When software scanning we need to disable power save so that all possible
probe responses and beacons are received. For hardware scanning assume that
hardware will take care of that and document that assumption.
Signed-off-by: Kalle Valo <kalle.valo@xxxxxxxxx>
---
include/net/mac80211.h | 12 ++++++-----
net/mac80211/scan.c | 54 ++++++++++++++++++++++++++++++++++++++++++++++--
2 files changed, 59 insertions(+), 7 deletions(-)
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 12a52ef..9ef131d 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -1318,11 +1318,13 @@ enum ieee80211_ampdu_mlme_action {
*
* @hw_scan: Ask the hardware to service the scan request, no need to start
* the scan state machine in stack. The scan must honour the channel
- * configuration done by the regulatory agent in the wiphy's registered
- * bands. When the scan finishes, ieee80211_scan_completed() must be
- * called; note that it also must be called when the scan cannot finish
- * because the hardware is turned off! Anything else is a bug!
- * Returns a negative error code which will be seen in userspace.
+ * configuration done by the regulatory agent in the wiphy's
+ * registered bands. The hardware (or the driver) needs to make sure
+ * that power save is disabled. When the scan finishes,
+ * ieee80211_scan_completed() must be called; note that it also must
+ * be called when the scan cannot finish because the hardware is
+ * turned off! Anything else is a bug! Returns a negative error code
+ * which will be seen in userspace.
*
* @sw_scan_start: Notifier function that is called just before a software scan
* is started. Can be NULL, if the driver doesn't need this notification.
diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c
index 0e81e16..dec7d5a 100644
--- a/net/mac80211/scan.c
+++ b/net/mac80211/scan.c
@@ -202,6 +202,56 @@ ieee80211_scan_rx(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb,
return RX_QUEUED;
}
+/*
+ * inform AP that we will go to sleep so that it will buffer the frames
+ * while we scan
+ */
+static void ieee80211_scan_ps_enable(struct ieee80211_sub_if_data *sdata)
+{
+ struct ieee80211_local *local = sdata->local;
+ bool ps = false;
+
+ /* FIXME: what to do when local->pspolling is true? */
+
+ del_timer_sync(&local->dynamic_ps_timer);
+ cancel_work_sync(&local->dynamic_ps_enable_work);
+
+ if (local->hw.conf.flags & IEEE80211_CONF_PS) {
+ ps = true;
+ local->hw.conf.flags &= ~IEEE80211_CONF_PS;
+ ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
+ }
+
+ if (!ps || (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK))
+ /*
+ * with IEEE80211_HW_PS_NULLFUNC_STACK and power save
+ * enabled the firmware sent a null frame when power save
+ * was disabled, so we need to send a new null frame
+ */
+ ieee80211_send_nullfunc(local, sdata, 1);
+}
+
+/* inform AP that we are awake again, unless power save is enabled */
+static void ieee80211_scan_ps_disable(struct ieee80211_sub_if_data *sdata)
+{
+ struct ieee80211_local *local = sdata->local;
+
+ if (!local->powersave)
+ ieee80211_send_nullfunc(local, sdata, 0);
+ else {
+ /*
+ * In IEEE80211_HW_PS_NULLFUNC_STACK case firmware will
+ * send a null frame with powersave bit set again even
+ * though the AP already knows that we are sleeping. This
+ * could be avoided by sending a null frame with power save
+ * bit disabled before enabling the power save but it
+ * doesn't gain anything.
+ */
+ local->hw.conf.flags |= IEEE80211_CONF_PS;
+ ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
+ }
+}
+
void ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted)
{
struct ieee80211_local *local = hw_to_local(hw);
@@ -256,7 +306,7 @@ void ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted)
/* Tell AP we're back */
if (sdata->vif.type == NL80211_IFTYPE_STATION) {
if (sdata->u.mgd.flags & IEEE80211_STA_ASSOCIATED) {
- ieee80211_send_nullfunc(local, sdata, 0);
+ ieee80211_scan_ps_disable(sdata);
netif_tx_wake_all_queues(sdata->dev);
}
} else
@@ -416,7 +466,7 @@ int ieee80211_start_scan(struct ieee80211_sub_if_data *scan_sdata,
if (sdata->vif.type == NL80211_IFTYPE_STATION) {
if (sdata->u.mgd.flags & IEEE80211_STA_ASSOCIATED) {
netif_tx_stop_all_queues(sdata->dev);
- ieee80211_send_nullfunc(local, sdata, 1);
+ ieee80211_scan_ps_enable(sdata);
}
} else
netif_tx_stop_all_queues(sdata->dev);
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
