Search Linux Wireless

Re: [PATCH] wifi: ath11k: allow APs combination when dual stations are supported

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 12/4/2024 12:33 AM, Jose Ignacio Tornos Martinez wrote:
And you want setup sta + sap + sap, right?
Your proposed interface combination fails as well for me if I am just
setting 2APs.
When up the second sap will meet error? Could you pls share the error
logs?
This is the log that is appearing:
[   61.909165] 8021q: 802.1Q VLAN Support v1.8
[   62.227530] ath11k_pci 0000:01:00.0: failed to create vdev 3, reached max vdev limit 3
It is appearing after configuring both APs when only one AP is up and when
both are down (see my previous 'iw dev' outputs).

I'm not very sure if you add all interface with managed type, and do
"ifconfig xxx up" before running hostapd.
Yes, I am setting the link up before running hostapd.
You can try add second and third interface with
"iw dev xx interface add xx type __ap".
And yes, I am doing like that for both APs.
Pls try add interface with type __ap or directly use hostapd up the ap interfaces that will re-type managed to ap.

Please, take into account that everything is working with the old interface
configuration and when it is set with the parameter (no error log), but it
is not working for me with your interface combination.
f019f4dff2e4 ("wifi: ath11k: support 2 station interfaces") update about interface combination limits.

If chip support DBS, station interfaces max is 2 that why you can't up the 3rd managed type interface. You better add interface with ap type.

Have you tried with 2.4GHz band?

2.4GHz works fine also.
sh-5.1# iw dev
phy#0
        Interface wlan2
                ifindex 6
                wdev 0x3
                addr 12:03:7f:21:84:11
                ssid QSoftAP2
                type AP
                channel 6 (2437 MHz), width: 20 MHz, center1: 2437 MHz
                txpower 5.00 dBm
                multicast TXQ:
qsz-byt qsz-pkt flows drops marks overlmt hashcol tx-bytes tx-packets 0 0 0 0 0 0 0 0 0
        Interface wlan1
                ifindex 5
                wdev 0x2
                addr 02:03:7f:21:84:11
                ssid QSoftAP1
                type AP
                channel 6 (2437 MHz), width: 20 MHz, center1: 2437 MHz
                txpower 18.00 dBm
                multicast TXQ:
qsz-byt qsz-pkt flows drops marks overlmt hashcol tx-bytes tx-packets 0 0 0 0 0 0 0 0 0
        Interface wlan0
                ifindex 4
                wdev 0x1
                addr 00:03:7f:21:84:11
                type managed
                txpower 5.00 dBm
                multicast TXQ:
qsz-byt qsz-pkt flows drops marks overlmt hashcol tx-bytes tx-packets 0 0 0 0 0 0 0 0 0

Thanks

Best regards
Jose Ignacio






[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux