hw, HERMES_CMD_TEST |
- HERMES_TEST_MONITOR, 0, NULL);
- } else {
- /* Disable monitor mode */
- dev->type = ARPHRD_ETHER;
- err = hermes_docmd_wait(hw, HERMES_CMD_TEST |
- HERMES_TEST_STOP, 0, NULL);
- }
- if (err)
- return err;
-
- /* Set promiscuity / multicast*/
- priv->promiscuous = 0;
- priv->mc_count = 0;
-
- /* FIXME: what about netif_tx_lock */
- __orinoco_set_multicast_list(dev);
-
- return 0;
-}
-
-/* FIXME: return int? */
-static void
+static int
__orinoco_set_multicast_list(struct net_device *dev)
{
struct orinoco_private *priv = ndev_priv(dev);
@@ -1843,6 +1614,8 @@ __orinoco_set_multicast_list(struct net_device *dev)
err = __orinoco_hw_set_multicast_list(priv, dev->mc_list, mc_count,
promisc);
+
+ return err;
}
/* This must be called from user context, without locks held - use
@@ -1920,6 +1693,64 @@ void orinoco_reset(struct work_struct *work)
printk(KERN_ERR "%s: Device has been disabled!\n", dev->name);
}
+static int __orinoco_commit(struct orinoco_private *priv)
+{
+ struct net_device *dev = priv->ndev;
+ int err = 0;
+
+ err = orinoco_hw_program_rids(priv);
+
+ /* FIXME: what about netif_tx_lock */
+ (void) __orinoco_set_multicast_list(dev);
+
+ return err;
+}
+
+/* Ensures configuration changes are applied. May result in a reset.
+ * The caller should hold priv->lock
+ */
+int orinoco_commit(struct orinoco_private *priv)
+{
+ struct net_device *dev = priv->ndev;
+ hermes_t *hw = &priv->hw;
+ int err;
+
+ if (priv->broken_disableport) {
+ schedule_work(&priv->reset_work);
+ return 0;
+ }
+
+ err = hermes_disable_port(hw, 0);
+ if (err) {
+ printk(KERN_WARNING "%s: Unable to disable port "
+ "while reconfiguring card\n", dev->name);
+ priv->broken_disableport = 1;
+ goto out;
+ }
+
+ err = __orinoco_commit(priv);
+ if (err) {
+ printk(KERN_WARNING "%s: Unable to reconfigure card\n",
+ dev->name);
+ goto out;
+ }
+
+ err = hermes_enable_port(hw, 0);
+ if (err) {
+ printk(KERN_WARNING "%s: Unable to enable port while reconfiguring card\n",
+ dev->name);
+ goto out;
+ }
+
+ out:
+ if (err) {
+ printk(KERN_WARNING "%s: Resetting instead...\n", dev->name);
+ schedule_work(&priv->reset_work);
+ err = 0;
+ }
+ return err;
+}
+
/********************************************************************/
/* Interrupt handler */
/********************************************************************/
diff --git a/drivers/net/wireless/orinoco/main.h b/drivers/net/wireless/orinoco/main.h
index af2bae4..21ab36c 100644
--- a/drivers/net/wireless/orinoco/main.h
+++ b/drivers/net/wireless/orinoco/main.h
@@ -29,10 +29,9 @@ struct net_device;
struct work_struct;
void set_port_type(struct orinoco_private *priv);
-int __orinoco_program_rids(struct net_device *dev);
+int orinoco_commit(struct orinoco_private *priv);
void orinoco_reset(struct work_struct *work);
-
/* Information element helpers - find a home for these... */
static inline u8 *orinoco_get_ie(u8 *data, size_t len,
enum ieee80211_eid eid)
diff --git a/drivers/net/wireless/orinoco/wext.c b/drivers/net/wireless/orinoco/wext.c
index 74892e1..4c20b1d 100644
--- a/drivers/net/wireless/orinoco/wext.c
+++ b/drivers/net/wireless/orinoco/wext.c
@@ -2163,49 +2163,16 @@ static int orinoco_ioctl_commit(struct net_device *dev,
char *extra)
{
struct orinoco_private *priv = ndev_priv(dev);
- struct hermes *hw = &priv->hw;
unsigned long flags;
int err = 0;
if (!priv->open)
return 0;
- if (priv->broken_disableport) {
- orinoco_reset(&priv->reset_work);
- return 0;
- }
-
if (orinoco_lock(priv, &flags) != 0)
return err;
- err = hermes_disable_port(hw, 0);
- if (err) {
- printk(KERN_WARNING "%s: Unable to disable port "
- "while reconfiguring card\n", dev->name);
- priv->broken_disableport = 1;
- goto out;
- }
-
- err = __orinoco_program_rids(dev);
- if (err) {
- printk(KERN_WARNING "%s: Unable to reconfigure card\n",
- dev->name);
- goto out;
- }
-
- err = hermes_enable_port(hw, 0);
- if (err) {
- printk(KERN_WARNING "%s: Unable to enable port while reconfiguring card\n",
- dev->name);
- goto out;
- }
-
- out:
- if (err) {
- printk(KERN_WARNING "%s: Resetting instead...\n", dev->name);
- schedule_work(&priv->reset_work);
- err = 0;
- }
+ err = orinoco_commit(priv);
orinoco_unlock(priv, &flags);
return err;
--
1.6.0.6
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
