The existing code is suitable for chips with up to 2 spatial streams.
Inform the firmware about the rates it's allowed to use when
transmitting 3 spatial streams.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@xxxxxxxxx>
---
drivers/net/wireless/realtek/rtw88/fw.c | 14 ++++++++++++++
drivers/net/wireless/realtek/rtw88/fw.h | 1 +
2 files changed, 15 insertions(+)
diff --git a/drivers/net/wireless/realtek/rtw88/fw.c b/drivers/net/wireless/realtek/rtw88/fw.c
index 02389b7c6876..0ca1b139110d 100644
--- a/drivers/net/wireless/realtek/rtw88/fw.c
+++ b/drivers/net/wireless/realtek/rtw88/fw.c
@@ -735,6 +735,7 @@ void rtw_fw_send_ra_info(struct rtw_dev *rtwdev, struct rtw_sta_info *si,
{
u8 h2c_pkt[H2C_PKT_SIZE] = {0};
bool disable_pt = true;
+ u32 mask_hi;
SET_H2C_CMD_ID_CLASS(h2c_pkt, H2C_CMD_RA_INFO);
@@ -755,6 +756,19 @@ void rtw_fw_send_ra_info(struct rtw_dev *rtwdev, struct rtw_sta_info *si,
si->init_ra_lv = 0;
rtw_fw_send_h2c_command(rtwdev, h2c_pkt);
+
+ if (rtwdev->chip->rf_tbl[RF_PATH_C]) {
+ SET_H2C_CMD_ID_CLASS(h2c_pkt, H2C_CMD_RA_INFO_HI);
+
+ mask_hi = si->ra_mask >> 32;
+
+ SET_RA_INFO_RA_MASK0(h2c_pkt, (mask_hi & 0xff));
+ SET_RA_INFO_RA_MASK1(h2c_pkt, (mask_hi & 0xff00) >> 8);
+ SET_RA_INFO_RA_MASK2(h2c_pkt, (mask_hi & 0xff0000) >> 16);
+ SET_RA_INFO_RA_MASK3(h2c_pkt, (mask_hi & 0xff000000) >> 24);
+
+ rtw_fw_send_h2c_command(rtwdev, h2c_pkt);
+ }
}
void rtw_fw_media_status_report(struct rtw_dev *rtwdev, u8 mac_id, bool connect)
diff --git a/drivers/net/wireless/realtek/rtw88/fw.h b/drivers/net/wireless/realtek/rtw88/fw.h
index 404de1b0c407..48ad9ceab6ea 100644
--- a/drivers/net/wireless/realtek/rtw88/fw.h
+++ b/drivers/net/wireless/realtek/rtw88/fw.h
@@ -557,6 +557,7 @@ static inline void rtw_h2c_pkt_set_header(u8 *h2c_pkt, u8 sub_id)
#define H2C_CMD_DEFAULT_PORT 0x2c
#define H2C_CMD_RA_INFO 0x40
#define H2C_CMD_RSSI_MONITOR 0x42
+#define H2C_CMD_RA_INFO_HI 0x46
#define H2C_CMD_BCN_FILTER_OFFLOAD_P0 0x56
#define H2C_CMD_BCN_FILTER_OFFLOAD_P1 0x57
#define H2C_CMD_WL_PHY_INFO 0x58
--
2.48.1
