Convert 'struct pci_dev' to 'struct device' to make it usable on the AHB
bus as well.
Signed-off-by: Gabor Juhos <juhosg@xxxxxxxxxxx>
Signed-off-by: Imre Kaloz <kaloz@xxxxxxxxxxx>
---
drivers/net/wireless/ath9k/Makefile | 1 +
drivers/net/wireless/ath9k/core.h | 16 ++
drivers/net/wireless/ath9k/main.c | 368 ++---------------------------------
drivers/net/wireless/ath9k/pci.c | 357 +++++++++++++++++++++++++++++++++
4 files changed, 395 insertions(+), 347 deletions(-)
diff --git a/drivers/net/wireless/ath9k/Makefile b/drivers/net/wireless/ath9k/Makefile
index 1209d14..af3f39b 100644
--- a/drivers/net/wireless/ath9k/Makefile
+++ b/drivers/net/wireless/ath9k/Makefile
@@ -11,6 +11,7 @@ ath9k-y += hw.o \
xmit.o \
rc.o
+ath9k-$(CONFIG_PCI) += pci.o
ath9k-$(CONFIG_ATH9K_DEBUG) += debug.o
obj-$(CONFIG_ATH9K) += ath9k.o
diff --git a/drivers/net/wireless/ath9k/core.h b/drivers/net/wireless/ath9k/core.h
index 4833598..73a409b 100644
--- a/drivers/net/wireless/ath9k/core.h
+++ b/drivers/net/wireless/ath9k/core.h
@@ -857,4 +857,20 @@ static inline void ath_bus_cleanup(struct ath_softc *sc)
sc->bus_ops->cleanup(sc);
}
+extern struct ieee80211_ops ath9k_ops;
+
+irqreturn_t ath_isr(int irq, void *dev);
+int ath_attach(u16 devid, struct ath_softc *sc);
+void ath_detach(struct ath_softc *sc);
+const char *ath_mac_bb_name(u32 mac_bb_version);
+const char *ath_rf_name(u16 rf_version);
+
+#ifdef CONFIG_PCI
+int ath_pci_init(void);
+void ath_pci_exit(void);
+#else
+static inline int ath_pci_init(void) { return 0; };
+static inline void ath_pci_exit(void) {};
+#endif
+
#endif /* CORE_H */
diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c
index e126b65..423cf3b 100644
--- a/drivers/net/wireless/ath9k/main.c
+++ b/drivers/net/wireless/ath9k/main.c
@@ -28,37 +28,6 @@ MODULE_DESCRIPTION("Support for Atheros 802.11n wireless LAN cards.");
MODULE_SUPPORTED_DEVICE("Atheros 802.11n WLAN cards");
MODULE_LICENSE("Dual BSD/GPL");
-static struct pci_device_id ath_pci_id_table[] __devinitdata = {
- { PCI_VDEVICE(ATHEROS, 0x0023) }, /* PCI */
- { PCI_VDEVICE(ATHEROS, 0x0024) }, /* PCI-E */
- { PCI_VDEVICE(ATHEROS, 0x0027) }, /* PCI */
- { PCI_VDEVICE(ATHEROS, 0x0029) }, /* PCI */
- { PCI_VDEVICE(ATHEROS, 0x002A) }, /* PCI-E */
- { PCI_VDEVICE(ATHEROS, 0x002B) }, /* PCI-E */
- { 0 }
-};
-
-static void ath_detach(struct ath_softc *sc);
-
-/* return bus cachesize in 4B word units */
-static void ath_pci_read_cachesize(struct ath_softc *sc, int *csz)
-{
- u8 u8tmp;
-
- pci_read_config_byte(sc->pdev, PCI_CACHE_LINE_SIZE, (u8 *)&u8tmp);
- *csz = (int)u8tmp;
-
- /*
- * This check was put in to avoid "unplesant" consequences if
- * the bootrom has not fully initialized all PCI devices.
