This patch addresses an issue where, despite the AP supporting 40MHz
bandwidth, the connection was limited to 20MHz. Without this fix,
even if the access point supports 40MHz, the bandwidth after
connection remains at 20MHz. This issue is not a regression.
Signed-off-by: Jeff Chen <jeff.chen_1@xxxxxxx>
---
drivers/net/wireless/marvell/mwifiex/11n.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/marvell/mwifiex/11n.c b/drivers/net/wireless/marvell/mwifiex/11n.c
index 66f0f5377ac1..738bafc3749b 100644
--- a/drivers/net/wireless/marvell/mwifiex/11n.c
+++ b/drivers/net/wireless/marvell/mwifiex/11n.c
@@ -403,12 +403,14 @@ mwifiex_cmd_append_11n_tlv(struct mwifiex_private *priv,
if (sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 &&
bss_desc->bcn_ht_oper->ht_param &
- IEEE80211_HT_PARAM_CHAN_WIDTH_ANY)
+ IEEE80211_HT_PARAM_CHAN_WIDTH_ANY) {
+ chan_list->chan_scan_param[0].radio_type |=
+ CHAN_BW_40MHZ << 2;
SET_SECONDARYCHAN(chan_list->chan_scan_param[0].
radio_type,
(bss_desc->bcn_ht_oper->ht_param &
IEEE80211_HT_PARAM_CHA_SEC_OFFSET));
-
+ }
*buffer += struct_size(chan_list, chan_scan_param, 1);
ret_len += struct_size(chan_list, chan_scan_param, 1);
}
base-commit: 54be64fdf3ba6dbad2f5c48e466e1db43ad74bca
--
2.34.1
