This adds code for the baseband init of LP-PHY >=2.
Signed-off-by: Michael Buesch <mb@xxxxxxxxx>
---
Index: wireless-testing/drivers/net/wireless/b43/Makefile
===================================================================
--- wireless-testing.orig/drivers/net/wireless/b43/Makefile 2009-01-31 16:16:57.000000000 +0100
+++ wireless-testing/drivers/net/wireless/b43/Makefile 2009-01-31 16:17:18.000000000 +0100
@@ -6,6 +6,7 @@ b43-y += phy_g.o
b43-y += phy_a.o
b43-$(CONFIG_B43_NPHY) += phy_n.o
b43-$(CONFIG_B43_PHY_LP) += phy_lp.o
+b43-$(CONFIG_B43_PHY_LP) += tables_lpphy.o
b43-y += sysfs.o
b43-y += xmit.o
b43-y += lo.o
Index: wireless-testing/drivers/net/wireless/b43/phy_lp.c
===================================================================
--- wireless-testing.orig/drivers/net/wireless/b43/phy_lp.c 2009-01-31 14:28:05.000000000 +0100
+++ wireless-testing/drivers/net/wireless/b43/phy_lp.c 2009-01-31 16:45:19.000000000 +0100
@@ -3,7 +3,7 @@
Broadcom B43 wireless driver
IEEE 802.11g LP-PHY driver
- Copyright (c) 2008 Michael Buesch <mb@xxxxxxxxx>
+ Copyright (c) 2008-2009 Michael Buesch <mb@xxxxxxxxx>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
@@ -25,6 +25,7 @@
#include "b43.h"
#include "phy_lp.h"
#include "phy_common.h"
+#include "tables_lpphy.h"
static int b43_lpphy_op_allocate(struct b43_wldev *dev)
@@ -69,7 +70,80 @@ static void lpphy_baseband_rev0_1_init(s
static void lpphy_baseband_rev2plus_init(struct b43_wldev *dev)
{
- //TODO
+ struct b43_phy_lp *lpphy = dev->phy.lp;
+
+ b43_phy_write(dev, B43_LPPHY_AFE_DAC_CTL, 0x50);
+ b43_phy_write(dev, B43_LPPHY_AFE_CTL, 0x8800);
+ b43_phy_write(dev, B43_LPPHY_AFE_CTL_OVR, 0);
+ b43_phy_write(dev, B43_LPPHY_AFE_CTL_OVRVAL, 0);
+ b43_phy_write(dev, B43_LPPHY_RF_OVERRIDE_0, 0);
+ b43_phy_write(dev, B43_LPPHY_RF_OVERRIDE_2, 0);
+ b43_phy_write(dev, B43_PHY_OFDM(0xF9), 0);
+ b43_phy_write(dev, B43_LPPHY_TR_LOOKUP_1, 0);
+ b43_phy_set(dev, B43_LPPHY_ADC_COMPENSATION_CTL, 0x10);
+ b43_phy_maskset(dev, B43_LPPHY_OFDMSYNCTHRESH0, 0xFF00, 0x78);
+ b43_phy_maskset(dev, B43_LPPHY_DCOFFSETTRANSIENT, 0xF8FF, 0x200);
+ b43_phy_maskset(dev, B43_LPPHY_DCOFFSETTRANSIENT, 0xFF00, 0x7F);
+ b43_phy_maskset(dev, B43_LPPHY_GAINDIRECTMISMATCH, 0xFF0F, 0x40);
+ b43_phy_maskset(dev, B43_LPPHY_PREAMBLECONFIRMTO, 0xFF00, 0x2);
+ b43_phy_mask(dev, B43_LPPHY_CRSGAIN_CTL, ~0x4000);
+ b43_phy_mask(dev, B43_LPPHY_CRSGAIN_CTL, ~0x2000);
+ b43_phy_set(dev, B43_PHY_OFDM(0x10A), 0x1);
+ b43_phy_maskset(dev, B43_LPPHY_CCKLMSSTEPSIZE, 0xFF01, 0x10);
+ b43_phy_maskset(dev, B43_PHY_OFDM(0xDF), 0xFF00, 0xF4);
+ b43_phy_maskset(dev, B43_PHY_OFDM(0xDF), 0x00FF, 0xF100);//FIXME specs are different
+ b43_phy_write(dev, B43_LPPHY_CLIPTHRESH, 0x48);
+ b43_phy_maskset(dev, B43_LPPHY_HIGAINDB, 0xFF00, 0x46);
+ b43_phy_maskset(dev, B43_PHY_OFDM(0xE4), 0xFF00, 0x10);
+ b43_phy_maskset(dev, B43_LPPHY_PWR_THRESH1, 0xFFF0, 0x9);
+ b43_phy_mask(dev, B43_LPPHY_GAINDIRECTMISMATCH, ~0xF);
+ b43_phy_maskset(dev, B43_LPPHY_VERYLOWGAINDB, 0x00FF, 0x5500);
+ b43_phy_maskset(dev, B43_LPPHY_CLIPCTRTHRESH, 0xF81F, 0xA0);
+ b43_phy_maskset(dev, B43_LPPHY_GAINDIRECTMISMATCH, 0xE0FF, 0x300);
+ b43_phy_maskset(dev, B43_LPPHY_HIGAINDB, 0x00FF, 0x2A00);
+ b43_phy_maskset(dev, B43_LPPHY_LOWGAINDB, 0x00FF, 0x1E00);
+ b43_phy_maskset(dev, B43_LPPHY_VERYLOWGAINDB, 0xFF00, 0xD);
+ b43_phy_maskset(dev, B43_PHY_OFDM(0xFE), 0xFFE0, 0x1F);
+ b43_phy_maskset(dev, B43_PHY_OFDM(0xFF), 0xFFE0, 0xC);
+ b43_phy_maskset(dev, B43_PHY_OFDM(0x100), 0xFF00, 0x19);
+ b43_phy_maskset(dev, B43_PHY_OFDM(0xFF), 0x03FF, 0x3C00);
+ b43_phy_maskset(dev, B43_PHY_OFDM(0xFE), 0xFC1F, 0x3E0);
+ b43_phy_maskset(dev, B43_PHY_OFDM(0xFF), 0xFFE0, 0xC);
+ b43_phy_maskset(dev, B43_PHY_OFDM(0x100), 0x00FF, 0x1900);
+ b43_phy_maskset(dev, B43_LPPHY_CLIPCTRTHRESH, 0x83FF, 0x5800);
+ b43_phy_maskset(dev, B43_LPPHY_CLIPCTRTHRESH, 0xFFE0, 0x12);
+ b43_phy_maskset(dev, B43_LPPHY_GAINMISMATCH, 0x0FFF, 0x9000);
+
+ if (dev->phy.rev < 2) {
+ //FIXME this will never execute.
+
+ //FIXME 32bit?
+ b43_lptab_write(dev, B43_LPTAB32(0x11, 0x14), 0);
+ b43_lptab_write(dev, B43_LPTAB32(0x08, 0x12), 0x40);
+ } else {
+ //FIXME 32bit?
+ b43_lptab_write(dev, B43_LPTAB32(0x08, 0x14), 0);
+ b43_lptab_write(dev, B43_LPTAB32(0x08, 0x12), 0x40);
+ }
+
+ if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) {
+ b43_phy_set(dev, B43_LPPHY_CRSGAIN_CTL, 0x40);
+ b43_phy_maskset(dev, B43_LPPHY_CRSGAIN_CTL, 0xF0FF, 0xB00);
+ b43_phy_maskset(dev, B43_LPPHY_SYNCPEAKCNT, 0xFFF8, 0x6);
+ b43_phy_maskset(dev, B43_LPPHY_MINPWR_LEVEL, 0x00FF, 0x9D00);
+ b43_phy_maskset(dev, B43_LPPHY_MINPWR_LEVEL, 0xFF00, 0xA1);
+ } else /* 5GHz */
+ b43_phy_mask(dev, B43_LPPHY_CRSGAIN_CTL, ~0x40);
+
+ b43_phy_maskset(dev, B43_LPPHY_CRS_ED_THRESH, 0xFF00, 0xB3);
+ b43_phy_maskset(dev, B43_LPPHY_CRS_ED_THRESH, 0x00FF, 0xAD00);
+ b43_phy_maskset(dev, B43_LPPHY_INPUT_PWRDB, 0xFF00, lpphy->rx_pwr_offset);
+ b43_phy_set(dev, B43_LPPHY_RESET_CTL, 0x44);
+ b43_phy_write(dev, B43_LPPHY_RESET_CTL, 0x80);
+ b43_phy_write(dev, B43_LPPHY_AFE_RSSI_CTL_0, 0xA954);
+ b43_phy_write(dev, B43_LPPHY_AFE_RSSI_CTL_1,
+ 0x2000 | ((u16)lpphy->rssi_gs << 10) |
+ ((u16)lpphy->rssi_vc << 4) | lpphy->rssi_vf);
}
static void lpphy_baseband_init(struct b43_wldev *dev)
Index: wireless-testing/drivers/net/wireless/b43/phy_lp.h
===================================================================
--- wireless-testing.orig/drivers/net/wireless/b43/phy_lp.h 2009-01-31 14:29:44.000000000 +0100
+++ wireless-testing/drivers/net/wireless/b43/phy_lp.h 2009-01-31 15:50:31.000000000 +0100
@@ -803,7 +803,47 @@
struct b43_phy_lp {
- //TODO
+ /* Transmit isolation medium band */
+ u8 tx_isolation_med_band; /* FIXME initial value? */
+ /* Transmit isolation low band */
+ u8 tx_isolation_low_band; /* FIXME initial value? */
+ /* Transmit isolation high band */
+ u8 tx_isolation_hi_band; /* FIXME initial value? */
+
+ /* Receive power offset */
+ u8 rx_pwr_offset; /* FIXME initial value? */
+
+ /* TSSI transmit count */
+ u16 tssi_tx_count; /* FIXME initial value? */
+ /* TSSI index */
+ u16 tssi_idx; /* FIXME initial value? */
+ /* TSSI npt */
+ u16 tssi_npt; /* FIXME initial value? */
+
+ /* Target TX frequency */
+ u16 tgt_tx_freq; /* FIXME initial value? */
+
+ /* Transmit power index override */
+ s8 tx_pwr_idx_over; /* FIXME initial value? */
+
+ /* RSSI vf */
+ u8 rssi_vf; /* FIXME initial value? */
+ /* RSSI vc */
+ u8 rssi_vc; /* FIXME initial value? */
+ /* RSSI gs */
+ u8 rssi_gs; /* FIXME initial value? */
+
+ /* RC cap */
+ u8 rc_cap; /* FIXME initial value? */
+ /* BX arch */
+ u8 bx_arch; /* FIXME initial value? */
+
+ /* Full calibration channel */
+ u8 full_calib_chan; /* FIXME initial value? */
+
+ /* Transmit iqlocal best coeffs */
+ bool tx_iqloc_best_coeffs_valid;
+ u8 tx_iqloc_best_coeffs[11];
};
Index: wireless-testing/drivers/net/wireless/b43/tables_lpphy.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ wireless-testing/drivers/net/wireless/b43/tables_lpphy.c 2009-01-31 16:35:19.000000000 +0100
@@ -0,0 +1,89 @@
+/*
+
+ Broadcom B43 wireless driver
+ IEEE 802.11g LP-PHY and radio device data tables
+
+ Copyright (c) 2009 Michael Buesch <mb@xxxxxxxxx>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; see the file COPYING. If not, write to
+ the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor,
+ Boston, MA 02110-1301, USA.
+
+*/
+
+#include "b43.h"
+#include "tables_lpphy.h"
+#include "phy_common.h"
+#include "phy_lp.h"
+
+
+u32 b43_lptab_read(struct b43_wldev *dev, u32 offset)
+{
+ u32 type, value;
+
+ type = offset & B43_LPTAB_TYPEMASK;
+ offset &= ~B43_LPTAB_TYPEMASK;
+ B43_WARN_ON(offset > 0xFFFF);
+
+ switch (type) {
+ case B43_LPTAB_8BIT:
+ b43_phy_write(dev, B43_LPPHY_TABLE_ADDR, offset);
+ value = b43_phy_read(dev, B43_LPPHY_TABLEDATALO) & 0xFF;
+ break;
+ case B43_LPTAB_16BIT:
+ b43_phy_write(dev, B43_LPPHY_TABLE_ADDR, offset);
+ value = b43_phy_read(dev, B43_LPPHY_TABLEDATALO);
+ break;
+ case B43_LPTAB_32BIT:
+ b43_phy_write(dev, B43_LPPHY_TABLE_ADDR, offset);
+ value = b43_phy_read(dev, B43_LPPHY_TABLEDATAHI);
+ value <<= 16;
+ value |= b43_phy_read(dev, B43_LPPHY_TABLEDATALO);
+ break;
+ default:
+ B43_WARN_ON(1);
+ value = 0;
+ }
+
+ return value;
+}
+
+void b43_lptab_write(struct b43_wldev *dev, u32 offset, u32 value)
+{
+ u32 type;
+
+ type = offset & B43_LPTAB_TYPEMASK;
+ offset &= ~B43_LPTAB_TYPEMASK;
+ B43_WARN_ON(offset > 0xFFFF);
+
+ switch (type) {
+ case B43_LPTAB_8BIT:
+ B43_WARN_ON(value & ~0xFF);
+ b43_phy_write(dev, B43_LPPHY_TABLE_ADDR, offset);
+ b43_phy_write(dev, B43_LPPHY_TABLEDATALO, value);
+ break;
+ case B43_LPTAB_16BIT:
+ B43_WARN_ON(value & ~0xFFFF);
+ b43_phy_write(dev, B43_LPPHY_TABLE_ADDR, offset);
+ b43_phy_write(dev, B43_LPPHY_TABLEDATALO, value);
+ break;
+ case B43_LPTAB_32BIT:
+ b43_phy_write(dev, B43_LPPHY_TABLE_ADDR, offset);
+ b43_phy_write(dev, B43_LPPHY_TABLEDATAHI, value >> 16);
+ b43_phy_write(dev, B43_LPPHY_TABLEDATALO, value);
+ break;
+ default:
+ B43_WARN_ON(1);
+ }
+}
Index: wireless-testing/drivers/net/wireless/b43/tables_lpphy.h
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ wireless-testing/drivers/net/wireless/b43/tables_lpphy.h 2009-01-31 16:40:33.000000000 +0100
@@ -0,0 +1,21 @@
+#ifndef B43_TABLES_LPPHY_H_
+#define B43_TABLES_LPPHY_H_
+
+
+#define B43_LPTAB_TYPEMASK 0xF0000000
+#define B43_LPTAB_8BIT 0x10000000
+#define B43_LPTAB_16BIT 0x20000000
+#define B43_LPTAB_32BIT 0x30000000
+#define B43_LPTAB8(table, offset) (((table) << 10) | (offset) | B43_LPTAB_8BIT)
+#define B43_LPTAB16(table, offset) (((table) << 10) | (offset) | B43_LPTAB_16BIT)
+#define B43_LPTAB32(table, offset) (((table) << 10) | (offset) | B43_LPTAB_32BIT)
+
+/* Table definitions */
+#define B43_LPTAB_TXPWR_R2PLUS B43_LPTAB32(0x07, 0) /* TX power lookup table (rev >= 2) */
+#define B43_LPTAB_TXPWR_R0_1 B43_LPTAB32(0xA0, 0) /* TX power lookup table (rev < 2) */
+
+u32 b43_lptab_read(struct b43_wldev *dev, u32 offset);
+void b43_lptab_write(struct b43_wldev *dev, u32 offset, u32 value);
+
+
+#endif /* B43_TABLES_LPPHY_H_ */
--
Greetings, Michael.
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
