On Wednesday 14 January 2009 18:43:27 Larry Finger wrote: > Lorenzo Nava wrote: > > > Today we have also tested a new firmware version that works with > > WPA2-personal (both TKIP and CCMP) and WPA2-enterprise (EAP-TTLS) > > (tested on 4306 and 4318 PCI device). If anybody was interested please > > try new firmware with encryption and let us know if it works correctly, > > thanks! > > On my BCM4318 (Linksys WPC54G, Ver 3) in a Cardbus format in a > WPA2-personal encrypted network with AES algorithm, it nearly worked. > With your firmware, it can scan and authenticate. It even gets an > DHCP-supplied IP address; however, I get no data through the link. In > addition, I see lots of PHY TRANSMISSION ERRORS. When I disable > hardware encryption (nohwcrypt=1), then it works. Support for hardware crypto would require to reverse engineer the PCM firmware, first. So we can't support hw-crypto, except on new devices that don't have a PCM anymore. But these are not rev5 cores :) -- Greetings, Michael. -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html