The scratch pad register is used to store firmware status after
firmware is downloaded and initialized. After firmware status is
verified OK, the same register is used to store RX packet length.
Hence the firmware status code is no longer valid afterwards.
SD8688 firmware introduces a new register for firmware status
which will never be overwritten.
Signed-off-by: Bing Zhao <bzhao@xxxxxxxxxxx>
---
drivers/net/wireless/libertas/if_sdio.c | 20 ++++++++++++++++++--
drivers/net/wireless/libertas/if_sdio.h | 1 +
2 files changed, 19 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c
index 478d766..18132d4 100644
--- a/drivers/net/wireless/libertas/if_sdio.c
+++ b/drivers/net/wireless/libertas/if_sdio.c
@@ -119,15 +119,29 @@ struct if_sdio_card {
/* I/O */
/********************************************************************/
+/*
+ * For SD8385/SD8686, this function reads firmware status after
+ * the image is downloaded, or reads RX packet length when
+ * interrupt (with IF_SDIO_H_INT_UPLD bit set) is received.
+ * For SD8688, this function reads firmware status only.
+ */
static u16 if_sdio_read_scratch(struct if_sdio_card *card, int *err)
{
int ret, reg;
u16 scratch;
- if (card->model == IF_SDIO_MODEL_8385)
+ switch (card->model) {
+ case IF_SDIO_MODEL_8385:
reg = IF_SDIO_SCRATCH_OLD;
- else
+ break;
+ case IF_SDIO_MODEL_8686:
reg = IF_SDIO_SCRATCH;
+ break;
+ case IF_SDIO_MODEL_8688:
+ default: /* for newer chipsets */
+ reg = IF_SDIO_FW_STATUS;
+ break;
+ }
scratch = sdio_readb(card->func, reg, &ret);
if (!ret)
@@ -706,6 +720,8 @@ static int if_sdio_prog_firmware(struct if_sdio_card *card)
if (ret)
goto out;
+ lbs_deb_sdio("firmware status = %#x\n", scratch);
+
if (scratch == IF_SDIO_FIRMWARE_OK) {
lbs_deb_sdio("firmware already loaded\n");
goto success;
diff --git a/drivers/net/wireless/libertas/if_sdio.h b/drivers/net/wireless/libertas/if_sdio.h
index d3a4fbe..60c9b2f 100644
--- a/drivers/net/wireless/libertas/if_sdio.h
+++ b/drivers/net/wireless/libertas/if_sdio.h
@@ -42,6 +42,7 @@
#define IF_SDIO_SCRATCH 0x34
#define IF_SDIO_SCRATCH_OLD 0x80fe
+#define IF_SDIO_FW_STATUS 0x40
#define IF_SDIO_FIRMWARE_OK 0xfedc
#define IF_SDIO_RX_LEN 0x42
--
1.5.3.6
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
