Since inception there is an obvious typo laying around in
ath12k_hal_tx_cmd_ext_desc_setup(). Instead of intitializing + adding
flags to tcl_ext_cmd->info1, we initialize + override. This will be needed
in the future to make broadcast frames work with ethernet encapsulation.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Signed-off-by: Nicolas Escande <nico.escande@xxxxxxxxx>
---
v2:
- removed spurious 'fbx' from title
- removed fixes tag as the problem it fixes is not yet enabled mainstream
see https://lore.kernel.org/linux-wireless/23d62bef-2393-4232-93ff-82ca4dbc4524@xxxxxxxxxxxxxxxx/
v1:
- initial version
---
drivers/net/wireless/ath/ath12k/dp_tx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath12k/dp_tx.c b/drivers/net/wireless/ath/ath12k/dp_tx.c
index e0b85f959cd4a..00437736e0322 100644
--- a/drivers/net/wireless/ath/ath12k/dp_tx.c
+++ b/drivers/net/wireless/ath/ath12k/dp_tx.c
@@ -117,7 +117,7 @@ static void ath12k_hal_tx_cmd_ext_desc_setup(struct ath12k_base *ab,
le32_encode_bits(ti->data_len,
HAL_TX_MSDU_EXT_INFO1_BUF_LEN);
- tcl_ext_cmd->info1 = le32_encode_bits(1, HAL_TX_MSDU_EXT_INFO1_EXTN_OVERRIDE) |
+ tcl_ext_cmd->info1 |= le32_encode_bits(1, HAL_TX_MSDU_EXT_INFO1_EXTN_OVERRIDE) |
le32_encode_bits(ti->encap_type,
HAL_TX_MSDU_EXT_INFO1_ENCAP_TYPE) |
le32_encode_bits(ti->encrypt_type,
--
2.48.1