- * Sometimes the cache line size register is not set
- */
-
- if (*csz == 0)
- *csz = DEFAULT_CACHELINE >> 2; /* Use the default size */
-}
-
-
static void ath_setcurmode(struct ath_softc *sc, enum wireless_mode mode)
{
sc->cur_rate_table = sc->hw_rate_table[mode];
@@ -499,7 +468,7 @@ static void ath9k_tasklet(unsigned long data)
ath9k_hw_set_interrupts(sc->sc_ah, sc->sc_imask);
}
-static irqreturn_t ath_isr(int irq, void *dev)
+irqreturn_t ath_isr(int irq, void *dev)
{
struct ath_softc *sc = dev;
struct ath_hal *ah = sc->sc_ah;
@@ -1287,7 +1256,7 @@ static int ath_start_rfkill_poll(struct ath_softc *sc)
}
#endif /* CONFIG_RFKILL */
-static void ath_detach(struct ath_softc *sc)
+void ath_detach(struct ath_softc *sc)
{
struct ieee80211_hw *hw = sc->hw;
int i = 0;
@@ -1538,7 +1507,7 @@ bad:
return error;
}
-static int ath_attach(u16 devid, struct ath_softc *sc)
+int ath_attach(u16 devid, struct ath_softc *sc)
{
struct ieee80211_hw *hw = sc->hw;
int error = 0;
@@ -2466,7 +2435,7 @@ static int ath9k_ampdu_action(struct ieee80211_hw *hw,
return ret;
}
-static struct ieee80211_ops ath9k_ops = {
+struct ieee80211_ops ath9k_ops = {
.tx = ath9k_tx,
.start = ath9k_start,
.stop = ath9k_stop,
@@ -2510,7 +2479,7 @@ static struct {
/*
* Return the MAC/BB name. "????" is returned if the MAC/BB is unknown.
*/
-static const char *
+const char *
ath_mac_bb_name(u32 mac_bb_version)
{
int i;
@@ -2527,7 +2496,7 @@ ath_mac_bb_name(u32 mac_bb_version)
/*
* Return the RF name. "????" is returned if the RF is unknown.
*/
-static const char *
+const char *
ath_rf_name(u16 rf_version)
{
int i;
@@ -2541,306 +2510,7 @@ ath_rf_name(u16 rf_version)
return "????";
}
-static dma_addr_t ath_pci_map_single_to_device(struct ath_softc *sc,
- void *p, size_t size)
-{
- return pci_map_single(sc->pdev, p, size, PCI_DMA_TODEVICE);
-}
-
-static void ath_pci_unmap_single_to_device(struct ath_softc *sc,
- dma_addr_t da, size_t size)
-{
- pci_unmap_single(sc->pdev, da, size, PCI_DMA_TODEVICE);
-}
-
-static dma_addr_t ath_pci_map_single_from_device(struct ath_softc *sc,
- void *p, size_t size)
-{
- return pci_map_single(sc->pdev, p, size, PCI_DMA_FROMDEVICE);
-}
-
-static void ath_pci_unmap_single_from_device(struct ath_softc *sc,
- dma_addr_t da, size_t size)
-{
- pci_unmap_single(sc->pdev, da, size, PCI_DMA_FROMDEVICE);
-}
-
-static int ath_pci_dma_mapping_error(struct ath_softc *sc, dma_addr_t da)
-{
- return pci_dma_mapping_error(sc->pdev, da);
-}
-
-static void ath_pci_sync_single_for_cpu(struct ath_softc *sc, dma_addr_t da,
- size_t size)
-{
- pci_dma_sync_single_for_cpu(sc->pdev, da, size,
- PCI_DMA_FROMDEVICE);
-}
-
-static void *ath_pci_dma_alloc(struct ath_softc *sc, size_t size,
- dma_addr_t *pda)
-{
- return pci_alloc_consistent(sc->pdev, size, pda);
-}
-
-static void ath_pci_dma_free(struct ath_softc *sc, size_t size,
- void *p, dma_addr_t da)
-{
- pci_free_consistent(sc->pdev, size, p, da);
-}
-
-static u32 ath_pci_reg_read(struct ath_hal *ah, unsigned reg)
-{
- return ioread32(ah->ah_sh + reg);
-}
-
-static void ath_pci_reg_write(struct ath_hal *ah, unsigned reg, u32 val)
