On 1/25/25 00:23, Ramya Gnanasekar wrote:
Add support to request and print vdev stats from firmware through WMI.
Sample output:
-------------
cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/fw_stats/vdev_stats
ath12k VDEV stats
=================
VDEV ID 0
VDEV MAC address 00:03:7f:6c:9c:1a
beacon snr 96
data snr 255
num rx frames 0
num rts fail 0
num rts success 0
num rx err 0
num rx discard 0
num tx not acked 0
num tx frames [00] 0
num tx frames [01] 0
num tx frames [02] 0
num tx frames [03] 2
num tx frames retries [00] 0
num tx frames retries [01] 0
num tx frames retries [02] 0
num tx frames retries [03] 0
num tx frames failures [00] 0
num tx frames failures [01] 0
num tx frames failures [02] 0
num tx frames failures [03] 0
tx rate history [00] 0x00000000
tx rate history [01] 0x00000000
tx rate history [02] 0x00000000
tx rate history [03] 0x00000000
tx rate history [04] 0x00000000
tx rate history [05] 0x00000000
tx rate history [06] 0x00000000
tx rate history [07] 0x00000000
tx rate history [08] 0x00000000
tx rate history [09] 0x00000000
beacon rssi history [00] 0
beacon rssi history [01] 0
beacon rssi history [02] 0
beacon rssi history [03] 0
beacon rssi history [04] 0
beacon rssi history [05] 0
beacon rssi history [06] 0
beacon rssi history [07] 0
beacon rssi history [08] 0
beacon rssi history [09] 0
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Ramya Gnanasekar<ramya.gnanasekar@xxxxxxxxxxxxxxxx>
---
Reviewed-by: Aditya Kumar Singh <aditya.kumar.singh@xxxxxxxxxxxxxxxx>
--
Aditya
