Search Linux Wireless

Re: [PATCH] Fix TX rate short preamble detection

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sunday 18 January 2009, Chris Clayton wrote:
> Hi Ivo/John,
> 
> 2009/1/18 Ivo van Doorn <ivdoorn@xxxxxxxxx>:
> > Mac80211 provides 2 structures to handle bitrates, namely
> > ieee80211_rate and ieee80211_tx_rate. To determine the short preamble
> > mode for an outgoing frame, the flag IEEE80211_TX_RC_USE_SHORT_PREAMBLE
> > must be checked on ieee80211_tx_rate and not ieee80211_rate (which rt2x00 did).
> >
> > This fixes a regression which was triggered in 2.6.29-rcX as reported by Chris Clayton.
> >
> 
> I don't think the patch below will apply to 2.6.29-rc because it is
> lagging behind wireless testing and, I would guess, is likely to stay
> that way for 2.6.29 because the merge window is closed. Won't the
> final patch that was provided to me at
> http://marc.info/?l=linux-wireless&m=123229784930740&w=4 be the
> correct one? If so, could John please add:

True. but usually John wants the patch to go through wireless-testing,
which makes below patch the correct one. :)
Anyway, in this case he has the luxoury of having both versions of the patch. ;)

> Tested-By: Chris Clayton <chris2553@xxxxxxxxxxxxxx>
> 
> Cheers,
> 
> Chris
> 
> > Signed-off-by: Ivo van Doorn <IvDoorn@xxxxxxxxx>
> >
> > ---
> > diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
> > index c1e5a05..3dab9b4 100644
> > --- a/drivers/net/wireless/rt2x00/rt2x00queue.c
> > +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
> > @@ -186,10 +186,11 @@ static void rt2x00queue_create_tx_descriptor_seq(struct queue_entry *entry,
> >
> >  static void rt2x00queue_create_tx_descriptor_plcp(struct queue_entry *entry,
> >                                                  struct txentry_desc *txdesc,
> > -                                                 struct ieee80211_rate *rate)
> > +                                                 const struct rt2x00_rate *hwrate)
> >  {
> >        struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
> > -       const struct rt2x00_rate *hwrate = rt2x00_get_rate(rate->hw_value);
> > +       struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
> > +       struct ieee80211_tx_rate *txrate = &tx_info->control.rates[0];
> >        unsigned int data_length;
> >        unsigned int duration;
> >        unsigned int residual;
> > @@ -232,7 +233,7 @@ static void rt2x00queue_create_tx_descriptor_plcp(struct queue_entry *entry,
> >                 * When preamble is enabled we should set the
> >                 * preamble bit for the signal.
> >                 */
> > -               if (rate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE)
> > +               if (txrate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE)
> >                        txdesc->signal |= 0x08;
> >        }
> >  }
> > @@ -326,7 +327,7 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
> >         */
> >        rt2x00crypto_create_tx_descriptor(entry, txdesc);
> >        rt2x00queue_create_tx_descriptor_seq(entry, txdesc);
> > -       rt2x00queue_create_tx_descriptor_plcp(entry, txdesc, rate);
> > +       rt2x00queue_create_tx_descriptor_plcp(entry, txdesc, hwrate);
> >  }
> >
> >  static void rt2x00queue_write_tx_descriptor(struct queue_entry *entry,
> >
> 
> 
> 


--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]
  Powered by Linux