Search Linux Wireless

[PATCH 3/4] wifi: ath12k: Decrease ath12k_sta_rc_update_wk() stack usage

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Jeff Johnson <quic_jjohnson@xxxxxxxxxxx>

Currently when building ath12k with llvm-18.1.7-x86_64 the following warning is
observed:

drivers/net/wireless/ath/ath12k/mac.c:4946:13: warning: stack frame size (1112) exceeds limit (1024) in 'ath12k_sta_rc_update_wk' [-Wframe-larger-than]

A major contributor to the stack usage in this function is:

        struct ath12k_wmi_peer_assoc_arg peer_arg;

Avoid the excess stack usage by dynamically allocating peer_arg
instead of declaring it on the stack.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

Signed-off-by: Jeff Johnson <quic_jjohnson@xxxxxxxxxxx>
Signed-off-by: Kalle Valo <quic_kvalo@xxxxxxxxxxx>
---
 drivers/net/wireless/ath/ath12k/mac.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/ath/ath12k/mac.c b/drivers/net/wireless/ath/ath12k/mac.c
index 2a30a11903c5..10293e9c1d49 100644
--- a/drivers/net/wireless/ath/ath12k/mac.c
+++ b/drivers/net/wireless/ath/ath12k/mac.c
@@ -4956,7 +4956,6 @@ static void ath12k_sta_rc_update_wk(struct wiphy *wiphy, struct wiphy_work *wk)
 	u32 changed, bw, nss, smps, bw_prev;
 	int err, num_vht_rates;
 	const struct cfg80211_bitrate_mask *mask;
-	struct ath12k_wmi_peer_assoc_arg peer_arg;
 	enum wmi_phy_mode peer_phymode;
 	struct ath12k_link_sta *arsta;
 	struct ieee80211_vif *vif;
@@ -4992,9 +4991,14 @@ static void ath12k_sta_rc_update_wk(struct wiphy *wiphy, struct wiphy_work *wk)
 	nss = min(nss, max(ath12k_mac_max_ht_nss(ht_mcs_mask),
 			   ath12k_mac_max_vht_nss(vht_mcs_mask)));
 
+	struct ath12k_wmi_peer_assoc_arg *peer_arg __free(kfree) =
+					kzalloc(sizeof(*peer_arg), GFP_KERNEL);
+	if (!peer_arg)
+		return;
+
 	if (changed & IEEE80211_RC_BW_CHANGED) {
-		ath12k_peer_assoc_h_phymode(ar, arvif, arsta, &peer_arg);
-		peer_phymode = peer_arg.peer_phymode;
+		ath12k_peer_assoc_h_phymode(ar, arvif, arsta, peer_arg);
+		peer_phymode = peer_arg->peer_phymode;
 
 		if (bw > bw_prev) {
 			/* Phymode shows maximum supported channel width, if we
@@ -5096,9 +5100,9 @@ static void ath12k_sta_rc_update_wk(struct wiphy *wiphy, struct wiphy_work *wk)
 			 * other rates using peer_assoc command.
 			 */
 			ath12k_peer_assoc_prepare(ar, arvif, arsta,
-						  &peer_arg, true);
+						  peer_arg, true);
 
-			err = ath12k_wmi_send_peer_assoc_cmd(ar, &peer_arg);
+			err = ath12k_wmi_send_peer_assoc_cmd(ar, peer_arg);
 			if (err)
 				ath12k_warn(ar->ab, "failed to run peer assoc for STA %pM vdev %i: %d\n",
 					    arsta->addr, arvif->vdev_id, err);
-- 
2.39.5





[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux