Current code for the RTL8187 is not returning valid retry information, thus the
rate-setting mechanism is not functioning. As a further complication, this info
is only obtained by reading a register, which cannot be read while in interrupt
context.
This patch implements the TX status return to mac80211 through the use of a
work queue.
Signed-off-by: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
Tested-by: Herton Ronaldo Krzesinski <herton@xxxxxxxxxxxxxxx>
Tested-by: Martín Ernesto Barreyro <barreyromartin@xxxxxxxxx>
Acked-by: Hin-Tak Leung <htl10@xxxxxxxxxxxxxxxxxxxxx>
---
John,
This patch fixes a long-standing bug for the RTL8187 that has been present
since the driver was made to work with mac80211. Technically, it is not a
regression, but it would be nice if we could get it into 2.6.29 so that it
could be pushed to stable. I have not Cc'd stable as the patch will need
rebasing to work with 2.6.28, or older.
Larry
---
Index: wireless-testing/drivers/net/wireless/rtl818x/rtl8187.h
===================================================================
--- wireless-testing.orig/drivers/net/wireless/rtl818x/rtl8187.h
+++ wireless-testing/drivers/net/wireless/rtl818x/rtl8187.h
@@ -100,6 +100,8 @@ struct rtl8187_priv {
struct usb_device *udev;
u32 rx_conf;
struct usb_anchor anchored;
+ struct delayed_work work;
+ struct ieee80211_hw *dev;
u16 txpwr_base;
u8 asic_rev;
u8 is_rtl8187b;
@@ -117,7 +119,7 @@ struct rtl8187_priv {
struct {
__le64 buf;
struct sk_buff_head queue;
- } b_tx_status;
+ } b_tx_status; /* This queue is used by both -b and non-b devices */
};
void rtl8187_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data);
Index: wireless-testing/drivers/net/wireless/rtl818x/rtl8187_dev.c
===================================================================
--- wireless-testing.orig/drivers/net/wireless/rtl818x/rtl8187_dev.c
+++ wireless-testing/drivers/net/wireless/rtl818x/rtl8187_dev.c
@@ -177,25 +177,33 @@ static void rtl8187_tx_cb(struct urb *ur
sizeof(struct rtl8187_tx_hdr));
ieee80211_tx_info_clear_status(info);
- if (!urb->status &&
- !(info->flags & IEEE80211_TX_CTL_NO_ACK) &&
- priv->is_rtl8187b) {
- skb_queue_tail(&priv->b_tx_status.queue, skb);
-
- /* queue is "full", discard last items */
- while (skb_queue_len(&priv->b_tx_status.queue) > 5) {
- struct sk_buff *old_skb;
-
- dev_dbg(&priv->udev->dev,
- "transmit status queue full\n");
-
- old_skb = skb_dequeue(&priv->b_tx_status.queue);
- ieee80211_tx_status_irqsafe(hw, old_skb);
- }
- } else {
- if (!(info->flags & IEEE80211_TX_CTL_NO_ACK) && !urb->status)
+ if (!(urb->status) && !(info->flags & IEEE80211_TX_CTL_NO_ACK)) {
+ if (priv->is_rtl8187b) {
+ skb_queue_tail(&priv->b_tx_status.queue, skb);
+
+ /* queue is "full", discard last items */
+ while (skb_queue_len(&priv->b_tx_status.queue) > 5) {
+ struct sk_buff *old_skb;
+
+ dev_dbg(&priv->udev->dev,
+ "transmit status queue full\n");
+
+ old_skb = skb_dequeue(&priv->b_tx_status.queue);
+ ieee80211_tx_status_irqsafe(hw, old_skb);
+ }
+ return;
+ } else {
info->flags |= IEEE80211_TX_STAT_ACK;
+ }
+ }
+ if (priv->is_rtl8187b)
ieee80211_tx_status_irqsafe(hw, skb);
+ else {
+ /* Retry information for the RTI8187 is only available by
+ * reading a register in the device. We are in interrupt mode
+ * here, thus queue the skb and finish on a work queue. */
+ skb_queue_tail(&priv->b_tx_status.queue, skb);
+ queue_delayed_work(hw->workqueue, &priv->work, 0);
}
}
@@ -854,6 +862,34 @@ static int rtl8187b_init_hw(struct ieee8
return 0;
}
+static void rtl8187_work(struct work_struct *work)
+{
+ /* The RTL8187 returns the retry count through register 0xFFFA. In
+ * addition, it appears to be a cumulative retry count, not the
+ * value for the current TX packet. When multiple TX entries are
+ * queued, the retry count will be valid for the last one in the queue.
+ * The "error" should not matter for purposes of rate setting. */
+ struct rtl8187_priv *priv = container_of(work, struct rtl8187_priv,
+ work.work);
+ struct ieee80211_tx_info *info;
+ struct ieee80211_hw *dev = priv->dev;
+ static u16 retry;
+ u16 tmp;
+
+ mutex_lock(&priv->conf_mutex);
+ tmp = rtl818x_ioread16(priv, (__le16 *)0xFFFA);
+ while (skb_queue_len(&priv->b_tx_status.queue) > 0) {
+ struct sk_buff *old_skb;
+
+ old_skb = skb_dequeue(&priv->b_tx_status.queue);
+ info = IEEE80211_SKB_CB(old_skb);
+ info->status.rates[0].count = tmp - retry + 1;
+ ieee80211_tx_status_irqsafe(dev, old_skb);
+ }
+ retry = tmp;
+ mutex_unlock(&priv->conf_mutex);
+}
+
static int rtl8187_start(struct ieee80211_hw *dev)
{
struct rtl8187_priv *priv = dev->priv;
@@ -868,6 +904,7 @@ static int rtl8187_start(struct ieee8021
mutex_lock(&priv->conf_mutex);
init_usb_anchor(&priv->anchored);
+ priv->dev = dev;
if (priv->is_rtl8187b) {
reg = RTL818X_RX_CONF_MGMT |
@@ -935,6 +972,7 @@ static int rtl8187_start(struct ieee8021
reg |= RTL818X_CMD_TX_ENABLE;
reg |= RTL818X_CMD_RX_ENABLE;
rtl818x_iowrite8(priv, &priv->map->CMD, reg);
+ INIT_DELAYED_WORK(&priv->work, rtl8187_work);
mutex_unlock(&priv->conf_mutex);
return 0;
@@ -965,6 +1003,8 @@ static void rtl8187_stop(struct ieee8021
dev_kfree_skb_any(skb);
usb_kill_anchored_urbs(&priv->anchored);
+ if (!priv->is_rtl8187b)
+ cancel_delayed_work_sync(&priv->work);
mutex_unlock(&priv->conf_mutex);
}
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
