Update ath5k to use the ctl settings for tx power based on current
regulatory domain.
Signed-off-by: Bob Copeland <me@xxxxxxxxxxxxxxx>
Acked-by: Nick Kossifidis <mickflemm@xxxxxxxxx>
---
drivers/net/wireless/ath/ath5k/phy.c | 19 +++++++------------
1 files changed, 7 insertions(+), 12 deletions(-)
diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c
index 6737ba0..d0d1c35 100644
--- a/drivers/net/wireless/ath/ath5k/phy.c
+++ b/drivers/net/wireless/ath/ath5k/phy.c
@@ -2158,8 +2158,6 @@ done:
* Get the max edge power for this channel if
* we have such data from EEPROM's Conformance Test
* Limits (CTL), and limit max power if needed.
- *
- * FIXME: Only works for world regulatory domains
*/
static void
ath5k_get_max_ctl_power(struct ath5k_hw *ah,
@@ -2175,26 +2173,23 @@ ath5k_get_max_ctl_power(struct ath5k_hw *ah,
u8 ctl_idx = 0xFF;
u32 target = channel->center_freq;
- /* Find out a CTL for our mode that's not mapped
- * on a specific reg domain.
- *
- * TODO: Map our current reg domain to one of the 3 available
- * reg domain ids so that we can support more CTLs. */
+ ctl_mode = ath_regd_get_band_ctl(&ah->ah_regulatory, channel->band);
+
switch (channel->hw_value & CHANNEL_MODES) {
case CHANNEL_A:
- ctl_mode = AR5K_CTL_11A | AR5K_CTL_NO_REGDOMAIN;
+ ctl_mode |= AR5K_CTL_11A;
break;
case CHANNEL_G:
- ctl_mode = AR5K_CTL_11G | AR5K_CTL_NO_REGDOMAIN;
+ ctl_mode |= AR5K_CTL_11G;
break;
case CHANNEL_B:
- ctl_mode = AR5K_CTL_11B | AR5K_CTL_NO_REGDOMAIN;
+ ctl_mode |= AR5K_CTL_11B;
break;
case CHANNEL_T:
- ctl_mode = AR5K_CTL_TURBO | AR5K_CTL_NO_REGDOMAIN;
+ ctl_mode |= AR5K_CTL_TURBO;
break;
case CHANNEL_TG:
- ctl_mode = AR5K_CTL_TURBOG | AR5K_CTL_NO_REGDOMAIN;
+ ctl_mode |= AR5K_CTL_TURBOG;
break;
case CHANNEL_XR:
/* Fall through */
--
1.6.0.6
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
