On Sat, Apr 11, 2009 at 11:35 AM, Larry Finger <Larry.Finger@xxxxxxxxxxxx> wrote: > David Ellingsworth wrote: >> I wanted to report that I've finally been successful at getting >> b43legacy to beacon properly. Originally, I had configured hostapd to >> use channel 1. After reading the list of bugs for the bwi driver, >> shown here: http://leaf.dragonflybsd.org/cgi/web-man?command=bwi , I >> had the inclination to try channel 6. It appears b43legacy might have >> the same bugs as the bwi driver as I immediately began seeing beacons >> once I started using channel 6. > > I just tested and my 4311/1 running b43legacy sends beacons on channel 1. The > problem is likely in the initialization of the 4306 units. That is something I > will be investigating. > > As far as I can tell, it should be OK to submit the b43legacy beacon patches. > Agreed, they have my ACK. Regards, David Ellingsworth -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