-{
- iowrite32(val, ah->ah_sh + reg);
-}
-
-static void ath_pci_cleanup(struct ath_softc *sc)
-{
- ath_detach(sc);
- if (sc->pdev->irq)
- free_irq(sc->pdev->irq, sc);
- pci_iounmap(sc->pdev, sc->mem);
- pci_release_region(sc->pdev, 0);
- pci_disable_device(sc->pdev);
- ieee80211_free_hw(sc->hw);
-}
-
-static struct ath_bus_ops ath_pci_bus_ops = {
- .dma_map_single_to_device = ath_pci_map_single_to_device,
- .dma_unmap_single_to_device = ath_pci_unmap_single_to_device,
- .dma_map_single_from_device = ath_pci_map_single_from_device,
- .dma_unmap_single_from_device = ath_pci_unmap_single_from_device,
- .dma_map_single_to_device = ath_pci_map_single_to_device,
- .dma_mapping_error = ath_pci_dma_mapping_error,
- .dma_sync_single_for_cpu = ath_pci_sync_single_for_cpu,
- .dma_alloc = ath_pci_dma_alloc,
- .dma_free = ath_pci_dma_free,
-
- .reg_read = ath_pci_reg_read,
- .reg_write = ath_pci_reg_write,
-
- .read_cachesize = ath_pci_read_cachesize,
-
- .cleanup = ath_pci_cleanup,
-};
-
-static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
-{
- void __iomem *mem;
- struct ath_softc *sc;
- struct ieee80211_hw *hw;
- u8 csz;
- u32 val;
- int ret = 0;
- struct ath_hal *ah;
-
- if (pci_enable_device(pdev))
- return -EIO;
-
- ret = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
-
- if (ret) {
- printk(KERN_ERR "ath9k: 32-bit DMA not available\n");
- goto bad;
- }
-
- ret = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
-
- if (ret) {
- printk(KERN_ERR "ath9k: 32-bit DMA consistent "
- "DMA enable failed\n");
- goto bad;
- }
-
- /*
- * Cache line size is used to size and align various
- * structures used to communicate with the hardware.
- */
- pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &csz);
- if (csz == 0) {
- /*
- * Linux 2.4.18 (at least) writes the cache line size
- * register as a 16-bit wide register which is wrong.
- * We must have this setup properly for rx buffer
- * DMA to work so force a reasonable value here if it
- * comes up zero.
- */
- csz = L1_CACHE_BYTES / sizeof(u32);
- pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, csz);
- }
- /*
- * The default setting of latency timer yields poor results,
- * set it to the value used by other systems. It may be worth
- * tweaking this setting more.
- */
- pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xa8);
-
- pci_set_master(pdev);
-
- /*
- * Disable the RETRY_TIMEOUT register (0x41) to keep
- * PCI Tx retries from interfering with C3 CPU state.
- */
- pci_read_config_dword(pdev, 0x40, &val);
- if ((val & 0x0000ff00) != 0)
- pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
-
- ret = pci_request_region(pdev, 0, "ath9k");
- if (ret) {
- dev_err(&pdev->dev, "PCI memory region reserve error\n");
- ret = -ENODEV;
- goto bad;
- }
-
- mem = pci_iomap(pdev, 0, 0);
- if (!mem) {
- printk(KERN_ERR "PCI memory map error\n") ;
- ret = -EIO;
- goto bad1;
- }
-
- hw = ieee80211_alloc_hw(sizeof(struct ath_softc), &ath9k_ops);
- if (hw == NULL) {
- printk(KERN_ERR "ath_pci: no memory for ieee80211_hw\n");
