On 3/5/2025 10:55 AM, Raj Kumar Bhagat wrote: > From: Balamurugan S <quic_bselvara@xxxxxxxxxxx> > > Currently only PCI devices are supported in Ath12k driver. Refactor > Ath12k module_init and module_exit to include Ath12k AHB support. > > Add Ath12k AHB support in Kconfig with dependency on Remoteproc > driver. Ath12k AHB support relies on remoteproc driver for firmware > download, power up/down etc. > > Tested-on: IPQ5332 hw1.0 AHB WLAN.WBE.1.3.1-00130-QCAHKSWPL_SILICONZ-1 > Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00210-QCAHKSWPL_SILICONZ-1 > > Signed-off-by: Balamurugan S <quic_bselvara@xxxxxxxxxxx> > Co-developed-by: P Praneesh <quic_ppranees@xxxxxxxxxxx> > Signed-off-by: P Praneesh <quic_ppranees@xxxxxxxxxxx> > Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@xxxxxxxxxxx> > --- > drivers/net/wireless/ath/ath12k/Kconfig | 6 ++++ > drivers/net/wireless/ath/ath12k/Makefile | 1 + > drivers/net/wireless/ath/ath12k/ahb.h | 11 ++++++++ > drivers/net/wireless/ath/ath12k/core.c | 35 ++++++++++++++++++++++-- > drivers/net/wireless/ath/ath12k/pci.c | 10 ++----- > drivers/net/wireless/ath/ath12k/pci.h | 4 ++- > 6 files changed, 55 insertions(+), 12 deletions(-) > > diff --git a/drivers/net/wireless/ath/ath12k/Kconfig b/drivers/net/wireless/ath/ath12k/Kconfig > index 52a1bb19e3da..b2bfcaca00b3 100644 > --- a/drivers/net/wireless/ath/ath12k/Kconfig > +++ b/drivers/net/wireless/ath/ath12k/Kconfig > @@ -15,6 +15,12 @@ config ATH12K > > If you choose to build a module, it'll be called ath12k. > > +config ATH12K_AHB > + bool "QTI ath12k AHB support" > + depends on ATH12K && REMOTEPROC && QCOM_Q6V5_WCSS_SEC Just to state publicly what I said to you privately, I cannot accept this series since I cannot enable the feature, even to do a sanity build, since the patchset that introduces QCOM_Q6V5_WCSS_SEC is not yet accepted. So moving this to deferred in patchwork. Let me know when QCOM_Q6V5_WCSS_SEC is accepted. /jeff
