On 12/25/2024 3:23 AM, Lingbo Kong wrote: > Currently, the transmit rate, the receive rate and signal strength of "iw > dev xxx station dump" always show an invalid value. > > This is because ath12k has no logic to handle this relevant information. > > To solve this issue, ath12k parses the information passed by the firmware > and passes it to mac80211. > > After that, "iw dev xxx station dump" show the correct value. > Such as: > > Station 00:03:7f:12:03:03 (on wlo1) > inactive time: 600 ms > rx bytes: 4642228 > rx packets: 23796 > tx bytes: 933967 > tx packets: 8761 > tx retries: 66 > tx failed: 0 > beacon loss: 0 > beacon rx: 8925 > rx drop misc: 191 > signal: -20 dBm > beacon signal avg: -18 dBm > tx bitrate: 1441.1 MBit/s 80MHz EHT-MCS 13 EHT-NSS 2 EHT-GI 0 > tx duration: 0 us > rx bitrate: 1801.4 MBit/s 80MHz EHT-MCS 11 EHT-NSS 3 EHT-GI 0 > rx duration: 0 us > > v8: > 1.rebase to 09fa3b6974a1 Unfortunately this series conflicts with current ath/main, so you need to rebase again. And since you'll be submitting in 2025, don't forget to update copyrights. /jeff
