On Fri, Feb 6, 2009 at 3:47 PM, Bryan Wu <cooloney@xxxxxxxxxx> wrote:
> On Thu, Feb 5, 2009 at 11:03 PM, Dan Williams <dcbw@xxxxxxxxxx> wrote:
>> On Thu, 2009-02-05 at 15:30 +0800, Bryan Wu wrote:
>>> From: Cliff Cai <cliff.cai@xxxxxxxxxx>
>>>
>>> Introduce POWEROF2_BLOCKSIZE_ONLY option for those SD/SDIO host
>>> which only support transferring block with size of power-of-2
>>
>> Is the point here to avoid copying in the controller code? As with the
>> other patches on libertas-dev, I really dislike adding code to *every
>> SDIO driver* just because the host has certain restrictions. I'd much
>> rather that the host/controller code became aware of it's own
>> restrictions, and exposed those generically to drivers above it.
>> Without a KConfig option.
>>
>> Seriously. The host knows what it needs. The code to handle that
>> should go in the host.
>>
>
> I agree here.
>
>> How about adding a method like "sdio_align_size" that takes the
>> controller's constraints into account? That seems a lot cleaner than
>> adding #define/KConfig junk to every SDIO driver in the kernel. One
>> less codepath to test, makes your life and all our lives easier.
>>
>
> So we plan to add method ".sdio_align_size" to SDIO stack.
> And Blackfin host driver will implement this method while others will
> implement this as a dummy function.
>
sdio_align_size is already in SDIO stack, so we just need to add our
constraints to this function.
Thanks
-Bryan
>
>>> [ Bryan Wu <cooloney@xxxxxxxxxx>:
>>> - remove some useless coding style cleanup
>>> - using roundup() function as upstream does
>>> ]
>>>
>>> Signed-off-by: Cliff Cai <cliff.cai@xxxxxxxxxx>
>>> Signed-off-by: Bryan Wu <cooloney@xxxxxxxxxx>
>>> ---
>>> drivers/net/wireless/Kconfig | 6 ++++++
>>> drivers/net/wireless/libertas/if_sdio.c | 16 ++++++++++++++++
>>> 2 files changed, 22 insertions(+), 0 deletions(-)
>>>
>>> diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
>>> index e4f9f74..a2685fa 100644
>>> --- a/drivers/net/wireless/Kconfig
>>> +++ b/drivers/net/wireless/Kconfig
>>> @@ -151,6 +151,12 @@ config LIBERTAS_SDIO
>>> ---help---
>>> A driver for Marvell Libertas 8385 and 8686 SDIO devices.
>>>
>>> +config POWEROF2_BLOCKSIZE_ONLY
>>> + bool "Support transferring block with size of power-of-2 only"
>>> + depends on LIBERTAS_SDIO
>>> + ---help---
>>> + For SD/SDIO host which only supports transferring block with size of power-of-2.
>>> +
>>> config LIBERTAS_DEBUG
>>> bool "Enable full debugging output in the Libertas module."
>>> depends on LIBERTAS
>>> diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c
>>> index 4519d73..5efc056 100644
>>> --- a/drivers/net/wireless/libertas/if_sdio.c
>>> +++ b/drivers/net/wireless/libertas/if_sdio.c
>>> @@ -272,6 +272,11 @@ static int if_sdio_card_to_host(struct if_sdio_card *card)
>>> */
>>> chunk = sdio_align_size(card->func, size);
>>>
>>> +/* For SD/SDIO host which only supports transferring block with size of power-of-2 */
>>> +#if defined(CONFIG_POWEROF2_BLOCKSIZE_ONLY)
>>> + chunk = (chunk + card->func->cur_blksize - 1) /
>>> + card->func->cur_blksize * card->func->cur_blksize;
>>> +#endif
>>> ret = sdio_readsb(card->func, card->buffer, card->ioport, chunk);
>>> if (ret)
>>> goto out;
>>> @@ -581,8 +586,14 @@ static int if_sdio_prog_real(struct if_sdio_card *card)
>>> lbs_deb_sdio("sending %d bytes (%d bytes) chunk\n",
>>> chunk_size, (chunk_size + 31) / 32 * 32);
>>> */
>>> +/* For SD/SDIO host which only supports transferring block with size of power-of-2 */
>>> +#if defined(CONFIG_POWEROF2_BLOCKSIZE_ONLY)
>>> + ret = sdio_writesb(card->func, card->ioport,
>>> + chunk_buffer, roundup(chunk_size, 256);
>>> +#else
>>> ret = sdio_writesb(card->func, card->ioport,
>>> chunk_buffer, roundup(chunk_size, 32));
>>> +#endif
>>> if (ret)
>>> goto release;
>>>
>>> @@ -699,6 +710,11 @@ static int if_sdio_host_to_card(struct lbs_private *priv,
>>> */
>>> size = sdio_align_size(card->func, nb + 4);
>>>
>>> +/* For SD/SDIO host which only supports transferring block with size of power-of-2 */
>>> +#if defined(CONFIG_POWEROF2_BLOCKSIZE_ONLY)
>>> + size = (size + card->func->cur_blksize - 1) /
>>> + card->func->cur_blksize * card->func->cur_blksize;
>>> +#endif
>>> packet = kzalloc(sizeof(struct if_sdio_packet) + size,
>>> GFP_ATOMIC);
>>> if (!packet) {
>>
>>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
