rtw_mac_power_switch() checks bit 8 of REG_SYS_STATUS1 to see if the chip is powered on. This bit appears to be always on in the RTL8814AU, so ignore it. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@xxxxxxxxx> --- drivers/net/wireless/realtek/rtw88/mac.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/realtek/rtw88/mac.c b/drivers/net/wireless/realtek/rtw88/mac.c index 63edf6461de8..5de16c75adf2 100644 --- a/drivers/net/wireless/realtek/rtw88/mac.c +++ b/drivers/net/wireless/realtek/rtw88/mac.c @@ -291,7 +291,8 @@ static int rtw_mac_power_switch(struct rtw_dev *rtwdev, bool pwr_on) if (rtw_read8(rtwdev, REG_CR) == 0xea) cur_pwr = false; else if (rtw_hci_type(rtwdev) == RTW_HCI_TYPE_USB && - (rtw_read8(rtwdev, REG_SYS_STATUS1 + 1) & BIT(0))) + chip->id != RTW_CHIP_TYPE_8814A && + (rtw_read8(rtwdev, REG_SYS_STATUS1 + 1) & BIT(0))) cur_pwr = false; else cur_pwr = true; -- 2.48.1
