This adds MCS set parsing to iw. When you can 'iw list' you can
now see the MCS set actually parsed, this can tell you information
such as all the RX/TX MCS indexes supported, max TX spatial streams,
if TX unequal modulation is supported and your max supported HT
RX data rate.
This is as per 802.11n Draft 7 on section 7.3.2.57.4 Supported MCS Set field.
Signed-off-by: Luis R. Rodriguez <lrodriguez@xxxxxxxxxxx>
---
OK now in v2 we don't print the rate if its 0 as the 802.11n Draft 7
indicates that if its 0 it does not indicate the max supported RX rate.
It does refer us to 9.6.0e.5.3 though. We'll need to review that I guess
to get this when this is not set.
info.c | 59 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 59 insertions(+), 0 deletions(-)
diff --git a/info.c b/info.c
index bf3b8bd..7ea8f99 100644
--- a/info.c
+++ b/info.c
@@ -1,3 +1,4 @@
+#include <stdbool.h>
#include <errno.h>
#include <net/if.h>
@@ -20,6 +21,24 @@ static void print_flag(const char *name, int *open)
*open = 1;
}
+static void print_mcs_index(unsigned char *mcs)
+{
+ unsigned int mcs_bit;
+
+ for (mcs_bit = 0; mcs_bit <= 76; mcs_bit++) {
+ unsigned int mcs_octet = mcs_bit/8;
+ unsigned int MCS_RATE_BIT = 1 << mcs_bit % 8;
+ bool mcs_rate_idx_set;
+
+ mcs_rate_idx_set = !!(mcs[mcs_octet] & MCS_RATE_BIT);
+
+ if (!mcs_rate_idx_set)
+ continue;
+
+ printf("\t\t\tMCS index %d\n", mcs_bit);
+ }
+}
+
static int print_phy_handler(struct nl_msg *msg, void *arg)
{
struct nlattr *tb_msg[NL80211_ATTR_MAX + 1];
@@ -128,10 +147,50 @@ static int print_phy_handler(struct nl_msg *msg, void *arg)
}
if (tb_band[NL80211_BAND_ATTR_HT_MCS_SET] &&
nla_len(tb_band[NL80211_BAND_ATTR_HT_MCS_SET]) == 16) {
+ /* As defined in 7.3.2.57.4 Supported MCS Set field */
+ unsigned int tx_max_num_spatial_streams, max_rx_supp_data_rate;
unsigned char *mcs = nla_data(tb_band[NL80211_BAND_ATTR_HT_MCS_SET]);
+ bool tx_mcs_set_defined, tx_mcs_set_equal, tx_unequal_modulation;
+
printf("\t\tHT MCS set: %.2x %.2x %.2x %.2x %.2x %.2x %.2x %.2x %.2x %.2x %.2x %.2x %.2x %.2x %.2x %.2x\n",
mcs[0], mcs[1], mcs[2], mcs[3], mcs[4], mcs[5], mcs[6], mcs[7],
mcs[8], mcs[9], mcs[10], mcs[11], mcs[12], mcs[13], mcs[14], mcs[15]);
+
+ max_rx_supp_data_rate = ((mcs[10] >> 8) & ((mcs[11] & 0x3) << 8));
+ tx_mcs_set_defined = !!(mcs[12] & (1 << 0));
+ tx_mcs_set_equal = !(mcs[12] & (1 << 1));
+ tx_max_num_spatial_streams = (mcs[12] | ((1 << 3) | (1 << 4))) + 1;
+ tx_unequal_modulation = !!(mcs[12] & (1 << 5));
+
+ if (max_rx_supp_data_rate)
+ printf("\t\tHT Max RX data rate: %d Mbps\n", max_rx_supp_data_rate);
+ /* XXX: else see 9.6.0e.5.3 how to get this I think */
+
+ if (tx_mcs_set_defined) {
+ if (tx_mcs_set_equal) {
+ printf("\t\tHT TX/RX MCS rate indexes supported:\n");
+ print_mcs_index(&mcs[0]);
+ } else {
+ printf("\t\tHT RX MCS rate indexes supported:\n");
+ print_mcs_index(&mcs[0]);
+
+ if (tx_unequal_modulation)
+ printf("TX unequal modulation supported\n");
+ else
+ printf("TX unequal modulation not supported\n");
+
+ printf("\t\tHT TX Max spatiel streams: %d\n",
+ tx_max_num_spatial_streams);
+
+ printf("\t\tHT TX MCS rate indexes supported may differ\n");
+ }
+ }
+ else {
+ printf("\t\tHT RX MCS rate indexes supported:\n");
+ print_mcs_index(&mcs[0]);
+ printf("\t\tHT TX MCS rates indexes are undefined\n");
+ }
+
}
#endif
--
1.6.1.2.253.ga34a
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
