Jason Andryuk noticed that at76_usb won't compile with current
wireless-testing tree. This is because net/ieee80211.h was missing.
net/ieee80211.h will be removed soon and at76_usb won't compile then that
happens. Preprare for that by using instead linux/ieee80211.h and copying
some structures not available.
Signed-off-by: Kalle Valo <kalle.valo@xxxxxx>
---
drivers/staging/at76_usb/at76_usb.c | 18 ++++---
drivers/staging/at76_usb/at76_usb.h | 87 +++++++++++++++++++++++++++++++++++
2 files changed, 96 insertions(+), 9 deletions(-)
diff --git a/drivers/staging/at76_usb/at76_usb.c b/drivers/staging/at76_usb/at76_usb.c
index c8e4d31..1d8eaf8 100644
--- a/drivers/staging/at76_usb/at76_usb.c
+++ b/drivers/staging/at76_usb/at76_usb.c
@@ -36,7 +36,7 @@
#include <net/ieee80211_radiotap.h>
#include <linux/firmware.h>
#include <linux/leds.h>
-#include <net/ieee80211.h>
+#include <linux/ieee80211.h>
#include "at76_usb.h"
@@ -1727,12 +1727,12 @@ static int at76_assoc_req(struct at76_priv *priv, struct bss_info *bss)
/* write TLV data elements */
- ie->id = MFIE_TYPE_SSID;
+ ie->id = WLAN_EID_SSID;
ie->len = bss->ssid_len;
memcpy(ie->data, bss->ssid, bss->ssid_len);
next_ie(&ie);
- ie->id = MFIE_TYPE_RATES;
+ ie->id = WLAN_EID_SUPP_RATES;
ie->len = sizeof(hw_rates);
memcpy(ie->data, hw_rates, sizeof(hw_rates));
next_ie(&ie); /* ie points behind the supp_rates field */
@@ -4397,7 +4397,7 @@ static void at76_rx_mgmt_beacon(struct at76_priv *priv,
switch (ie->id) {
- case MFIE_TYPE_SSID:
+ case WLAN_EID_SSID:
if (have_ssid)
break;
@@ -4420,7 +4420,7 @@ static void at76_rx_mgmt_beacon(struct at76_priv *priv,
have_ssid = 1;
break;
- case MFIE_TYPE_RATES:
+ case WLAN_EID_SUPP_RATES:
if (have_rates)
break;
@@ -4433,7 +4433,7 @@ static void at76_rx_mgmt_beacon(struct at76_priv *priv,
hex2str(ie->data, ie->len));
break;
- case MFIE_TYPE_DS_SET:
+ case WLAN_EID_DS_PARAMS:
if (have_channel)
break;
@@ -4443,9 +4443,9 @@ static void at76_rx_mgmt_beacon(struct at76_priv *priv,
priv->netdev->name, match->channel);
break;
- case MFIE_TYPE_CF_SET:
- case MFIE_TYPE_TIM:
- case MFIE_TYPE_IBSS_SET:
+ case WLAN_EID_CF_PARAMS:
+ case WLAN_EID_TIM:
+ case WLAN_EID_IBSS_PARAMS:
default:
at76_dbg(DBG_RX_BEACON, "%s: beacon IE id %d len %d %s",
priv->netdev->name, ie->id, ie->len,
diff --git a/drivers/staging/at76_usb/at76_usb.h b/drivers/staging/at76_usb/at76_usb.h
index b20be9d..6d60c6e 100644
--- a/drivers/staging/at76_usb/at76_usb.h
+++ b/drivers/staging/at76_usb/at76_usb.h
@@ -22,6 +22,93 @@
#ifndef _AT76_USB_H
#define _AT76_USB_H
+/*
+ * ieee80211 definitions copied from net/ieee80211.h
+ */
+
+#define WEP_KEY_LEN 13
+#define WEP_KEYS 4
+
+#define IEEE80211_DATA_LEN 2304
+/* Maximum size for the MA-UNITDATA primitive, 802.11 standard section
+ 6.2.1.1.2.
+
+ The figure in section 7.1.2 suggests a body size of up to 2312
+ bytes is allowed, which is a bit confusing, I suspect this
+ represents the 2304 bytes of real data, plus a possible 8 bytes of
+ WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro) */
+
+#define IEEE80211_1ADDR_LEN 10
+#define IEEE80211_2ADDR_LEN 16
+#define IEEE80211_3ADDR_LEN 24
+#define IEEE80211_4ADDR_LEN 30
+#define IEEE80211_FCS_LEN 4
+#define IEEE80211_HLEN (IEEE80211_4ADDR_LEN)
+#define IEEE80211_FRAME_LEN (IEEE80211_DATA_LEN + IEEE80211_HLEN)
+
+#define MIN_FRAG_THRESHOLD 256U
+#define MAX_FRAG_THRESHOLD 2346U
+
+struct ieee80211_info_element {
+ u8 id;
+ u8 len;
+ u8 data[0];
+} __attribute__ ((packed));
+
+struct ieee80211_hdr_3addr {
+ __le16 frame_ctl;
+ __le16 duration_id;
+ u8 addr1[ETH_ALEN];
+ u8 addr2[ETH_ALEN];
+ u8 addr3[ETH_ALEN];
+ __le16 seq_ctl;
+ u8 payload[0];
+} __attribute__ ((packed));
+
+struct ieee80211_auth {
+ struct ieee80211_hdr_3addr header;
+ __le16 algorithm;
+ __le16 transaction;
+ __le16 status;
+ /* challenge */
+ struct ieee80211_info_element info_element[0];
+} __attribute__ ((packed));
+
+struct ieee80211_assoc_request {
+ struct ieee80211_hdr_3addr header;
+ __le16 capability;
+ __le16 listen_interval;
+ /* SSID, supported rates, RSN */
+ struct ieee80211_info_element info_element[0];
+} __attribute__ ((packed));
+
+struct ieee80211_probe_response {
+ struct ieee80211_hdr_3addr header;
+ __le32 time_stamp[2];
+ __le16 beacon_interval;
+ __le16 capability;
+ /* SSID, supported rates, FH params, DS params,
+ * CF params, IBSS params, TIM (if beacon), RSN */
+ struct ieee80211_info_element info_element[0];
+} __attribute__ ((packed));
+
+/* Alias beacon for probe_response */
+#define ieee80211_beacon ieee80211_probe_response
+
+struct ieee80211_assoc_response {
+ struct ieee80211_hdr_3addr header;
+ __le16 capability;
+ __le16 status;
+ __le16 aid;
+ /* supported rates */
+ struct ieee80211_info_element info_element[0];
+} __attribute__ ((packed));
+
+struct ieee80211_disassoc {
+ struct ieee80211_hdr_3addr header;
+ __le16 reason;
+} __attribute__ ((packed));
+
/* Board types */
enum board_type {
BOARD_503_ISL3861 = 1,
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
