Add vendor ID for AMBIT and use it to set the ath5k LED gpio.
base.c:
Changes-licensed-under: 3-Clause-BSD
Signed-off-by: Tulio Magno Quites Machado Filho <tuliom@xxxxxxxxx>
Acked-by: Bob Copeland <me@xxxxxxxxxxxxxxx>
---
v2: fixed order of pci_ids.h
drivers/net/wireless/ath5k/base.c | 8 ++++++--
include/linux/pci_ids.h | 2 ++
2 files changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c
index 57971a9..180518c 100644
--- a/drivers/net/wireless/ath5k/base.c
+++ b/drivers/net/wireless/ath5k/base.c
@@ -2626,8 +2626,12 @@ ath5k_init_leds(struct ath5k_softc *sc)
sc->led_pin = 1;
sc->led_on = 1; /* active high */
}
- /* Pin 3 on Foxconn chips used in Acer Aspire One (0x105b:e008) */
- if (pdev->subsystem_vendor == PCI_VENDOR_ID_FOXCONN) {
+ /*
+ * Pin 3 on Foxconn chips used in Acer Aspire One (0x105b:e008) and
+ * in emachines notebooks with AMBIT subsystem.
+ */
+ if (pdev->subsystem_vendor == PCI_VENDOR_ID_FOXCONN ||
+ pdev->subsystem_vendor == PCI_VENDOR_ID_AMBIT) {
__set_bit(ATH_STAT_LEDSOFT, sc->status);
sc->led_pin = 3;
sc->led_on = 0; /* active low */
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 02e6046..42cc884 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1967,6 +1967,8 @@
#define PCI_VENDOR_ID_SAMSUNG 0x144d
+#define PCI_VENDOR_ID_AMBIT 0x1468
+
#define PCI_VENDOR_ID_MYRICOM 0x14c1
#define PCI_VENDOR_ID_TITAN 0x14D2
--
1.6.0.2
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
