This patch replace a few constant magics which may affected the device when operating in a 40MHz channel. Signed-off-by: Christian Lamparter <chunkeey@xxxxxx> --- diff --git a/drivers/net/wireless/ath/ar9170/phy.c b/drivers/net/wireless/ath/ar9170/phy.c index 6ce2075..ffdb0c8 100644 --- a/drivers/net/wireless/ath/ar9170/phy.c +++ b/drivers/net/wireless/ath/ar9170/phy.c @@ -401,7 +401,7 @@ int ar9170_init_phy(struct ar9170 *ar, enum ieee80211_band band) int i, err; u32 val; bool is_2ghz = band == IEEE80211_BAND_2GHZ; - bool is_40mhz = false; /* XXX: for now */ + bool is_40mhz = conf_is_ht40(&ar->hw->conf); ar9170_regwrite_begin(ar); @@ -1200,7 +1203,7 @@ int ar9170_set_channel(struct ar9170 *ar, struct ieee80211_channel *channel, return -ENOSYS; } - if (0 /* 2 streams capable */) + if (ar->eeprom.tx_mask != 1) tmp |= 0x100; err = ar9170_write_reg(ar, 0x1c5804, tmp); @@ -1214,7 +1217,7 @@ int ar9170_set_channel(struct ar9170 *ar, struct ieee80211_channel *channel, freqpar = ar9170_get_hw_dyn_params(channel, bw); vals[0] = cpu_to_le32(channel->center_freq * 1000); - vals[1] = cpu_to_le32(bw == AR9170_BW_20 ? 0 : 1); + vals[1] = cpu_to_le32(conf_is_ht40(&ar->hw->conf)); vals[2] = cpu_to_le32(offs << 2 | 1); vals[3] = cpu_to_le32(freqpar->coeff_exp); vals[4] = cpu_to_le32(freqpar->coeff_man); -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html