- goto bad2;
- }
-
- SET_IEEE80211_DEV(hw, &pdev->dev);
- pci_set_drvdata(pdev, hw);
-
- sc = hw->priv;
- sc->hw = hw;
- sc->pdev = pdev;
- sc->mem = mem;
- sc->bus_ops = &ath_pci_bus_ops;
-
- if (ath_attach(id->device, sc) != 0) {
- ret = -ENODEV;
- goto bad3;
- }
-
- /* setup interrupt service routine */
-
- if (request_irq(pdev->irq, ath_isr, IRQF_SHARED, "ath", sc)) {
- printk(KERN_ERR "%s: request_irq failed\n",
- wiphy_name(hw->wiphy));
- ret = -EIO;
- goto bad4;
- }
-
- ah = sc->sc_ah;
- printk(KERN_INFO
- "%s: Atheros AR%s MAC/BB Rev:%x "
- "AR%s RF Rev:%x: mem=0x%lx, irq=%d\n",
- wiphy_name(hw->wiphy),
- ath_mac_bb_name(ah->ah_macVersion),
- ah->ah_macRev,
- ath_rf_name((ah->ah_analog5GhzRev & AR_RADIO_SREV_MAJOR)),
- ah->ah_phyRev,
- (unsigned long)mem, pdev->irq);
-
- return 0;
-bad4:
- ath_detach(sc);
-bad3:
- ieee80211_free_hw(hw);
-bad2:
- pci_iounmap(pdev, mem);
-bad1:
- pci_release_region(pdev, 0);
-bad:
- pci_disable_device(pdev);
- return ret;
-}
-
-static void ath_pci_remove(struct pci_dev *pdev)
-{
- struct ieee80211_hw *hw = pci_get_drvdata(pdev);
- struct ath_softc *sc = hw->priv;
-
- ath_pci_cleanup(sc);
-}
-
-#ifdef CONFIG_PM
-
-static int ath_pci_suspend(struct pci_dev *pdev, pm_message_t state)
-{
- struct ieee80211_hw *hw = pci_get_drvdata(pdev);
- struct ath_softc *sc = hw->priv;
-
- ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1);
-
-#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
- if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_RFSILENT)
- cancel_delayed_work_sync(&sc->rf_kill.rfkill_poll);
-#endif
-
- pci_save_state(pdev);
- pci_disable_device(pdev);
- pci_set_power_state(pdev, 3);
-
- return 0;
-}
-
-static int ath_pci_resume(struct pci_dev *pdev)
-{
- struct ieee80211_hw *hw = pci_get_drvdata(pdev);
- struct ath_softc *sc = hw->priv;
- u32 val;
- int err;
-
- err = pci_enable_device(pdev);
- if (err)
- return err;
- pci_restore_state(pdev);
- /*
- * Suspend/Resume resets the PCI configuration space, so we have to
- * re-disable the RETRY_TIMEOUT register (0x41) to keep
- * PCI Tx retries from interfering with C3 CPU state
- */
- pci_read_config_dword(pdev, 0x40, &val);
- if ((val & 0x0000ff00) != 0)
- pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
-
- /* Enable LED */
- ath9k_hw_cfg_output(sc->sc_ah, ATH_LED_PIN,
- AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
- ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1);
-
-#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
- /*
- * check the h/w rfkill state on resume
- * and start the rfkill poll timer
- */
- if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_RFSILENT)
- queue_delayed_work(sc->hw->workqueue,
- &sc->rf_kill.rfkill_poll, 0);
-#endif
-
- return 0;
-}
-
-#endif /* CONFIG_PM */
-
-MODULE_DEVICE_TABLE(pci, ath_pci_id_table);
-
-static struct pci_driver ath_pci_driver = {
- .name = "ath9k",
- .id_table = ath_pci_id_table,
- .probe = ath_pci_probe,
- .remove = ath_pci_remove,
-#ifdef CONFIG_PM
- .suspend = ath_pci_suspend,
- .resume = ath_pci_resume,
-#endif /* CONFIG_PM */
-};
-
-static int __init init_ath_pci(void)
+static int __init ath9k_init(void)
{
int error;
@@ -2852,26 +2522,30 @@ static int __init init_ath_pci(void)
printk(KERN_ERR
"Unable to register rate control algorithm: %d\n",
error);
- ath_rate_control_unregister();
- return error;
+ goto err_out;
}
- if (pci_register_driver(&ath_pci_driver) < 0) {
+ error = ath_pci_init();
+ if (error < 0) {
printk(KERN_ERR
"ath_pci: No devices found, driver not installed.\n");
- ath_rate_control_unregister();
- pci_unregister_driver(&ath_pci_driver);
- return -ENODEV;
+ error = -ENODEV;
+ goto err_rate_unregister;
}
return 0;
+
+ err_rate_unregister:
+ ath_rate_control_unregister();
+ err_out:
+ return error;
}
-module_init(init_ath_pci);
+module_init(ath9k_init);
-static void __exit exit_ath_pci(void)
+static void __exit ath9k_exit(void)
{
+ ath_pci_exit();
ath_rate_control_unregister();
- pci_unregister_driver(&ath_pci_driver);
printk(KERN_INFO "%s: Driver unloaded\n", dev_info);
}
-module_exit(exit_ath_pci);
+module_exit(ath9k_exit);
diff --git a/drivers/net/wireless/ath9k/pci.c b/drivers/net/wireless/ath9k/pci.c
new file mode 100644
index 0000000..1bb4787
--- /dev/null
+++ b/drivers/net/wireless/ath9k/pci.c
@@ -0,0 +1,357 @@
+/*
+ * Copyright (c) 2008 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/nl80211.h>
+#include "core.h"
+#include "reg.h"
+#include "hw.h"
+
+static struct pci_device_id ath_pci_id_table[] __devinitdata = {
+ { PCI_VDEVICE(ATHEROS, 0x0023) }, /* PCI */
+ { PCI_VDEVICE(ATHEROS, 0x0024) }, /* PCI-E */
+ { PCI_VDEVICE(ATHEROS, 0x0027) }, /* PCI */
+ { PCI_VDEVICE(ATHEROS, 0x0029) }, /* PCI */
+ { PCI_VDEVICE(ATHEROS, 0x002A) }, /* PCI-E */
+ { PCI_VDEVICE(ATHEROS, 0x002B) }, /* PCI-E */
+ { 0 }
+};
+
+/* return bus cachesize in 4B word units */
+static void ath_pci_read_cachesize(struct ath_softc *sc, int *csz)
+{
+ u8 u8tmp;
+
+ pci_read_config_byte(sc->pdev, PCI_CACHE_LINE_SIZE, (u8 *)&u8tmp);
+ *csz = (int)u8tmp;
+
+ /*
+ * This check was put in to avoid "unplesant" consequences if
+ * the bootrom has not fully initialized all PCI devices.
+ * Sometimes the cache line size register is not set
+ */
+
+ if (*csz == 0)
+ *csz = DEFAULT_CACHELINE >> 2; /* Use the default size */
+}
+
+static dma_addr_t ath_pci_map_single_to_device(struct ath_softc *sc,
+ void *p, size_t size)
+{
+ return pci_map_single(sc->pdev, p, size, PCI_DMA_TODEVICE);
+}
+
+static void ath_pci_unmap_single_to_device(struct ath_softc *sc,
+ dma_addr_t da, size_t size)
+{
+ pci_unmap_single(sc->pdev, da, size, PCI_DMA_TODEVICE);
+}
+
+static dma_addr_t ath_pci_map_single_from_device(struct ath_softc *sc,
+ void *p, size_t size)
+{
+ return pci_map_single(sc->pdev, p, size, PCI_DMA_FROMDEVICE);
+}
+
+static void ath_pci_unmap_single_from_device(struct ath_softc *sc,
+ dma_addr_t da, size_t size)
+{
+ pci_unmap_single(sc->pdev, da, size, PCI_DMA_FROMDEVICE);
+}
+
+static int ath_pci_dma_mapping_error(struct ath_softc *sc, dma_addr_t da)
+{
+ return pci_dma_mapping_error(sc->pdev, da);
+}
+
+static void ath_pci_sync_single_for_cpu(struct ath_softc *sc, dma_addr_t da,
