Search Linux Wireless

[PATCH v6 2/3] wifi: ath12k: properly handling the state variables of monitor mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Now monitor mode has some status variables, such as monitor_started,
monitor_vdev_created. They are not always handled correctly.

For monitor_started, it should be true when driver works in monitor
mode, and should be false at other times.

For monitor_vdev_id, it should be -1 when driver doesn't work in monitor
mode.

For monitor_vdev_created, it should be true after monitor vdev is
created successfully and should be false at other times.

For monitor_conf_enabled, it should be true when mac80211 sets
IEEE80211_CONF_MONITOR, and should be false at other times.

Handle those state variables according to above descriptions.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

Signed-off-by: Kang Yang <quic_kangyang@xxxxxxxxxxx>
---
 drivers/net/wireless/ath/ath12k/core.c |  7 ++++++-
 drivers/net/wireless/ath/ath12k/mac.c  | 13 ++++++++++++-
 2 files changed, 18 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath12k/core.c b/drivers/net/wireless/ath/ath12k/core.c
index 0c6b35aac96e..15c8a8dc0133 100644
--- a/drivers/net/wireless/ath/ath12k/core.c
+++ b/drivers/net/wireless/ath/ath12k/core.c
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: BSD-3-Clause-Clear
 /*
  * Copyright (c) 2018-2021 The Linux Foundation. All rights reserved.
- * Copyright (c) 2021-2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2021-2025 Qualcomm Innovation Center, Inc. All rights reserved.
  */
 
 #include <linux/module.h>
@@ -1261,6 +1261,11 @@ static void ath12k_core_pre_reconfigure_recovery(struct ath12k_base *ab)
 				     ath12k_mac_tx_mgmt_pending_free, ar);
 			idr_destroy(&ar->txmgmt_idr);
 			wake_up(&ar->txmgmt_empty_waitq);
+
+			ar->monitor_vdev_id = -1;
+			ar->monitor_started = false;
+			ar->monitor_vdev_created = false;
+			ar->monitor_conf_enabled = false;
 		}
 	}
 
diff --git a/drivers/net/wireless/ath/ath12k/mac.c b/drivers/net/wireless/ath/ath12k/mac.c
index 6f10813d9378..3c4ca240a15d 100644
--- a/drivers/net/wireless/ath/ath12k/mac.c
+++ b/drivers/net/wireless/ath/ath12k/mac.c
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: BSD-3-Clause-Clear
 /*
  * Copyright (c) 2018-2021 The Linux Foundation. All rights reserved.
- * Copyright (c) 2021-2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2021-2025 Qualcomm Innovation Center, Inc. All rights reserved.
  */
 
 #include <net/mac80211.h>
@@ -7947,6 +7947,9 @@ int ath12k_mac_vdev_create(struct ath12k *ar, struct ath12k_link_vif *arvif)
 			goto err_peer_del;
 		}
 		break;
+	case WMI_VDEV_TYPE_MONITOR:
+		ar->monitor_vdev_created = true;
+		break;
 	default:
 		break;
 	}
@@ -7993,6 +7996,10 @@ int ath12k_mac_vdev_create(struct ath12k *ar, struct ath12k_link_vif *arvif)
 
 err_vdev_del:
 	ath12k_wmi_vdev_delete(ar, arvif->vdev_id);
+	if (ahvif->vdev_type == WMI_VDEV_TYPE_MONITOR) {
+		ar->monitor_vdev_created = false;
+		ar->monitor_vdev_id = -1;
+	}
 	ar->num_created_vdevs--;
 	arvif->is_created = false;
 	arvif->ar = NULL;
@@ -11057,6 +11064,10 @@ static void ath12k_mac_setup(struct ath12k *ar)
 	ar->num_tx_chains = hweight32(pdev->cap.tx_chain_mask);
 	ar->num_rx_chains = hweight32(pdev->cap.rx_chain_mask);
 	ar->scan.arvif = NULL;
+	ar->monitor_vdev_id = -1;
+	ar->monitor_started = false;
+	ar->monitor_vdev_created = false;
+	ar->monitor_conf_enabled = false;
 
 	spin_lock_init(&ar->data_lock);
 	INIT_LIST_HEAD(&ar->arvifs);
-- 
2.34.1





[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux