W. van den Akker wrote: > > Did some futher testing to exclude problems.... > The wlan0 and eth1 are both part of a bridge. I have removed the eth1 > interface so the the eth1-driver cannot interfer with the ath9k driver. > Also no result. The server still locks. > > What is the right way to combine the eth1 and wlan0 into a bridge. Do I even > need a bridge? The hostapd.config says I must define a bridge when I use the > nl80211driver interface. > The bridge has an IP adress, wlan0 and eth1 are in the same subnet. > > When hostapd is started I have some error-messages. Dont know if they can > hurt... > Failed to set CTS protect in kernel driver > Failed to set Short Slot Time option in kernel driver > Could not set preamble for kernel driver > > I use gentoo's init scripts, but my wlan0 and eth0 are both in a bridge (br0) and it works fine. I don't get the CTS, Short Slot Time, or preamble kernel driver errors. Perhaps you need to comment out a few lines in hostapd.conf? # preamble=1 and I have: rts_threshold=2347 I'll send you a direct e-mail with my .config and hostapd-wep.conf files to help with debugging. Pat Erley -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
