On 1/8/2025 8:25 PM, Aditya Kumar Singh wrote:
> At present, during PCI shutdown, the power down is only executed for a
> single device. However, when operating in a group, all devices need to be
> powered down simultaneously. Failure to do so will result in a firmware
> assertion.
>
> Hence, introduce a new ath12k_pci_hw_group_power_down() and call it during
> power down. This will ensure that all partner devices are properly powered
> down.
>
> Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
>
> Signed-off-by: Aditya Kumar Singh <quic_adisi@xxxxxxxxxxx>
> ---
> drivers/net/wireless/ath/ath12k/pci.c | 23 ++++++++++++++++++++++-
> 1 file changed, 22 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/wireless/ath/ath12k/pci.c b/drivers/net/wireless/ath/ath12k/pci.c
> index 837be309cd45a2d037ee8c3bba8f7be0f457d6b2..7f6521a56ffc0f1e9687c94d6829a9c1f1887661 100644
> --- a/drivers/net/wireless/ath/ath12k/pci.c
> +++ b/drivers/net/wireless/ath/ath12k/pci.c
> @@ -1751,13 +1751,34 @@ static void ath12k_pci_remove(struct pci_dev *pdev)
> ath12k_core_free(ab);
> }
>
> +static void ath12k_pci_hw_group_power_down(struct ath12k_hw_group *ag)
don't you end up calling this for every device in the group?
what prevents ath12k_pci_power_down(ab, false) from being called multiple
times for the same ab?
> +{
> + struct ath12k_base *ab;
> + int i;
> +
> + if (!ag)
> + return;
> +
> + mutex_lock(&ag->mutex);
> +
> + for (i = 0; i < ag->num_devices; i++) {
> + ab = ag->ab[i];
> + if (!ab)
> + continue;
> +
> + ath12k_pci_power_down(ab, false);
> + }
> +
> + mutex_unlock(&ag->mutex);
> +}
> +
> static void ath12k_pci_shutdown(struct pci_dev *pdev)
> {
> struct ath12k_base *ab = pci_get_drvdata(pdev);
> struct ath12k_pci *ab_pci = ath12k_pci_priv(ab);
>
> ath12k_pci_set_irq_affinity_hint(ab_pci, NULL);
> - ath12k_pci_power_down(ab, false);
> + ath12k_pci_hw_group_power_down(ab->ag);
> }
>
> static __maybe_unused int ath12k_pci_pm_suspend(struct device *dev)
>
