This patch updates p54's Kconfig entry and removes the out-dated device list. Signed-off-by: Christian Lamparter <chunkeey@xxxxxx> --- John, This patch goes on top of "[PATCH v2] p54: fix SoftLED compile dependencies". Regards, Chr --- diff --git a/drivers/net/wireless/p54/Kconfig b/drivers/net/wireless/p54/Kconfig index 0e344ac..ee1aaca 100644 --- a/drivers/net/wireless/p54/Kconfig +++ b/drivers/net/wireless/p54/Kconfig @@ -1,9 +1,10 @@ config P54_COMMON tristate "Softmac Prism54 support" - depends on MAC80211 && WLAN_80211 && FW_LOADER && EXPERIMENTAL + depends on MAC80211 && WLAN_80211 && EXPERIMENTAL + select FW_LOADER ---help--- - This is common code for isl38xx based cards. - This module does nothing by itself - the USB/PCI frontends + This is common code for isl38xx/stlc45xx based modules. + This module does nothing by itself - the USB/PCI/SPI front-ends also need to be enabled in order to support any devices. These devices require softmac firmware which can be found at @@ -17,31 +18,6 @@ config P54_USB select CRC32 ---help--- This driver is for USB isl38xx based wireless cards. - These are USB based adapters found in devices such as: - - 3COM 3CRWE254G72 - SMC 2862W-G - Accton 802.11g WN4501 USB - Siemens Gigaset USB - Netgear WG121 - Netgear WG111 - Medion 40900, Roper Europe - Shuttle PN15, Airvast WM168g, IOGear GWU513 - Linksys WUSB54G - Linksys WUSB54G Portable - DLink DWL-G120 Spinnaker - DLink DWL-G122 - Belkin F5D7050 ver 1000 - Cohiba Proto board - SMC 2862W-G version 2 - U.S. Robotics U5 802.11g Adapter - FUJITSU E-5400 USB D1700 - Sagem XG703A - DLink DWL-G120 Cohiba - Spinnaker Proto board - Linksys WUSB54AG - Inventel UR054G - Spinnaker DUT These devices require softmac firmware which can be found at http://prism54.org/ -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
