From: Saravanakumar Duraisamy <quic_saradura@xxxxxxxxxxx>
Add ath12k_hw_params for the new ath12k AHB-based WiFi device IPQ5424.
The WiFi device IPQ5424 is similar to IPQ5332. Most of the hardware
parameters like hw_ops, wmi_init, hal_ops, etc., are the same between
IPQ5424 and IPQ5332, hence use these same parameters for IPQ5424.
Some parameters are specific to IPQ5424; initially set these to
0 or NULL, and populate them in subsequent patches.
Tested-on: IPQ5424 hw1.0 AHB WLAN.WBE.1.5-01053-QCAHKSWPL_SILICONZ-1
Tested-on: IPQ5332 hw1.0 AHB WLAN.WBE.1.3.1-00130-QCAHKSWPL_SILICONZ-1
Signed-off-by: Saravanakumar Duraisamy <quic_saradura@xxxxxxxxxxx>
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@xxxxxxxxxxx>
---
drivers/net/wireless/ath/ath12k/core.h | 1 +
drivers/net/wireless/ath/ath12k/hw.c | 76 ++++++++++++++++++++++++++
2 files changed, 77 insertions(+)
diff --git a/drivers/net/wireless/ath/ath12k/core.h b/drivers/net/wireless/ath/ath12k/core.h
index 297e01d191ab..13db19dc50cd 100644
--- a/drivers/net/wireless/ath/ath12k/core.h
+++ b/drivers/net/wireless/ath/ath12k/core.h
@@ -150,6 +150,7 @@ enum ath12k_hw_rev {
ATH12K_HW_QCN9274_HW20,
ATH12K_HW_WCN7850_HW20,
ATH12K_HW_IPQ5332_HW10,
+ ATH12K_HW_IPQ5424_HW10,
};
enum ath12k_firmware_mode {
diff --git a/drivers/net/wireless/ath/ath12k/hw.c b/drivers/net/wireless/ath/ath12k/hw.c
index b4d5651973b7..b8021dc3ba01 100644
--- a/drivers/net/wireless/ath/ath12k/hw.c
+++ b/drivers/net/wireless/ath/ath12k/hw.c
@@ -1566,6 +1566,82 @@ static const struct ath12k_hw_params ath12k_hw_params[] = {
.ce_remap = &ath12k_ce_remap_ipq5332,
.bdf_addr_offset = 0xC00000,
},
+ {
+ .name = "ipq5424 hw1.0",
+ .hw_rev = ATH12K_HW_IPQ5424_HW10,
+ .fw = {
+ .dir = "IPQ5424/hw1.0",
+ .board_size = 256 * 1024,
+ .cal_offset = 128 * 1024,
+ .m3_loader = ath12k_m3_fw_loader_remoteproc,
+ },
+ .max_radios = 1,
+ .single_pdev_only = false,
+ .qmi_service_ins_id = ATH12K_QMI_WLFW_SERVICE_INS_ID_V01_IPQ5332,
+ .internal_sleep_clock = false,
+
+ .hw_ops = &qcn9274_ops,
+ .regs = NULL,
+ .ring_mask = &ath12k_hw_ring_mask_ipq5332,
+
+ .host_ce_config = ath12k_host_ce_config_ipq5332,
+ .ce_count = 12,
+ .target_ce_config = ath12k_target_ce_config_wlan_ipq5332,
+ .target_ce_count = 12,
+ .svc_to_ce_map = ath12k_target_service_to_ce_map_wlan_ipq5332,
+ .svc_to_ce_map_len = 18,
+
+ .hal_params = &ath12k_hw_hal_params_ipq5332,
+
+ .rxdma1_enable = false,
+ .num_rxdma_per_pdev = 1,
+ .num_rxdma_dst_ring = 0,
+ .rx_mac_buf_ring = false,
+ .vdev_start_delay = false,
+
+ .interface_modes = BIT(NL80211_IFTYPE_STATION) |
+ BIT(NL80211_IFTYPE_AP) |
+ BIT(NL80211_IFTYPE_MESH_POINT),
+ .supports_monitor = false,
+
+ .idle_ps = false,
+ .download_calib = true,
+ .supports_suspend = false,
+ .tcl_ring_retry = true,
+ .reoq_lut_support = false,
+ .supports_shadow_regs = false,
+
+ .num_tcl_banks = 48,
+ .max_tx_ring = 4,
+
+ .wmi_init = &ath12k_wmi_init_qcn9274,
+
+ .hal_ops = &hal_qcn9274_ops,
+
+ .qmi_cnss_feature_bitmap = BIT(CNSS_QDSS_CFG_MISS_V01),
+
+ .rfkill_pin = 0,
+ .rfkill_cfg = 0,
+ .rfkill_on_level = 0,
+
+ .rddm_size = 0,
+
+ .def_num_link = 0,
+ .max_mlo_peer = 256,
+
+ .otp_board_id_register = 0,
+
+ .supports_sta_ps = false,
+
+ .acpi_guid = NULL,
+ .supports_dynamic_smps_6ghz = false,
+ .iova_mask = 0,
+ .supports_aspm = false,
+
+ .ce_ie_addr = NULL,
+ .ce_remap = NULL,
+ .bdf_addr_offset = 0x940000,
+ },
};
int ath12k_hw_init(struct ath12k_base *ab)
--
2.34.1
