Correct spelling here and there as suggested by codespell.
Signed-off-by: Dmitry Antipov <dmantipov@xxxxxxxxx>
---
drivers/net/wireless/ath/ath9k/antenna.c | 2 +-
drivers/net/wireless/ath/ath9k/ar9002_hw.c | 2 +-
drivers/net/wireless/ath/ath9k/ar9003_hw.c | 2 +-
drivers/net/wireless/ath/ath9k/ar9003_mci.c | 4 ++--
drivers/net/wireless/ath/ath9k/ar9003_phy.h | 2 +-
drivers/net/wireless/ath/ath9k/channel.c | 2 +-
drivers/net/wireless/ath/ath9k/common-spectral.c | 2 +-
drivers/net/wireless/ath/ath9k/dfs.c | 2 +-
drivers/net/wireless/ath/ath9k/hif_usb.c | 2 +-
drivers/net/wireless/ath/ath9k/hw.c | 4 ++--
drivers/net/wireless/ath/ath9k/hw.h | 2 +-
drivers/net/wireless/ath/ath9k/mac.h | 2 +-
drivers/net/wireless/ath/ath9k/main.c | 2 +-
drivers/net/wireless/ath/ath9k/wow.c | 6 +++---
drivers/net/wireless/ath/ath9k/xmit.c | 2 +-
15 files changed, 19 insertions(+), 19 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/antenna.c b/drivers/net/wireless/ath/ath9k/antenna.c
index acc84e6711b0..e5e274bc9e68 100644
--- a/drivers/net/wireless/ath/ath9k/antenna.c
+++ b/drivers/net/wireless/ath/ath9k/antenna.c
@@ -193,7 +193,7 @@ static void ath_lnaconf_alt_good_scan(struct ath_ant_comb *antcomb,
static void ath_ant_set_alt_ratio(struct ath_ant_comb *antcomb,
struct ath_hw_antcomb_conf *conf)
{
- /* set alt to the conf with maximun ratio */
+ /* set alt to the conf with maximum ratio */
if (antcomb->first_ratio && antcomb->second_ratio) {
if (antcomb->rssi_second > antcomb->rssi_third) {
/* first alt*/
diff --git a/drivers/net/wireless/ath/ath9k/ar9002_hw.c b/drivers/net/wireless/ath/ath9k/ar9002_hw.c
index d08ea0b28530..b26224480041 100644
--- a/drivers/net/wireless/ath/ath9k/ar9002_hw.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_hw.c
@@ -395,7 +395,7 @@ static void ar9002_hw_init_hang_checks(struct ath_hw *ah)
ah->config.hw_hang_checks |= HW_MAC_HANG;
}
-/* Sets up the AR5008/AR9001/AR9002 hardware familiy callbacks */
+/* Sets up the AR5008/AR9001/AR9002 hardware family callbacks */
int ar9002_hw_attach_ops(struct ath_hw *ah)
{
struct ath_hw_private_ops *priv_ops = ath9k_hw_private_ops(ah);
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_hw.c b/drivers/net/wireless/ath/ath9k/ar9003_hw.c
index e9bd13eeee92..6595eca74997 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_hw.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_hw.c
@@ -1170,7 +1170,7 @@ static bool ar9003_hw_detect_mac_hang(struct ath_hw *ah)
return false;
}
-/* Sets up the AR9003 hardware familiy callbacks */
+/* Sets up the AR9003 hardware family callbacks */
void ar9003_hw_attach_ops(struct ath_hw *ah)
{
struct ath_hw_private_ops *priv_ops = ath9k_hw_private_ops(ah);
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mci.c b/drivers/net/wireless/ath/ath9k/ar9003_mci.c
index 2b9c07961cd7..7dd4377b7a23 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_mci.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_mci.c
@@ -637,7 +637,7 @@ static u32 ar9003_mci_wait_for_gpm(struct ath_hw *ah, u8 gpm_type,
* same time. Since BT's calibration doesn't happen
* that often, we'll let BT completes calibration then
* we continue to wait for cal_grant from BT.
- * Orginal: Wait BT_CAL_GRANT.
+ * Original: Wait BT_CAL_GRANT.
* New: Receive BT_CAL_REQ -> send WLAN_CAL_GRANT->wait
* BT_CAL_DONE -> Wait BT_CAL_GRANT.
