Search Linux Wireless

[PATCH 09/10] wifi: ath12k: handle ath12k_core_reset() with hardware grouping

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Currently, in ath12k_core_reset(), the device is powered up immediately
after a power down. However, with hardware grouping, when one device
asserts, all partner devices also asserts. If there is a delay in
processing these asserts, by the time this device powers up, other devices
might still be asserting, leading to an overall recovery failure.

To prevent this issue, ensure all asserts for a group are processed before
initiating the power-up sequence.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1

Signed-off-by: Aditya Kumar Singh <quic_adisi@xxxxxxxxxxx>
---
 drivers/net/wireless/ath/ath12k/core.c | 30 +++++++++++++++++++++++++++---
 1 file changed, 27 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/ath12k/core.c b/drivers/net/wireless/ath/ath12k/core.c
index 0a9e35695f760799273eeba32b889375232eedc0..ce261151f5b887656f9582e3337a2d5e5236bbc1 100644
--- a/drivers/net/wireless/ath/ath12k/core.c
+++ b/drivers/net/wireless/ath/ath12k/core.c
@@ -1416,7 +1416,8 @@ static void ath12k_core_restart(struct work_struct *work)
 static void ath12k_core_reset(struct work_struct *work)
 {
 	struct ath12k_base *ab = container_of(work, struct ath12k_base, reset_work);
-	int reset_count, fail_cont_count;
+	struct ath12k_hw_group *ag = ab->ag;
+	int reset_count, fail_cont_count, i;
 	long time_left;
 
 	if (!(test_bit(ATH12K_FLAG_QMI_FW_READY_COMPLETE, &ab->dev_flags))) {
@@ -1475,9 +1476,32 @@ static void ath12k_core_reset(struct work_struct *work)
 	ath12k_hif_ce_irq_disable(ab);
 
 	ath12k_hif_power_down(ab, false);
-	ath12k_hif_power_up(ab);
 
-	ath12k_dbg(ab, ATH12K_DBG_BOOT, "reset started\n");
+	/* prepare for power up */
+	ab->qmi.num_radios = U8_MAX;
+	ab->single_chip_mlo_supp = false;
+
+	mutex_lock(&ag->mutex);
+	ath12k_core_to_group_ref_put(ab);
+
+	if (ag->num_started > 0) {
+		ath12k_dbg(ab, ATH12K_DBG_BOOT,
+			   "waiting for %d partner device(s) to reset\n",
+			   ag->num_started);
+		mutex_unlock(&ag->mutex);
+		return;
+	}
+
+	for (i = 0; i < ag->num_devices; i++) {
+		ab = ag->ab[i];
+		if (!ab)
+			continue;
+
+		ath12k_hif_power_up(ab);
+		ath12k_dbg(ab, ATH12K_DBG_BOOT, "reset started\n");
+	}
+
+	mutex_unlock(&ag->mutex);
 }
 
 int ath12k_core_pre_init(struct ath12k_base *ab)

-- 
2.34.1





[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux