Am Montag, den 23.03.2009, 16:10 -0700 schrieb Luis R. Rodriguez: > On Mon, Mar 23, 2009 at 4:04 PM, Martin Capitanio <martin@xxxxxxxxxxxxx> wrote: > > Setting the EU or DE regulatory domain (cfg80211 ieee80211_regdom=EU) > > seems to be working, but afterwards inserting the rtl8187 driver causes crash: > > Please try with today's wireless-testing a set of fixes went in to Sure, I tried "DE" with the same result as well. Fortunately, wireless-testing doesn't crash during the rtl8187 driver load anymore, but changing the regulatory domain seems to be no-op (see below). Furthermore the current wireless-testing breaks the rtl8187 driver completely. If I try to connect to an AP (with or without changing the domain), it hard-freezes the kernel without any log entry. > address a bug with "EU". Mind you, "EU" is an invalid ISO3166-alpha2 > so you may want to consider start using your own valid country alpha2 > code. If you use "EU" now you'll world roam. I wonder why is there than the EU (confusing) code at all? Actually I would expect a "smallest common intersection" of the 27 European Union member states. Martin ---- 2.6.29-rc8-wl at commit 8fe80c672051978895d0c3ef7be1dc7bcaa8621e [ 14.724111] cfg80211: Using static regulatory domain info [ 14.724154] cfg80211: Regulatory domain: US [ 14.724186] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 14.724233] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) [ 14.724267] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 14.724300] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 14.724334] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 14.724367] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 14.724402] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) [ 14.724453] cfg80211: Calling CRDA for country: US [ 14.731855] usbcore: registered new interface driver hiddev [ 14.734528] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input6 [ 14.744220] generic-usb 0003:046D:C526.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1/input0 [ 14.749224] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.1/input/input7 [ 14.760185] generic-usb 0003:046D:C526.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1/input1 [ 14.761508] usbcore: registered new interface driver usbhid [ 14.762406] usbhid: v2.6:USB HID core driver [ 14.785424] uvcvideo: Found UVC 1.00 device CNF7051 (04f2:b070) [ 14.787514] input: CNF7051 as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input8 [ 14.795375] Bluetooth: Generic Bluetooth USB driver ver 0.4 [ 14.795520] usbcore: registered new interface driver btusb [ 14.874378] usbcore: registered new interface driver uvcvideo [ 14.874417] USB Video Class driver (v0.1.0) [ 15.384073] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x9280b1, caps: 0xa04711/0xa04000 [ 15.406636] rtl8187: 8187B chip detected. [ 15.407152] phy0: Selected rate control algorithm 'minstrel' modprobe -r rtl8187 modprobe -r cfg80211 modprobe cfg80211 ieee80211_regdom=DE [ 570.676064] usbcore: deregistering interface driver rtl8187 [ 570.944071] usb 2-6: reset high speed USB device using ehci_hcd and address 4 [ 687.552176] cfg80211: Using static regulatory domain info [ 687.552182] cfg80211: Regulatory domain: US [ 687.552186] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 687.552191] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) [ 687.552196] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 687.552201] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 687.552206] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 687.552210] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 687.552215] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) [ 687.552501] cfg80211: Calling CRDA for country: DE modprobe rtl8187 [ 731.873109] rtl8187: 8187B chip detected. [ 731.877283] phy0: Selected rate control algorithm 'minstrel' [ 731.877990] phy0: hwaddr , RTL8187BvE V0 + rtl8225z2 [ 731.878047] usbcore: registered new interface driver rtl8187 iw reg get country US: (2402 - 2472 @ 40), (6, 27) (5170 - 5190 @ 40), (6, 23) (5190 - 5210 @ 40), (6, 23) (5210 - 5230 @ 40), (6, 23) (5230 - 5330 @ 40), (6, 23) (5735 - 5835 @ 40), (6, 30) iw reg set DE iw reg get country US: (2402 - 2472 @ 40), (6, 27) (5170 - 5190 @ 40), (6, 23) (5190 - 5210 @ 40), (6, 23) (5210 - 5230 @ 40), (6, 23) (5230 - 5330 @ 40), (6, 23) (5735 - 5835 @ 40), (6, 30) iw list Wiphy phy0 Band 1: Frequencies: * 2412 MHz [1] (27.0 dBm) * 2417 MHz [2] (27.0 dBm) * 2422 MHz [3] (27.0 dBm) * 2427 MHz [4] (27.0 dBm) * 2432 MHz [5] (27.0 dBm) * 2437 MHz [6] (27.0 dBm) * 2442 MHz [7] (27.0 dBm) * 2447 MHz [8] (27.0 dBm) * 2452 MHz [9] (27.0 dBm) * 2457 MHz [10] (27.0 dBm) * 2462 MHz [11] (27.0 dBm) * 2467 MHz [12] (disabled) * 2472 MHz [13] (disabled) * 2484 MHz [14] (disabled) Bitrates: * 1.0 Mbps * 2.0 Mbps * 5.5 Mbps * 11.0 Mbps * 6.0 Mbps * 9.0 Mbps * 12.0 Mbps * 18.0 Mbps * 24.0 Mbps * 36.0 Mbps * 48.0 Mbps * 54.0 Mbps max # scan SSIDs: 4 Supported interface modes: * Station * Monitor -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
