On Tue, 2008-12-16 at 03:55 +0100, Lennert Buytenhek wrote: > Hi all, > > Attached is an initial version of the mwl8k driver for Marvell 88w8xxx > PCI/PCIe wireless parts (against 2.6.27.1). This version was written > and tested against the 88w8687 (802.11b/g), but it shouldn't be hard to > extend the support to other parts in the 8xxx series, since the firmware > interface is very similar between parts. > > There's an occasional timeout warning with mwl8k_stop(), and hardware > crypto is still a work-in-progress, but other than that it looks pretty > stable. > > Feedback appreciated! Would you guys mind if we split this up into an mwl8k core, and separate mwl8335 and mwl8687 modules? In starting to add at least firmware upload for the 8335 last night, I realized that most of the 8687 hardware access code won't work, because it's using DMA for passing the firmware image to the card, while the 8335 uses many small writes to the registers. So I'd like to refactor the driver into those 3 distinct modules instead. Eventually there will probably be 8361 and 8362 modules as well once the TopDog N parts get added. Sound OK? I'm working locally with git, but if I go too far it'll be a ton of work to merge any changes you have. Can we put this in a git tree somewhere and all work from that while we wait for a merge? Dan -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