*/
@@ -747,7 +747,7 @@ int ar9003_mci_end_reset(struct ath_hw *ah, struct ath9k_channel *chan,
* BT is sleeping. Check if BT wakes up during
* WLAN calibration. If BT wakes up during
* WLAN calibration, need to go through all
- * message exchanges again and recal.
+ * message exchanges again and recall.
*/
REG_WRITE(ah, AR_MCI_INTERRUPT_RX_MSG_RAW,
(AR_MCI_INTERRUPT_RX_MSG_REMOTE_RESET |
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.h b/drivers/net/wireless/ath/ath9k/ar9003_phy.h
index ad72a30b67c3..e13873fb8e2f 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.h
@@ -246,7 +246,7 @@
/*
- * MRC Feild Definitions
+ * MRC Field Definitions
*/
#define AR_PHY_SGI_DSC_MAN 0x0007FFF0
#define AR_PHY_SGI_DSC_MAN_S 4
diff --git a/drivers/net/wireless/ath/ath9k/channel.c b/drivers/net/wireless/ath/ath9k/channel.c
index 571062f2e82a..02237d106f8c 100644
--- a/drivers/net/wireless/ath/ath9k/channel.c
+++ b/drivers/net/wireless/ath/ath9k/channel.c
@@ -17,7 +17,7 @@
#include "ath9k.h"
/* Set/change channels. If the channel is really being changed, it's done
- * by reseting the chip. To accomplish this we must first cleanup any pending
+ * by resetting the chip. To accomplish this we must first cleanup any pending
* DMA, then restart stuff.
*/
static int ath_set_channel(struct ath_softc *sc)
diff --git a/drivers/net/wireless/ath/ath9k/common-spectral.c b/drivers/net/wireless/ath/ath9k/common-spectral.c
index 4b27445a5fb8..628eeec4b82f 100644
--- a/drivers/net/wireless/ath/ath9k/common-spectral.c
+++ b/drivers/net/wireless/ath/ath9k/common-spectral.c
@@ -734,7 +734,7 @@ void ath9k_cmn_spectral_scan_trigger(struct ath_common *common,
ATH9K_RX_FILTER_PHYRADAR |
ATH9K_RX_FILTER_PHYERR);
- /* TODO: usually this should not be neccesary, but for some reason
+ /* TODO: usually this should not be necessary, but for some reason
* (or in some mode?) the trigger must be called after the
* configuration, otherwise the register will have its values reset
* (on my ar9220 to value 0x01002310)
diff --git a/drivers/net/wireless/ath/ath9k/dfs.c b/drivers/net/wireless/ath/ath9k/dfs.c
index 3689e12db9f7..2fb73a5e1d51 100644
--- a/drivers/net/wireless/ath/ath9k/dfs.c
+++ b/drivers/net/wireless/ath/ath9k/dfs.c
@@ -79,7 +79,7 @@ static int ath9k_get_max_index_ht40(struct ath9k_dfs_fft_40 *fft,
const int DFS_UPPER_BIN_OFFSET = 64;
/* if detected radar on both channels, select the significant one */
if (is_ctl && is_ext) {
- /* first check wether channels have 'strong' bins */
+ /* first check whether channels have 'strong' bins */
is_ctl = fft_bitmap_weight(fft->lower_bins) != 0;
is_ext = fft_bitmap_weight(fft->upper_bins) != 0;
diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c
index 7265766cddbd..fe9abe8cd268 100644
--- a/drivers/net/wireless/ath/ath9k/hif_usb.c
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
@@ -1198,7 +1198,7 @@ static int ath9k_hif_request_firmware(struct hif_device_usb *hif_dev,
filename = FIRMWARE_AR9271;
/* expected fw locations:
- * - htc_9271.fw (stable version 1.3, depricated)
+ * - htc_9271.fw (stable version 1.3, deprecated)
*/
snprintf(hif_dev->fw_name, sizeof(hif_dev->fw_name),
"%s", filename);
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index e2bef099adb3..e6301ab768b1 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -2149,7 +2149,7 @@ static void ath9k_set_power_network_sleep(struct ath_hw *ah)
/* When chip goes into network sleep, it could be waken
* up by MCI_INT interrupt caused by BT's HW messages
- * (LNA_xxx, CONT_xxx) which chould be in a very fast
+ * (LNA_xxx, CONT_xxx) which could be in a very fast
* rate (~100us). This will cause chip to leave and
* re-enter network sleep mode frequently, which in
* consequence will have WLAN MCI HW to generate lots of
@@ -2544,7 +2544,7 @@ int ath9k_hw_fill_cap_info(struct ath_hw *ah)
pCap->tx_chainmask = ah->eep_ops->get_eeprom(ah, EEP_TX_MASK);
/*
- * For AR9271 we will temporarilly uses the rx chainmax as read from
+ * For AR9271 we will temporarily uses the rx chainmax as read from
* the EEPROM.
*/
if ((ah->hw_version.devid == AR5416_DEVID_PCI) &&
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index 450ab19b1d4e..e2cbf3f00da0 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -282,7 +282,7 @@ enum ath9k_hw_caps {
* an exact user defined pattern or de-authentication/disassoc pattern.
* @ATH9K_HW_WOW_PATTERN_MATCH_DWORD: device requires the first four
* bytes of the pattern for user defined pattern, de-authentication and
- * disassociation patterns for all types of possible frames recieved
+ * disassociation patterns for all types of possible frames received
* of those types.
*/
diff --git a/drivers/net/wireless/ath/ath9k/mac.h b/drivers/net/wireless/ath/ath9k/mac.h
index f03d792732da..16203e7ecf29 100644
--- a/drivers/net/wireless/ath/ath9k/mac.h
+++ b/drivers/net/wireless/ath/ath9k/mac.h
@@ -251,7 +251,7 @@ struct ath_desc {
* when the descriptor is specifically marked to generate
* an interrupt with this flag. Descriptors should be
* marked periodically to insure timely replenishing of the
- * supply needed for sending frames. Defering interrupts
+ * supply needed for sending frames. Deferring interrupts
* reduces system load and potentially allows more concurrent
* work to be done but if done to aggressively can cause
* senders to backup. When the hardware queue is left too
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index b92c89dad8de..dd7910782858 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1001,7 +1001,7 @@ static bool ath9k_uses_beacons(int type)
static void ath9k_vif_iter_set_beacon(struct ath9k_vif_iter_data *iter_data,
struct ieee80211_vif *vif)
{
- /* Use the first (configured) interface, but prefering AP interfaces. */
+ /* Use the first (configured) interface, but preferring AP interfaces. */
if (!iter_data->primary_beacon_vif) {
iter_data->primary_beacon_vif = vif;
} else {
diff --git a/drivers/net/wireless/ath/ath9k/wow.c b/drivers/net/wireless/ath/ath9k/wow.c
index 8d0b1730a9d5..ed4152cd44f0 100644
--- a/drivers/net/wireless/ath/ath9k/wow.c
+++ b/drivers/net/wireless/ath/ath9k/wow.c
@@ -60,7 +60,7 @@ static int ath9k_wow_add_disassoc_deauth_pattern(struct ath_softc *sc)
memset(dis_deauth_mask, 0, MAX_PATTERN_SIZE);
/*
- * Create Dissassociate / Deauthenticate packet filter
+ * Create Disassociate / Deauthenticate packet filter
*
* 2 bytes 2 byte 6 bytes 6 bytes 6 bytes
* +--------------+----------+---------+--------+--------+----
@@ -70,7 +70,7 @@ static int ath9k_wow_add_disassoc_deauth_pattern(struct ath_softc *sc)
* The above is the management frame format for disassociate/
* deauthenticate pattern, from this we need to match the first byte
* of 'Frame Control' and DA, SA, and BSSID fields
- * (skipping 2nd byte of FC and Duration feild.
+ * (skipping 2nd byte of FC and Duration field.
*
* Disassociate pattern
* --------------------
@@ -225,7 +225,7 @@ int ath9k_suspend(struct ieee80211_hw *hw,
ath9k_stop_btcoex(sc);
/*
- * Enable wake up on recieving disassoc/deauth
+ * Enable wake up on receiving disassoc/deauth
* frame by default.
*/
ret = ath9k_wow_add_disassoc_deauth_pattern(sc);
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index 35aa47a9db90..0a24439dd30d 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -557,7 +557,7 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq,
/*
* AR5416 can become deaf/mute when BA
* issue happens. Chip needs to be reset.
- * But AP code may have sychronization issues
+ * But AP code may have synchronization issues
* when perform internal reset in this routine.
* Only enable reset in STA mode for now.
*/
--
2.47.0
