* Sync qcu.c with legacy-hal
* Add some more comments
* Set QCU mask to save power (QCU mask controls which QCUs are attached to each DCU, we do a 1:1 mapping)
TODO: Use max QCU from EEPROM, further sync with legacy-hal and sam's hal and a few more minor fixes.
I think after this we are ready to implement WME on the driver part. Anyone interested ?
Signed-Off-by: Nick Kossifidis <mickflemm@xxxxxxxxx>
---
diff --git a/drivers/net/wireless/ath5k/qcu.c b/drivers/net/wireless/ath5k/qcu.c
index 1b7bc50..5094c39 100644
--- a/drivers/net/wireless/ath5k/qcu.c
+++ b/drivers/net/wireless/ath5k/qcu.c
@@ -148,6 +148,7 @@ int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, enum ath5k_tx_queue queue_type,
*/
u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue)
{
+ u32 pending;
ATH5K_TRACE(ah->ah_sc);
AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
@@ -159,7 +160,15 @@ u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue)
if (ah->ah_version == AR5K_AR5210)
return false;
- return AR5K_QUEUE_STATUS(queue) & AR5K_QCU_STS_FRMPENDCNT;
+ pending = (AR5K_QUEUE_STATUS(queue) & AR5K_QCU_STS_FRMPENDCNT);
+
+ /* It's possible to have no frames pending even if TXE
+ * is set. To indicate that q has not stopped return
+ * true */
+ if (!pending && AR5K_REG_READ_Q(ah, AR5K_QCU_TXE, queue))
+ return true;
+
+ return pending;
}
/*
@@ -324,8 +333,18 @@ int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue)
/*
* Set misc registers
*/
- ath5k_hw_reg_write(ah, AR5K_QCU_MISC_DCU_EARLY,
- AR5K_QUEUE_MISC(queue));
+ /* Enable DCU early termination for this queue */
+ AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
+ AR5K_QCU_MISC_DCU_EARLY);
+
+ /* Enable DCU to wait for next fragment from QCU */
+ AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue),
+ AR5K_DCU_MISC_FRAG_WAIT);
+
+ /* On Maui and Spirit use the global seqnum on DCU */
+ if (ah->ah_mac_version < AR5K_SREV_AR5211)
+ AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue),
+ AR5K_DCU_MISC_SEQNUM_CTL);
if (tq->tqi_cbr_period) {
ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_cbr_period,
@@ -341,7 +360,8 @@ int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue)
AR5K_QCU_MISC_CBR_THRES_ENABLE);
}
- if (tq->tqi_ready_time)
+ if (tq->tqi_ready_time &&
+ (tq->tqi_type != AR5K_TX_QUEUE_ID_CAB))
ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_ready_time,
AR5K_QCU_RDYTIMECFG_INTVAL) |
AR5K_QCU_RDYTIMECFG_ENABLE,
@@ -383,13 +403,6 @@ int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue)
AR5K_DCU_MISC_ARBLOCK_CTL_S) |
AR5K_DCU_MISC_POST_FR_BKOFF_DIS |
AR5K_DCU_MISC_BCN_ENABLE);
-
- ath5k_hw_reg_write(ah, ((AR5K_TUNE_BEACON_INTERVAL -
- (AR5K_TUNE_SW_BEACON_RESP -
- AR5K_TUNE_DMA_BEACON_RESP) -
- AR5K_TUNE_ADDITIONAL_SWBA_BACKOFF) * 1024) |
- AR5K_QCU_RDYTIMECFG_ENABLE,
- AR5K_QUEUE_RDYTIMECFG(queue));
break;
case AR5K_TX_QUEUE_CAB:
@@ -398,6 +411,13 @@ int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue)
AR5K_QCU_MISC_CBREXP_DIS |
AR5K_QCU_MISC_CBREXP_BCN_DIS);
+ ath5k_hw_reg_write(ah, ((AR5K_TUNE_BEACON_INTERVAL -
+ (AR5K_TUNE_SW_BEACON_RESP -
+ AR5K_TUNE_DMA_BEACON_RESP) -
+ AR5K_TUNE_ADDITIONAL_SWBA_BACKOFF) * 1024) |
+ AR5K_QCU_RDYTIMECFG_ENABLE,
+ AR5K_QUEUE_RDYTIMECFG(queue));
+
AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue),
(AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL <<
AR5K_DCU_MISC_ARBLOCK_CTL_S));
@@ -413,6 +433,8 @@ int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue)
break;
}
+ /* TODO: Handle frame compression */
+
/*
* Enable interrupts for this tx queue
* in the secondary interrupt mask registers
@@ -483,6 +505,9 @@ int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue)
* by setting AR5K_TXNOFRM to zero */
if (ah->ah_txq_imr_nofrm == 0)
ath5k_hw_reg_write(ah, 0, AR5K_TXNOFRM);
+
+ /* Set QCU mask for this DCU to save power */
+ AR5K_REG_WRITE_Q(ah, AR5K_QUEUE_QCUMASK(queue), queue);
}
return 0;
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
