On Sun, 29 Mar 2009 16:53:04 +0200 Christian Lamparter <chunkeey@xxxxxx> wrote: > On Sunday 29 March 2009 09:42:37 Mark A. Haun wrote: > > p54pci 0000:0a:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > > p54pci 0000:0a:00.0: firmware: requesting isl3886pci > > phy0: p54 detected a LM86 firmware > > p54: rx_mtu reduced from 3240 to 2376 > > phy0: FW rev 2.13.12.0 - Softmac protocol 5.9 > > phy0: cryptographic accelerator WEP:YES, TKIP:YES, CCMP:YES > > phy0: device does not respond! > > p54pci 0000:0a:00.0: PCI INT A disabled > > p54pci: probe of 0000:0a:00.0 failed with error -16 > > [...] > Well, there was one report a while ago: > http://markmail.org/message/fotvzl5ldlgfwxbo > (I bet you've read it already) This looks like a rev 2 card whereas mine is rev 1 (if PCI IDs are to be trusted). > Of course you can give ndiswrapper with the windows driver a try. > Let me know if it works or produces the same "-16" error. I just tried this, but I forgot it can't work because I am running x86_64 architecture and SMC hasn't released 64-bit drivers :( Mark -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
