Make PID check for IEEE80211_TX_CTL_NO_ACK instead of
is_multicast_ether_addr when determining whether to use the lowest
rate, and set the retry count to 0 (total try count = 1) if
IEEE80211_TX_CTL_NO_ACK is set.
Signed-off-by: Gábor Stefanik <netrolller.3d@xxxxxxxxx>
---
Patch also available as an attachment if Gmail linewraps it.
iwl-3945-rs.c | 7 ++++---
iwl-agn-rs.c | 14 +++++++-------
2 files changed, 11 insertions(+), 10 deletions(-)
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c
b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c
index f63a9c5..814afaf 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c
@@ -683,11 +683,10 @@ static void rs_get_rate(void *priv_r, struct
ieee80211_sta *sta,
if (sta)
rate_mask = sta->supp_rates[sband->band];
- /* Send management frames and broadcast/multicast data using lowest
- * rate. */
+ /* Send management frames and NO_ACK data using lowest rate. */
fc = le16_to_cpu(hdr->frame_control);
if ((fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA ||
- is_multicast_ether_addr(hdr->addr1) ||
+ info->flags & IEEE80211_TX_CTL_NO_ACK ||
!sta || !priv_sta) {
IWL_DEBUG_RATE(priv, "leave: No STA priv data to update!\n");
if (!rate_mask)
@@ -696,6 +695,8 @@ static void rs_get_rate(void *priv_r, struct
ieee80211_sta *sta,
else
info->control.rates[0].idx =
rate_lowest_index(sband, sta);
+ if (info->flags & IEEE80211_TX_CTL_NO_ACK)
+ info->control.rates[0].count = 1;
return;
}
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
index 98b6b37..c52652d 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
@@ -829,7 +829,7 @@ static void rs_tx_status(void *priv_r, struct
ieee80211_supported_band *sband,
IWL_DEBUG_RATE_LIMIT(priv, "get frame ack response, update rate
scale window\n");
if (!ieee80211_is_data(hdr->frame_control) ||
- is_multicast_ether_addr(hdr->addr1))
+ info->flags & IEEE80211_TX_CTL_NO_ACK)
return;
/* This packet was aggregated but doesn't carry rate scale info */
@@ -2005,11 +2005,10 @@ static void rs_rate_scale_perform(struct iwl_priv *priv,
IWL_DEBUG_RATE(priv, "rate scale calculate new rate for skb\n");
- /* Send management frames and broadcast/multicast data using
- * lowest rate. */
+ /* Send management frames and NO_ACK data using lowest rate. */
/* TODO: this could probably be improved.. */
if (!ieee80211_is_data(hdr->frame_control) ||
- is_multicast_ether_addr(hdr->addr1))
+ info->flags & IEEE80211_TX_CTL_NO_ACK)
return;
if (!sta || !lq_sta)
@@ -2456,16 +2455,17 @@ static void rs_get_rate(void *priv_r, struct
ieee80211_sta *sta, void *priv_sta,
if (sta)
mask_bit = sta->supp_rates[sband->band];
- /* Send management frames and broadcast/multicast data using lowest
- * rate. */
+ /* Send management frames and NO_ACK data using lowest rate. */
if (!ieee80211_is_data(hdr->frame_control) ||
- is_multicast_ether_addr(hdr->addr1) || !sta || !lq_sta) {
+ info->flags & IEEE80211_TX_CTL_NO_ACK || !sta || !lq_sta) {
if (!mask_bit)
info->control.rates[0].idx =
rate_lowest_index(sband, NULL);
else
info->control.rates[0].idx =
rate_lowest_index(sband, sta);
+ if (info->flags & IEEE80211_TX_CTL_NO_ACK)
+ info->control.rates[0].count = 1;
return;
}
iwl-3945-rs.c | 7 ++++---
iwl-agn-rs.c | 14 +++++++-------
2 files changed, 11 insertions(+), 10 deletions(-)
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c
index f63a9c5..814afaf 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c
@@ -683,11 +683,10 @@ static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta,
if (sta)
rate_mask = sta->supp_rates[sband->band];
- /* Send management frames and broadcast/multicast data using lowest
- * rate. */
+ /* Send management frames and NO_ACK data using lowest rate. */
fc = le16_to_cpu(hdr->frame_control);
if ((fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA ||
- is_multicast_ether_addr(hdr->addr1) ||
+ info->flags & IEEE80211_TX_CTL_NO_ACK ||
!sta || !priv_sta) {
IWL_DEBUG_RATE(priv, "leave: No STA priv data to update!\n");
if (!rate_mask)
@@ -696,6 +695,8 @@ static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta,
else
info->control.rates[0].idx =
rate_lowest_index(sband, sta);
+ if (info->flags & IEEE80211_TX_CTL_NO_ACK)
+ info->control.rates[0].count = 1;
return;
}
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
index 98b6b37..c52652d 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
@@ -829,7 +829,7 @@ static void rs_tx_status(void *priv_r, struct ieee80211_supported_band *sband,
IWL_DEBUG_RATE_LIMIT(priv, "get frame ack response, update rate scale window\n");
if (!ieee80211_is_data(hdr->frame_control) ||
- is_multicast_ether_addr(hdr->addr1))
+ info->flags & IEEE80211_TX_CTL_NO_ACK)
return;
/* This packet was aggregated but doesn't carry rate scale info */
@@ -2005,11 +2005,10 @@ static void rs_rate_scale_perform(struct iwl_priv *priv,
IWL_DEBUG_RATE(priv, "rate scale calculate new rate for skb\n");
- /* Send management frames and broadcast/multicast data using
- * lowest rate. */
+ /* Send management frames and NO_ACK data using lowest rate. */
/* TODO: this could probably be improved.. */
if (!ieee80211_is_data(hdr->frame_control) ||
- is_multicast_ether_addr(hdr->addr1))
+ info->flags & IEEE80211_TX_CTL_NO_ACK)
return;
if (!sta || !lq_sta)
@@ -2456,16 +2455,17 @@ static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta, void *priv_sta,
if (sta)
mask_bit = sta->supp_rates[sband->band];
- /* Send management frames and broadcast/multicast data using lowest
- * rate. */
+ /* Send management frames and NO_ACK data using lowest rate. */
if (!ieee80211_is_data(hdr->frame_control) ||
- is_multicast_ether_addr(hdr->addr1) || !sta || !lq_sta) {
+ info->flags & IEEE80211_TX_CTL_NO_ACK || !sta || !lq_sta) {
if (!mask_bit)
info->control.rates[0].idx =
rate_lowest_index(sband, NULL);
else
info->control.rates[0].idx =
rate_lowest_index(sband, sta);
+ if (info->flags & IEEE80211_TX_CTL_NO_ACK)
+ info->control.rates[0].count = 1;
return;
}
