On 2/4/25 02:56, Balamurugan Mahalingam wrote:
For MLO netdevice, the broadcast frame should be transmitted with the same sequence number on all the links. Per IEEE 802.11be-2024 section 10.3.2.14.2 "Transmitter requirements", An AP MLD shall use SNS11 in Table 10-5 (Transmitter sequence number spaces) maintained by the MLD to determine the sequence number of a group addressed data frame that is transmitted by an AP affiliated with the AP MLD so that the same group addressed Data frame transmitted over multiple links by the AP MLD uses the same sequence number for transmission on each link. Currently the MLO multicast handling is done in the mac80211 layer. Enable support for handling MLO Multicast in the driver to update the hardware descriptors in a custom way to handle the multicast frames. Firmware expects the MLO multicast frames to the submitted to the hardware with special vdev_id (actual vdev_id + 128) to recognize it as a host inspected frame to avoid using the reinjected path and it also uses the multicast global sequence number (GSN) provided by the host in the HTT metadata to process and transmit it with the same sequence number. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Balamurugan Mahalingam<quic_bmahalin@xxxxxxxxxxx> ---
Reviewed-by: Aditya Kumar Singh <aditya.kumar.singh@xxxxxxxxxxxxxxxx> -- Aditya
