A few bugs were fixed in the LP baseband init specs.
Signed-off-by: Michael Buesch <mb@xxxxxxxxx>
---
Please queue on top of the other LP-PHY patches.
Index: wireless-testing/drivers/net/wireless/b43/phy_lp.c
===================================================================
--- wireless-testing.orig/drivers/net/wireless/b43/phy_lp.c 2009-02-03 19:30:33.000000000 +0100
+++ wireless-testing/drivers/net/wireless/b43/phy_lp.c 2009-02-03 19:33:18.000000000 +0100
@@ -70,6 +70,7 @@ static void lpphy_baseband_rev0_1_init(s
static void lpphy_baseband_rev2plus_init(struct b43_wldev *dev)
{
+ struct ssb_bus *bus = dev->dev->bus;
struct b43_phy_lp *lpphy = dev->phy.lp;
b43_phy_write(dev, B43_LPPHY_AFE_DAC_CTL, 0x50);
@@ -89,7 +90,7 @@ static void lpphy_baseband_rev2plus_init
b43_phy_mask(dev, B43_LPPHY_CRSGAIN_CTL, ~0x4000);
b43_phy_mask(dev, B43_LPPHY_CRSGAIN_CTL, ~0x2000);
b43_phy_set(dev, B43_PHY_OFDM(0x10A), 0x1);
- b43_phy_maskset(dev, B43_LPPHY_CCKLMSSTEPSIZE, 0xFF01, 0x10);
+ b43_phy_maskset(dev, B43_PHY_OFDM(0x10A), 0xFF01, 0x10);
b43_phy_maskset(dev, B43_PHY_OFDM(0xDF), 0xFF00, 0xF4);
b43_phy_maskset(dev, B43_PHY_OFDM(0xDF), 0x00FF, 0xF100);
b43_phy_write(dev, B43_LPPHY_CLIPTHRESH, 0x48);
@@ -101,8 +102,13 @@ static void lpphy_baseband_rev2plus_init
b43_phy_maskset(dev, B43_LPPHY_CLIPCTRTHRESH, 0xF81F, 0xA0);
b43_phy_maskset(dev, B43_LPPHY_GAINDIRECTMISMATCH, 0xE0FF, 0x300);
b43_phy_maskset(dev, B43_LPPHY_HIGAINDB, 0x00FF, 0x2A00);
- b43_phy_maskset(dev, B43_LPPHY_LOWGAINDB, 0x00FF, 0x1E00);
- b43_phy_maskset(dev, B43_LPPHY_VERYLOWGAINDB, 0xFF00, 0xD);
+ if ((bus->chip_id == 0x4325) && (bus->chip_rev == 0)) {
+ b43_phy_maskset(dev, B43_LPPHY_LOWGAINDB, 0x00FF, 0x2100);
+ b43_phy_maskset(dev, B43_LPPHY_VERYLOWGAINDB, 0xFF00, 0xA);
+ } else {
+ b43_phy_maskset(dev, B43_LPPHY_LOWGAINDB, 0x00FF, 0x1E00);
+ b43_phy_maskset(dev, B43_LPPHY_VERYLOWGAINDB, 0xFF00, 0xD);
+ }
b43_phy_maskset(dev, B43_PHY_OFDM(0xFE), 0xFFE0, 0x1F);
b43_phy_maskset(dev, B43_PHY_OFDM(0xFF), 0xFFE0, 0xC);
b43_phy_maskset(dev, B43_PHY_OFDM(0x100), 0xFF00, 0x19);
@@ -114,17 +120,8 @@ static void lpphy_baseband_rev2plus_init
b43_phy_maskset(dev, B43_LPPHY_CLIPCTRTHRESH, 0xFFE0, 0x12);
b43_phy_maskset(dev, B43_LPPHY_GAINMISMATCH, 0x0FFF, 0x9000);
- if (dev->phy.rev < 2) {
- //FIXME this will never execute.
-
- //FIXME 32bit?
- b43_lptab_write(dev, B43_LPTAB32(0x11, 0x14), 0);
- b43_lptab_write(dev, B43_LPTAB32(0x08, 0x12), 0x40);
- } else {
- //FIXME 32bit?
- b43_lptab_write(dev, B43_LPTAB32(0x08, 0x14), 0);
- b43_lptab_write(dev, B43_LPTAB32(0x08, 0x12), 0x40);
- }
+ b43_lptab_write(dev, B43_LPTAB16(0x08, 0x14), 0);
+ b43_lptab_write(dev, B43_LPTAB16(0x08, 0x12), 0x40);
if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) {
b43_phy_set(dev, B43_LPPHY_CRSGAIN_CTL, 0x40);
--
Greetings, Michael.
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
