Search Linux Wireless

[PATCH v2 05/10] wifi: ath12k: Update the peer id in PPDU end user stats TLV

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Currently, peer id get reported in the PPDU end user TLV tag. But the
monitor status handler is inherited from ath11k, but it was not updated
to incorporate the changes made to ath12k 802.11be hardware architecture.
Therefore, update the peer id from the PPDU end user TLV data to get latest
peer id update, it helps to populate accurate peer information on the
statistics data.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

Co-developed-by: P Praneesh <quic_ppranees@xxxxxxxxxxx>
Signed-off-by: P Praneesh <quic_ppranees@xxxxxxxxxxx>
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@xxxxxxxxxxx>
---
 drivers/net/wireless/ath/ath12k/dp_mon.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/wireless/ath/ath12k/dp_mon.c b/drivers/net/wireless/ath/ath12k/dp_mon.c
index 8ded73d87c73..8c283e7c7dde 100644
--- a/drivers/net/wireless/ath/ath12k/dp_mon.c
+++ b/drivers/net/wireless/ath/ath12k/dp_mon.c
@@ -1535,6 +1535,9 @@ ath12k_dp_mon_rx_parse_status_tlv(struct ath12k *ar,
 		ppdu_info->num_mpdu_fcs_err =
 			u32_get_bits(info[0],
 				     HAL_RX_PPDU_END_USER_STATS_INFO0_MPDU_CNT_FCS_ERR);
+		ppdu_info->peer_id =
+			u32_get_bits(info[0], HAL_RX_PPDU_END_USER_STATS_INFO0_PEER_ID);
+
 		switch (ppdu_info->preamble_type) {
 		case HAL_RX_PREAMBLE_11N:
 			ppdu_info->ht_flags = 1;
-- 
2.34.1





[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux