AR9285 chipsets have a different EEPROM layout, handle this appropriately when populating the rd_ext capability. Signed-off-by: Sujith <Sujith.Manoharan@xxxxxxxxxxx> --- drivers/net/wireless/ath9k/eeprom.h | 12 ++++++++++++ drivers/net/wireless/ath9k/hw.c | 3 ++- 2 files changed, 14 insertions(+), 1 deletions(-) diff --git a/drivers/net/wireless/ath9k/eeprom.h b/drivers/net/wireless/ath9k/eeprom.h index b7c656c..5c0d6c3 100644 --- a/drivers/net/wireless/ath9k/eeprom.h +++ b/drivers/net/wireless/ath9k/eeprom.h @@ -78,6 +78,18 @@ #define INCREASE_MAXPOW_BY_TWO_CHAIN 6 /* 10*log10(2)*2 */ #define INCREASE_MAXPOW_BY_THREE_CHAIN 10 /* 10*log10(3)*2 */ +/* + * For AR9285 and later chipsets, the following bits are not being programmed + * in EEPROM and so need to be enabled always. + * + * Bit 0: en_fcc_mid + * Bit 1: en_jap_mid + * Bit 2: en_fcc_dfs_ht40 + * Bit 3: en_jap_ht40 + * Bit 4: en_jap_dfs_ht40 + */ +#define AR9285_RDEXT_DEFAULT 0x1F + #define AR_EEPROM_MAC(i) (0x1d+(i)) #define ATH9K_POW_SM(_r, _s) (((_r) & 0x3f) << (_s)) #define FREQ2FBIN(x, y) ((y) ? ((x) - 2300) : (((x) - 4800) / 5)) diff --git a/drivers/net/wireless/ath9k/hw.c b/drivers/net/wireless/ath9k/hw.c index cad8e39..55d5a74 100644 --- a/drivers/net/wireless/ath9k/hw.c +++ b/drivers/net/wireless/ath9k/hw.c @@ -3128,10 +3128,11 @@ bool ath9k_hw_fill_cap_info(struct ath_hw *ah) u16 capField = 0, eeval; eeval = ah->eep_ops->get_eeprom(ah, EEP_REG_0); - ah->regulatory.current_rd = eeval; eeval = ah->eep_ops->get_eeprom(ah, EEP_REG_1); + if (AR_SREV_9285_10_OR_LATER(ah)) + eeval |= AR9285_RDEXT_DEFAULT; ah->regulatory.current_rd_ext = eeval; capField = ah->eep_ops->get_eeprom(ah, EEP_OP_CAP); -- 1.6.1 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
