This fixes two issues with the sanity check loop when processing
the country IE:
1. Do not use frequency for the current subband channel check,
this was a big fat typo.
2. Apply the 5 GHz 4-channel steps when considering max channel
on each subband as was done with a recent patch.
Signed-off-by: Luis R. Rodriguez <lrodriguez@xxxxxxxxxxx>
---
net/wireless/reg.c | 30 +++++++++++++++++++-----------
1 files changed, 19 insertions(+), 11 deletions(-)
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 77e45c7..0cc19e7 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -498,6 +498,7 @@ static struct ieee80211_regdomain *country_ie_2_rd(
* calculate the number of reg rules we will need. We will need one
* for each channel subband */
while (country_ie_len >= 3) {
+ int end_channel = 0;
struct ieee80211_country_ie_triplet *triplet =
(struct ieee80211_country_ie_triplet *) country_ie;
int cur_sub_max_channel = 0, cur_channel = 0;
@@ -509,9 +510,25 @@ static struct ieee80211_regdomain *country_ie_2_rd(
continue;
}
+ /* 2 GHz */
+ if (triplet->chans.first_channel <= 14)
+ end_channel = triplet->chans.first_channel +
+ triplet->chans.num_channels;
+ else
+ /*
+ * 5 GHz -- For example in country IEs if the first
+ * channel given is 36 and the number of channels is 4
+ * then the individual channel numbers defined for the
+ * 5 GHz PHY by these parameters are: 36, 40, 44, and 48
+ * and not 36, 37, 38, 39.
+ *
+ * See: http://tinyurl.com/11d-clarification
+ */
+ end_channel = triplet->chans.first_channel +
+ (4 * (triplet->chans.num_channels - 1));
+
cur_channel = triplet->chans.first_channel;
- cur_sub_max_channel = ieee80211_channel_to_frequency(
- cur_channel + triplet->chans.num_channels);
+ cur_sub_max_channel = end_channel;
/* Basic sanity check */
if (cur_sub_max_channel < cur_channel)
@@ -590,15 +607,6 @@ static struct ieee80211_regdomain *country_ie_2_rd(
end_channel = triplet->chans.first_channel +
triplet->chans.num_channels;
else
- /*
- * 5 GHz -- For example in country IEs if the first
- * channel given is 36 and the number of channels is 4
- * then the individual channel numbers defined for the
- * 5 GHz PHY by these parameters are: 36, 40, 44, and 48
- * and not 36, 37, 38, 39.
- *
- * See: http://tinyurl.com/11d-clarification
- */
end_channel = triplet->chans.first_channel +
(4 * (triplet->chans.num_channels - 1));
--
1.6.1.rc3.51.g5832d
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
