Search Linux Wireless

[PATCH 1/2] wifi: rtw88: Don't use static local variable in rtw8822b_set_tx_power_index_by_rate

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Some users want to plug two identical USB devices at the same time.
This static variable could theoretically cause them to use incorrect
TX power values.

Move the variable to the caller and pass a pointer to it to
rtw8822b_set_tx_power_index_by_rate().

Signed-off-by: Bitterblue Smith <rtl8821cerfe2@xxxxxxxxx>
---
 drivers/net/wireless/realtek/rtw88/rtw8822b.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtw88/rtw8822b.c b/drivers/net/wireless/realtek/rtw88/rtw8822b.c
index 7f03903ddf4b..23a29019752d 100644
--- a/drivers/net/wireless/realtek/rtw88/rtw8822b.c
+++ b/drivers/net/wireless/realtek/rtw88/rtw8822b.c
@@ -935,11 +935,11 @@ static void query_phy_status(struct rtw_dev *rtwdev, u8 *phy_status,
 }
 
 static void
-rtw8822b_set_tx_power_index_by_rate(struct rtw_dev *rtwdev, u8 path, u8 rs)
+rtw8822b_set_tx_power_index_by_rate(struct rtw_dev *rtwdev, u8 path,
+				    u8 rs, u32 *phy_pwr_idx)
 {
 	struct rtw_hal *hal = &rtwdev->hal;
 	static const u32 offset_txagc[2] = {0x1d00, 0x1d80};
-	static u32 phy_pwr_idx;
 	u8 rate, rate_idx, pwr_index, shift;
 	int j;
 
@@ -947,12 +947,12 @@ rtw8822b_set_tx_power_index_by_rate(struct rtw_dev *rtwdev, u8 path, u8 rs)
 		rate = rtw_rate_section[rs][j];
 		pwr_index = hal->tx_pwr_tbl[path][rate];
 		shift = rate & 0x3;
-		phy_pwr_idx |= ((u32)pwr_index << (shift * 8));
+		*phy_pwr_idx |= ((u32)pwr_index << (shift * 8));
 		if (shift == 0x3) {
 			rate_idx = rate & 0xfc;
 			rtw_write32(rtwdev, offset_txagc[path] + rate_idx,
-				    phy_pwr_idx);
-			phy_pwr_idx = 0;
+				    *phy_pwr_idx);
+			*phy_pwr_idx = 0;
 		}
 	}
 }
@@ -960,11 +960,13 @@ rtw8822b_set_tx_power_index_by_rate(struct rtw_dev *rtwdev, u8 path, u8 rs)
 static void rtw8822b_set_tx_power_index(struct rtw_dev *rtwdev)
 {
 	struct rtw_hal *hal = &rtwdev->hal;
+	u32 phy_pwr_idx = 0;
 	int rs, path;
 
 	for (path = 0; path < hal->rf_path_num; path++) {
 		for (rs = 0; rs < RTW_RATE_SECTION_MAX; rs++)
-			rtw8822b_set_tx_power_index_by_rate(rtwdev, path, rs);
+			rtw8822b_set_tx_power_index_by_rate(rtwdev, path, rs,
+							    &phy_pwr_idx);
 	}
 }
 
-- 
2.48.1





[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux