Hi Christian,
On Sat, 10 Jan 2009 13:21:49 +0100
Christian Lamparter <chunkeey@xxxxxx> wrote:
> > This is how the card identifies in lspci -v:
> > [...]
>
> what's lspci -nnv -s 0a:00.0 ? (I'm looking for the subsystem vendor
> & product id)
0a:00.0 Network controller [0280]: Intersil Corporation ISL3890
[Prism GT/Prism Duette]/ISL3886 [Prism Javelin/Prism Xbow] [1260:3890]
(rev 01)
Subsystem: Standard Microsystems Corp [SMC] SMC2802W Wireless
PCI Adapter [10b8:2802]
Flags: medium devsel, IRQ 16
Memory at fd0fe000 (32-bit, non-prefetchable) [size=8K]
Capabilities: [dc] Power Management version 1
Kernel modules: p54pci
> > p54pci 0000:0a:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> > p54pci 0000:0a:00.0: setting latency timer to 64
> > p54pci 0000:0a:00.0: firmware: requesting isl3886
> > p54: LM86 firmware
> > p54: FW rev 2.13.1.0 - Softmac protocol 5.5
> > phy0: device does not respond!
> > p54pci 0000:0a:00.0: PCI INT A disabled
> > p54pci: probe of 0000:0a:00.0 failed with error -16
> >
> > (I am running 'pristine' 2.6.28 SMP x86_64. Is there a way to make
> > this more verbose?)
> did you compile the old prism54 code as well? If yes, can you please
> try if it works?
My laptop with wireless is at work now, but this was the kernel log
when I tried without the correct p54 firmware name:
p54pci 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
p54pci 0000:09:00.0: setting latency timer to 64
p54pci 0000:09:00.0: firmware: requesting isl3886
0000:09:00.0 (p54pci): cannot find firmware (isl3886)
p54pci 0000:09:00.0: PCI INT A disabled
p54pci: probe of 0000:09:00.0 failed with error -2
Loaded prism54 driver, version 1.2
prism54 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
(I later got rid of prism54 for fear of a conflict. I didn't
actually confirm that prism54 worked, but it didn't complain, and it
was working ok in the past.)
> You can give the wireless-testing git tree a try. (Although, I don't
> think it will work either...) (with this firmware
> http://daemonizer.de/prism54/prism54-fw/fw-softmac/2.13.12.0.arm .
> put it into /lib/firmware and link it to isl3886pci).
Thanks; if we get stuck here it will be worth a try.
Regards,
Mark
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
