On 1/8/2025 8:55 PM, Aditya Kumar Singh wrote:
> On 1/9/25 10:13, Aaradhana Sahu wrote:
>>
>>
>> On 6/24/2024 3:23 PM, Aaradhana Sahu wrote:
>>> Device is booted in factory test mode for calibration.
>>> The commands are sent from userspace application, which
>>> is sent to firmware using wmi commands. Firmware sends
>>> the response to driver as wmi events and driver sends
>>> these events to the application via netlink message.
>>>
>>> Also added changes related to correct pdev id access for
>>> fw test cmd.
>>>
>>> Aaradhana Sahu (3):
>>> wifi: ath: create common testmode_i.h file for ath drivers
>>> wifi: ath12k: export ath12k_wmi_tlv_hdr for testmode
>>> wifi: ath12k: add factory test mode support
>>>
>>> Rajat Soni (1):
>>> wifi: ath12k: Fill pdev id for fw test cmd
>>>
>>> ---
>>> v5:
>>> -Updated copyright
>>> -Fixed line length within 90 char
>>> v4:
>>> -Rebased on latest ToT
>>> v3:
>>> -Rebased on latest ToT
>>> -Updated Tested-on Tag
>>> -Removed second parameter of ath12k_core_start()
>>> -Updated copyright
>>> v2:
>>> -Rebased on latest ath ToT
>>> ---
>>>
>>> drivers/net/wireless/ath/ath11k/testmode.c | 78 ++--
>>> drivers/net/wireless/ath/ath12k/Makefile | 1 +
>>> drivers/net/wireless/ath/ath12k/core.c | 22 +-
>>> drivers/net/wireless/ath/ath12k/core.h | 13 +
>>> drivers/net/wireless/ath/ath12k/debug.h | 1 +
>>> drivers/net/wireless/ath/ath12k/dp.c | 3 +
>>> drivers/net/wireless/ath/ath12k/mac.c | 15 +-
>>> drivers/net/wireless/ath/ath12k/pci.c | 1 +
>>> drivers/net/wireless/ath/ath12k/testmode.c | 423 ++++++++++++++++++
>>> drivers/net/wireless/ath/ath12k/testmode.h | 40 ++
>>> drivers/net/wireless/ath/ath12k/wmi.c | 39 +-
>>> drivers/net/wireless/ath/ath12k/wmi.h | 21 +
>>> .../wireless/ath/{ath11k => }/testmode_i.h | 54 +--
>>> 13 files changed, 636 insertions(+), 75 deletions(-)
>>> create mode 100644 drivers/net/wireless/ath/ath12k/testmode.c
>>> create mode 100644 drivers/net/wireless/ath/ath12k/testmode.h
>>> rename drivers/net/wireless/ath/{ath11k => }/testmode_i.h (50%)
>>>
>>>
>>> base-commit: cac9bfd02678adbcca9a7dce770609b9f7434d37
>>
>> Hi Kalle,
>>
>> Please let me know, if any thing is pending from the developer side, to merge this series into ath.git tree.
>
> This series does not apply cleanly on latest tip. And base commit is
> around 6 months old. So may be you would want to rebase and send a new
> version?
>
> Applying: wifi: ath: create common testmode_i.h file for ath drivers
> Applying: wifi: ath12k: export ath12k_wmi_tlv_hdr for testmode
> Applying: wifi: ath12k: add factory test mode support
> error: patch failed: drivers/net/wireless/ath/ath12k/Makefile:26
> error: drivers/net/wireless/ath/ath12k/Makefile: patch does not apply
> error: patch failed: drivers/net/wireless/ath/ath12k/core.c:42
> error: drivers/net/wireless/ath/ath12k/core.c: patch does not apply
> error: patch failed: drivers/net/wireless/ath/ath12k/core.h:209
> error: drivers/net/wireless/ath/ath12k/core.h: patch does not apply
> error: patch failed: drivers/net/wireless/ath/ath12k/debug.h:33
> error: drivers/net/wireless/ath/ath12k/debug.h: patch does not apply
> error: patch failed: drivers/net/wireless/ath/ath12k/mac.c:13
> error: drivers/net/wireless/ath/ath12k/mac.c: patch does not apply
> error: patch failed: drivers/net/wireless/ath/ath12k/wmi.c:7150
> error: drivers/net/wireless/ath/ath12k/wmi.c: patch does not apply
> Patch failed at 0003 wifi: ath12k: add factory test mode support
> hint: Use 'git am --show-current-patch=diff' to see the failed patch
> When you have resolved this problem, run "git am --continue".
> If you prefer to skip this patch, run "git am --skip" instead.
> To restore the original branch and stop patching, run "git am --abort".
>
> And since you'll be submitting in 2025, don't forget to update
> copyrights.
>
>
Make sure to review all the changes that Kalle made locally to the pending
version and incorporate those.
/jeff
