Search Linux Wireless

Re: ath9k becon loss messages

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Helmut Schaa <helmut.schaa@xxxxxxxxxxxxxx> writes:

>> Then there is something happening in ath9k or your AP which prevents
>> ath9k from receiving beacons. Try pinging your AP with 100 ms
>> interval. Do you see anything happening in 120 s intervals?
>
> NetworkManager typically scans every 120 seconds and I can also trigger
> the messages by a manual scan with iwlist. I did not dig any further but
> the messages seem to appear right at the end of the scan. Tried with iwlagn
> and both sw_scan and hw_scan.

Thanks, this was valuable info. It might be that my beacon filtering
patches broke something related to scanning and beacon loss check. I'll
take a look at this.

-- 
Kalle Valo
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]
  Powered by Linux