Search Linux Wireless

Re: [PATCH] wifi: brcmfmac: use random seed flag for BCM4355 and BCM4364 firmware

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Arend Van Spriel <arend.vanspriel@xxxxxxxxxxxx> writes:

> On January 20, 2025 5:50:56 PM Aditya Garg <gargaditya08@xxxxxxxx> wrote:
>
>> From: Aditya Garg <gargaditya08@xxxxxxxx>
>>
>> Before 6.13, random seed to the firmware was given based on the logic
>> whether the device had valid OTP or not, and such devices were found
>> mainly on the T2 and Apple Silicon Macs. In 6.13, the logic was changed,
>> and the device table was used for this purpose, so as to cover the special
>> case of BCM43752 chip.
>>
>> During the transition, the device table for BCM4364 and BCM4355 Wi-Fi chips
>> which had valid OTP was not modified, thus breaking Wi-Fi on these devices.
>> This patch adds does the necessary changes, similar to the ones done for
>> other chips.
>>
>> Fixes: ea11a89c3ac6 ("wifi: brcmfmac: add flag for random seed
>> during firmware download")
>> Cc: stable@xxxxxxxxxxxxxxx
>
> Acked-by: Arend van Spriel  <arend.vanspriel@xxxxxxxxxxxx>

I'll queue this to wireless tree for v6.14.

-- 
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux