Search Linux Wireless

Re: [PATCH] p54: fix SoftLED compile dependencies

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Christian Lamparter wrote:
> This patch fixes a compile problem when the MAC80211_LEDS
> triggers are enabled but not LED class itself. 
> (which is sort of pointless, but anyway...)
> 
> Signed-off-by: Christian Lamparter <chunkeey@xxxxxx>
> ---
> mb, thank you for the tips!
> 
> Randy Dunlap can you please give this patch a try?

Acked-by: Randy Dunlap <randy.dunlap@xxxxxxxxxx>

Thanks.

> John, do you know where the patch form 
> Geert Uytterhoeven <geert@xxxxxxxxxxxxxx> went?
> ---
> diff --git a/drivers/net/wireless/p54/Kconfig b/drivers/net/wireless/p54/Kconfig
> index 0e344ac..ee1aaca 100644
> --- a/drivers/net/wireless/p54/Kconfig
> +++ b/drivers/net/wireless/p54/Kconfig
> @@ -1,9 +1,10 @@
>  config P54_COMMON
>  	tristate "Softmac Prism54 support"
> -	depends on MAC80211 && WLAN_80211 && FW_LOADER && EXPERIMENTAL
> +	depends on MAC80211 && WLAN_80211 && EXPERIMENTAL
> +	select FW_LOADER
>  	---help---
> -	  This is common code for isl38xx based cards.
> -	  This module does nothing by itself - the USB/PCI frontends
> +	  This is common code for isl38xx/stlc45xx based modules.
> +	  This module does nothing by itself - the USB/PCI/SPI frontends
>  	  also need to be enabled in order to support any devices.
>  
>  	  These devices require softmac firmware which can be found at
> @@ -17,31 +18,6 @@ config P54_USB
>  	select CRC32
>  	---help---
>  	  This driver is for USB isl38xx based wireless cards.
> -	  These are USB based adapters found in devices such as:
> -
> -	  3COM 3CRWE254G72
> -	  SMC 2862W-G
> -	  Accton 802.11g WN4501 USB
> -	  Siemens Gigaset USB
> -	  Netgear WG121
> -	  Netgear WG111
> -	  Medion 40900, Roper Europe
> -	  Shuttle PN15, Airvast WM168g, IOGear GWU513
> -	  Linksys WUSB54G
> -	  Linksys WUSB54G Portable
> -	  DLink DWL-G120 Spinnaker
> -	  DLink DWL-G122
> -	  Belkin F5D7050 ver 1000
> -	  Cohiba Proto board
> -	  SMC 2862W-G version 2
> -	  U.S. Robotics U5 802.11g Adapter
> -	  FUJITSU E-5400 USB D1700
> -	  Sagem XG703A
> -	  DLink DWL-G120 Cohiba
> -	  Spinnaker Proto board
> -	  Linksys WUSB54AG
> -	  Inventel UR054G
> -	  Spinnaker DUT
>  
>  	  These devices require softmac firmware which can be found at
>  	  http://prism54.org/
> @@ -71,3 +47,8 @@ config P54_SPI
>  	  Nokia's N800/N810 Portable Internet Tablet.
>  
>  	  If you choose to build a module, it'll be called p54spi.
> +
> +config P54_LEDS
> +	bool
> +	depends on P54_COMMON && MAC80211_LEDS && (LEDS_CLASS = y || LEDS_CLASS = P54_COMMON)
> +	default y
> diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c
> index 0a98983..0c1b057 100644
> --- a/drivers/net/wireless/p54/p54common.c
> +++ b/drivers/net/wireless/p54/p54common.c
> @@ -21,9 +21,9 @@
>  #include <linux/etherdevice.h>
>  
>  #include <net/mac80211.h>
> -#ifdef CONFIG_MAC80211_LEDS
> +#ifdef CONFIG_P54_LEDS
>  #include <linux/leds.h>
> -#endif /* CONFIG_MAC80211_LEDS */
> +#endif /* CONFIG_P54_LEDS */
>  
>  #include "p54.h"
>  #include "p54common.h"
> @@ -2420,7 +2420,7 @@ static int p54_set_key(struct ieee80211_hw *dev, enum set_key_cmd cmd,
>  	return 0;
>  }
>  
> -#ifdef CONFIG_MAC80211_LEDS
> +#ifdef CONFIG_P54_LEDS
>  static void p54_led_brightness_set(struct led_classdev *led_dev,
>  				   enum led_brightness brightness)
>  {
> @@ -2508,7 +2508,7 @@ static void p54_unregister_leds(struct ieee80211_hw *dev)
>  	if (priv->assoc_led.registered)
>  		led_classdev_unregister(&priv->assoc_led.led_dev);
>  }
> -#endif /* CONFIG_MAC80211_LEDS */
> +#endif /* CONFIG_P54_LEDS */
>  
>  static const struct ieee80211_ops p54_ops = {
>  	.tx			= p54_tx,
> @@ -2592,11 +2592,11 @@ int p54_register_common(struct ieee80211_hw *dev, struct device *pdev)
>  		return err;
>  	}
>  
> -	#ifdef CONFIG_MAC80211_LEDS
> +#ifdef CONFIG_P54_LEDS
>  	err = p54_init_leds(dev);
>  	if (err)
>  		return err;
> -	#endif /* CONFIG_MAC80211_LEDS */
> +#endif /* CONFIG_P54_LEDS */
>  
>  	dev_info(pdev, "is registered as '%s'\n", wiphy_name(dev->wiphy));
>  	return 0;
> @@ -2610,9 +2610,9 @@ void p54_free_common(struct ieee80211_hw *dev)
>  	kfree(priv->output_limit);
>  	kfree(priv->curve_data);
>  
> -	#ifdef CONFIG_MAC80211_LEDS
> +#ifdef CONFIG_P54_LEDS
>  	p54_unregister_leds(dev);
> -	#endif /* CONFIG_MAC80211_LEDS */
> +#endif /* CONFIG_P54_LEDS */
>  }
>  EXPORT_SYMBOL_GPL(p54_free_common);
>  


-- 
~Randy
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]
  Powered by Linux