[PATCH v7 3/4] wifi: ath12k: use correct WMI command to set country code for WCN7850

[Kang Yang <quic_kangyang@xxxxxxxxxxx>]

From: Wen Gong <quic_wgong@xxxxxxxxxxx>

When userspace try to set country code by NL80211_REGDOM_SET_BY_USER
hint(like iw reg set XX), it will pass new country code to ath12k.
Then ath12k will set this new country code to firmware by
WMI_SET_INIT_COUNTRY_CMDID. But for WCN7850, this WMI command won't
take effect.

For AP based chips(QCN92xx), WMI_SET_INIT_COUNTRY_CMDID is the correct
command. However, for STATION based chips(WCN7850), it need to use
WMI_SET_CURRENT_COUNTRY_CMDID.

Add flag current_cc_support in hardware parameters. It is used to
distinguish AP/STA platform. After that, the firmware will work
normal and the regulatory feature works well for WCN7850.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

Signed-off-by: Wen Gong <quic_wgong@xxxxxxxxxxx>
Signed-off-by: Kang Yang <quic_kangyang@xxxxxxxxxxx>
---
 drivers/net/wireless/ath/ath12k/hw.c  |  6 ++++++
 drivers/net/wireless/ath/ath12k/hw.h  |  1 +
 drivers/net/wireless/ath/ath12k/reg.c | 29 ++++++++++++++++-----------
 3 files changed, 24 insertions(+), 12 deletions(-)

diff --git a/drivers/net/wireless/ath/ath12k/hw.c b/drivers/net/wireless/ath/ath12k/hw.c
index b7b583fadb5a..65c52e3217c5 100644
--- a/drivers/net/wireless/ath/ath12k/hw.c
+++ b/drivers/net/wireless/ath/ath12k/hw.c
@@ -928,6 +928,8 @@ static const struct ath12k_hw_params ath12k_hw_params[] = {
 		.iova_mask = 0,
 
 		.supports_aspm = false,
+
+		.current_cc_support = false,
 	},
 	{
 		.name = "wcn7850 hw2.0",
@@ -1008,6 +1010,8 @@ static const struct ath12k_hw_params ath12k_hw_params[] = {
 		.iova_mask = ATH12K_PCIE_MAX_PAYLOAD_SIZE - 1,
 
 		.supports_aspm = true,
+
+		.current_cc_support = true,
 	},
 	{
 		.name = "qcn9274 hw2.0",
@@ -1084,6 +1088,8 @@ static const struct ath12k_hw_params ath12k_hw_params[] = {
 		.iova_mask = 0,
 
 		.supports_aspm = false,
+
+		.current_cc_support = false,
 	},
 };
 
diff --git a/drivers/net/wireless/ath/ath12k/hw.h b/drivers/net/wireless/ath/ath12k/hw.h
index 8d52182e28ae..8067b103e266 100644
--- a/drivers/net/wireless/ath/ath12k/hw.h
+++ b/drivers/net/wireless/ath/ath12k/hw.h
@@ -190,6 +190,7 @@ struct ath12k_hw_params {
 	bool reoq_lut_support:1;
 	bool supports_shadow_regs:1;
 	bool supports_aspm:1;
+	bool current_cc_support:1;
 
 	u32 num_tcl_banks;
 	u32 max_tx_ring;
diff --git a/drivers/net/wireless/ath/ath12k/reg.c b/drivers/net/wireless/ath/ath12k/reg.c
index aecfd55aef59..c7b0d66f4874 100644
--- a/drivers/net/wireless/ath/ath12k/reg.c
+++ b/drivers/net/wireless/ath/ath12k/reg.c
@@ -48,6 +48,7 @@ ath12k_reg_notifier(struct wiphy *wiphy, struct regulatory_request *request)
 {
 	struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy);
 	struct ath12k_wmi_init_country_arg arg;
+	struct wmi_set_current_country_arg current_arg = {};
 	struct ath12k_hw *ah = ath12k_hw_to_ah(hw);
 	struct ath12k *ar = ath12k_ah_to_ar(ah, 0);
 	int ret, i;
@@ -77,23 +78,27 @@ ath12k_reg_notifier(struct wiphy *wiphy, struct regulatory_request *request)
 		return;
 	}
 
-	/* Set the country code to the firmware and wait for
-	 * the WMI_REG_CHAN_LIST_CC EVENT for updating the
-	 * reg info
-	 */
-	arg.flags = ALPHA_IS_SET;
-	memcpy(&arg.cc_info.alpha2, request->alpha2, 2);
-	arg.cc_info.alpha2[2] = 0;
-
 	/* Allow fresh updates to wiphy regd */
 	ah->regd_updated = false;
 
 	/* Send the reg change request to all the radios */
 	for_each_ar(ah, ar, i) {
-		ret = ath12k_wmi_send_init_country_cmd(ar, &arg);
-		if (ret)
-			ath12k_warn(ar->ab,
-				    "INIT Country code set to fw failed : %d\n", ret);
+		if (ar->ab->hw_params->current_cc_support) {
+			memcpy(&current_arg.alpha2, request->alpha2, 2);
+			ret = ath12k_wmi_send_set_current_country_cmd(ar, &current_arg);
+			if (ret)
+				ath12k_warn(ar->ab,
+					    "failed set current country code: %d\n", ret);
+		} else {
+			arg.flags = ALPHA_IS_SET;
+			memcpy(&arg.cc_info.alpha2, request->alpha2, 2);
+			arg.cc_info.alpha2[2] = 0;
+
+			ret = ath12k_wmi_send_init_country_cmd(ar, &arg);
+			if (ret)
+				ath12k_warn(ar->ab,
+					    "failed set INIT Country code: %d\n", ret);
+		}
 
 		wiphy_lock(wiphy);
 		ath12k_mac_11d_scan_stop(ar);
-- 
2.34.1