+ size_t size)
+{
+ pci_dma_sync_single_for_cpu(sc->pdev, da, size,
+ PCI_DMA_FROMDEVICE);
+}
+
+static void *ath_pci_dma_alloc(struct ath_softc *sc, size_t size,
+ dma_addr_t *pda)
+{
+ return pci_alloc_consistent(sc->pdev, size, pda);
+}
+
+static void ath_pci_dma_free(struct ath_softc *sc, size_t size,
+ void *p, dma_addr_t da)
+{
+ pci_free_consistent(sc->pdev, size, p, da);
+}
+
+static u32 ath_pci_reg_read(struct ath_hal *ah, unsigned reg)
+{
+ return ioread32(ah->ah_sh + reg);
+}
+
+static void ath_pci_reg_write(struct ath_hal *ah, unsigned reg, u32 val)
+{
+ iowrite32(val, ah->ah_sh + reg);
+}
+
+static void ath_pci_cleanup(struct ath_softc *sc)
+{
+ ath_detach(sc);
+ if (sc->pdev->irq)
+ free_irq(sc->pdev->irq, sc);
+ pci_iounmap(sc->pdev, sc->mem);
+ pci_release_region(sc->pdev, 0);
+ pci_disable_device(sc->pdev);
+ ieee80211_free_hw(sc->hw);
+}
+
+static struct ath_bus_ops ath_pci_bus_ops = {
+ .dma_map_single_to_device = ath_pci_map_single_to_device,
+ .dma_unmap_single_to_device = ath_pci_unmap_single_to_device,
+ .dma_map_single_from_device = ath_pci_map_single_from_device,
+ .dma_unmap_single_from_device = ath_pci_unmap_single_from_device,
+ .dma_map_single_to_device = ath_pci_map_single_to_device,
+ .dma_mapping_error = ath_pci_dma_mapping_error,
+ .dma_sync_single_for_cpu = ath_pci_sync_single_for_cpu,
+ .dma_alloc = ath_pci_dma_alloc,
+ .dma_free = ath_pci_dma_free,
+
+ .reg_read = ath_pci_reg_read,
+ .reg_write = ath_pci_reg_write,
+
+ .read_cachesize = ath_pci_read_cachesize,
+
+ .cleanup = ath_pci_cleanup,
+};
+
+static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ void __iomem *mem;
+ struct ath_softc *sc;
+ struct ieee80211_hw *hw;
+ u8 csz;
+ u32 val;
+ int ret = 0;
+ struct ath_hal *ah;
+
+ if (pci_enable_device(pdev))
+ return -EIO;
+
+ ret = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+
+ if (ret) {
+ printk(KERN_ERR "ath9k: 32-bit DMA not available\n");
+ goto bad;
+ }
+
+ ret = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+
+ if (ret) {
+ printk(KERN_ERR "ath9k: 32-bit DMA consistent "
+ "DMA enable failed\n");
+ goto bad;
+ }
+
+ /*
+ * Cache line size is used to size and align various
+ * structures used to communicate with the hardware.
+ */
+ pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &csz);
+ if (csz == 0) {
+ /*
+ * Linux 2.4.18 (at least) writes the cache line size
+ * register as a 16-bit wide register which is wrong.
+ * We must have this setup properly for rx buffer
+ * DMA to work so force a reasonable value here if it
+ * comes up zero.
+ */
+ csz = L1_CACHE_BYTES / sizeof(u32);
+ pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, csz);
+ }
+ /*
+ * The default setting of latency timer yields poor results,
+ * set it to the value used by other systems. It may be worth
+ * tweaking this setting more.
+ */
+ pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xa8);
+
+ pci_set_master(pdev);
+
+ /*
+ * Disable the RETRY_TIMEOUT register (0x41) to keep
+ * PCI Tx retries from interfering with C3 CPU state.
+ */
+ pci_read_config_dword(pdev, 0x40, &val);
+ if ((val & 0x0000ff00) != 0)
+ pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
+
+ ret = pci_request_region(pdev, 0, "ath9k");
+ if (ret) {
+ dev_err(&pdev->dev, "PCI memory region reserve error\n");
+ ret = -ENODEV;
+ goto bad;
+ }
+
+ mem = pci_iomap(pdev, 0, 0);
+ if (!mem) {
+ printk(KERN_ERR "PCI memory map error\n") ;
+ ret = -EIO;
+ goto bad1;
+ }
+
+ hw = ieee80211_alloc_hw(sizeof(struct ath_softc), &ath9k_ops);
+ if (hw == NULL) {
+ printk(KERN_ERR "ath_pci: no memory for ieee80211_hw\n");
+ goto bad2;
+ }
+
+ SET_IEEE80211_DEV(hw, &pdev->dev);
+ pci_set_drvdata(pdev, hw);
+
+ sc = hw->priv;
+ sc->hw = hw;
+ sc->pdev = pdev;
+ sc->mem = mem;
+ sc->bus_ops = &ath_pci_bus_ops;
+
+ if (ath_attach(id->device, sc) != 0) {
+ ret = -ENODEV;
+ goto bad3;
+ }
+
+ /* setup interrupt service routine */
+
+ if (request_irq(pdev->irq, ath_isr, IRQF_SHARED, "ath", sc)) {
+ printk(KERN_ERR "%s: request_irq failed\n",
+ wiphy_name(hw->wiphy));
+ ret = -EIO;
+ goto bad4;
+ }
+
+ ah = sc->sc_ah;
+ printk(KERN_INFO
+ "%s: Atheros AR%s MAC/BB Rev:%x "
+ "AR%s RF Rev:%x: mem=0x%lx, irq=%d\n",
+ wiphy_name(hw->wiphy),
+ ath_mac_bb_name(ah->ah_macVersion),
+ ah->ah_macRev,
+ ath_rf_name((ah->ah_analog5GhzRev & AR_RADIO_SREV_MAJOR)),
+ ah->ah_phyRev,
+ (unsigned long)mem, pdev->irq);
+
+ return 0;
+bad4:
+ ath_detach(sc);
+bad3:
+ ieee80211_free_hw(hw);
+bad2:
+ pci_iounmap(pdev, mem);
+bad1:
+ pci_release_region(pdev, 0);
+bad:
+ pci_disable_device(pdev);
+ return ret;
+}
+
+static void ath_pci_remove(struct pci_dev *pdev)
+{
+ struct ieee80211_hw *hw = pci_get_drvdata(pdev);
+ struct ath_softc *sc = hw->priv;
+
+ ath_pci_cleanup(sc);
+}
+
+#ifdef CONFIG_PM
+
+static int ath_pci_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ struct ieee80211_hw *hw = pci_get_drvdata(pdev);
+ struct ath_softc *sc = hw->priv;
+
+ ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1);
+
+#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
+ if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_RFSILENT)
+ cancel_delayed_work_sync(&sc->rf_kill.rfkill_poll);
+#endif
+
+ pci_save_state(pdev);
+ pci_disable_device(pdev);
+ pci_set_power_state(pdev, 3);
+
+ return 0;
+}
+
+static int ath_pci_resume(struct pci_dev *pdev)
+{
+ struct ieee80211_hw *hw = pci_get_drvdata(pdev);
+ struct ath_softc *sc = hw->priv;
+ u32 val;
+ int err;
+
+ err = pci_enable_device(pdev);
+ if (err)
+ return err;
+ pci_restore_state(pdev);
+ /*
+ * Suspend/Resume resets the PCI configuration space, so we have to
+ * re-disable the RETRY_TIMEOUT register (0x41) to keep
+ * PCI Tx retries from interfering with C3 CPU state
+ */
+ pci_read_config_dword(pdev, 0x40, &val);
+ if ((val & 0x0000ff00) != 0)
+ pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
+
+ /* Enable LED */
+ ath9k_hw_cfg_output(sc->sc_ah, ATH_LED_PIN,
+ AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
+ ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1);
+
+#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
+ /*
+ * check the h/w rfkill state on resume
+ * and start the rfkill poll timer
+ */
+ if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_RFSILENT)
+ queue_delayed_work(sc->hw->workqueue,
+ &sc->rf_kill.rfkill_poll, 0);
+#endif
+
+ return 0;
+}
+
+#endif /* CONFIG_PM */
+
+MODULE_DEVICE_TABLE(pci, ath_pci_id_table);
+
+static struct pci_driver ath_pci_driver = {
+ .name = "ath9k",
+ .id_table = ath_pci_id_table,
+ .probe = ath_pci_probe,
+ .remove = ath_pci_remove,
+#ifdef CONFIG_PM
+ .suspend = ath_pci_suspend,
+ .resume = ath_pci_resume,
+#endif /* CONFIG_PM */
+};
+
+int __init ath_pci_init(void)
+{
+ return pci_register_driver(&ath_pci_driver);
+}
+
+void ath_pci_exit(void)
+{
+ pci_unregister_driver(&ath_pci_driver);
+}
--
1.5.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
