From: Rameshkumar Sundaram <quic_ramess@xxxxxxxxxxx> Currently for single radio devices (ah->num_radio == 1) ath12k_mac_op_add_interface() creates vdev and later hw scan and assign_vif_chanctx uses the same. For MLO, vdev create request should carry ML address which will not be known during ath12k_mac_op_add_interface() as vif will be marked as ML only after links are added to it. If hw scan is requested, the vdev will be deleted post hw scan and subsequent assign_vif_chanctx call will create new vdev with ML address. But in certain cases assign_vif_chanctx could be called without any prior hw scan request and reusing the previously created vdev causes a non-ML vdev to be used for an ML vif and firmware operates the vdev in non-ML mode. Fix this by deferring vdev creation for interface until hw scan or assign_vif_chanctx request is received from mac80211. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Rameshkumar Sundaram <quic_ramess@xxxxxxxxxxx> Signed-off-by: Kalle Valo <quic_kvalo@xxxxxxxxxxx> --- drivers/net/wireless/ath/ath12k/mac.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/drivers/net/wireless/ath/ath12k/mac.c b/drivers/net/wireless/ath/ath12k/mac.c index 364e9c6adc73..f85661534d9e 100644 --- a/drivers/net/wireless/ath/ath12k/mac.c +++ b/drivers/net/wireless/ath/ath12k/mac.c @@ -8131,14 +8131,9 @@ static int ath12k_mac_op_add_interface(struct ieee80211_hw *hw, vif->hw_queue[i] = ATH12K_HW_DEFAULT_QUEUE; vif->driver_flags |= IEEE80211_VIF_SUPPORTS_UAPSD; - /* For non-ml vifs, vif->addr is the actual vdev address but for - * ML vif link(link BSSID) address is the vdev address and it can be a - * different one from vif->addr (i.e ML address). - * Defer vdev creation until assign_chanctx or hw_scan is initiated as driver + /* Defer vdev creation until assign_chanctx or hw_scan is initiated as driver * will not know if this interface is an ML vif at this point. */ - ath12k_mac_assign_vif_to_vdev(hw, arvif, NULL); - return 0; } -- 2.39.5
