From: Ming Yen Hsieh <mingyen.hsieh@xxxxxxxxxxxx>
Fix incorrect parameters for the related channel information command.
Fixes: 86c051f2c418 ("wifi: mt76: mt7925: enabling MLO when the firmware supports it")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@xxxxxxxxxxxx>
Signed-off-by: Sean Wang <sean.wang@xxxxxxxxxxxx>
---
.../net/wireless/mediatek/mt76/mt7925/mcu.c | 23 +++++++++++++++++--
1 file changed, 21 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c
index 83f237d49c26..f6aa052ca802 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7925/mcu.c
@@ -1200,6 +1200,8 @@ int mt7925_mcu_set_mlo_roc(struct mt792x_bss_conf *mconf, u16 sel_links,
req.roc[i].bw_from_ap = CMD_CBW_20MHZ;
req.roc[i].center_chan = center_ch;
req.roc[i].center_chan_from_ap = center_ch;
+ req.roc[i].center_chan2 = 0;
+ req.roc[i].center_chan2_from_ap = 0;
/* STR : 0xfe indicates BAND_ALL with enabling DBDC
* EMLSR : 0xff indicates (BAND_AUTO) without DBDC
@@ -2177,11 +2179,27 @@ void mt7925_mcu_bss_rlm_tlv(struct sk_buff *skb, struct mt76_phy *phy,
req = (struct bss_rlm_tlv *)tlv;
req->control_channel = chandef->chan->hw_value;
req->center_chan = ieee80211_frequency_to_channel(freq1);
- req->center_chan2 = ieee80211_frequency_to_channel(freq2);
+ req->center_chan2 = 0;
req->tx_streams = hweight8(phy->antenna_mask);
req->ht_op_info = 4; /* set HT 40M allowed */
req->rx_streams = hweight8(phy->antenna_mask);
- req->band = band;
+ req->center_chan2 = 0;
+ req->sco = 0;
+ req->band = 1;
+
+ switch (band) {
+ case NL80211_BAND_2GHZ:
+ req->band = 1;
+ break;
+ case NL80211_BAND_5GHZ:
+ req->band = 2;
+ break;
+ case NL80211_BAND_6GHZ:
+ req->band = 3;
+ break;
+ default:
+ break;
+ }
switch (chandef->width) {
case NL80211_CHAN_WIDTH_40:
@@ -2192,6 +2210,7 @@ void mt7925_mcu_bss_rlm_tlv(struct sk_buff *skb, struct mt76_phy *phy,
break;
case NL80211_CHAN_WIDTH_80P80:
req->bw = CMD_CBW_8080MHZ;
+ req->center_chan2 = ieee80211_frequency_to_channel(freq2);
break;
case NL80211_CHAN_WIDTH_160:
req->bw = CMD_CBW_160MHZ;
--
2.25.1
